Abstract:<p>Liquid monopropellant rocket engines are widely used in space propulsion and are developing in the direction of non-toxic and pollution-free propellants. The use of non-toxic monopropellants with a low decomposition rate makes the start-up and shutdown processes of the engines longer, and the gas inlet assumptions that were applicable to the calculation of hydrazine monopropellant engines cannot be used. Based on the steady-state calculation model of hydroxyl ammonium nitrate (HAN)-based monopropellant engine, we propose a combined model that considers decomposition of liquid monopropellant and non-equilibrium heat transfer between fluid and solid catalyst bed, and uses this model and the gas inlet hypothesis to calculate the working process of an HAN-based monopropellant rocket engine of 60 N thrust. The calculated results are compared with the test curve, and the results show that the decomposition of liquid monopropellant plays a key role in the starting and stopping processes. When the gas inlet assumption is adopted without considering the decomposition of the liquid monopropellant, the calculated start-up time is much shorter than the hot-firing test, and there is no tail-off section when shutting down. The pressure-rise and pressure-decay curve calculated by the combined model agree well with the test curve, and the maximum deviation during the steady state is less than 10%. For HAN-based monopropellant engines, the pressure rises slowly at the first start because the temperature of catalyst bed is lower, which results in a lower rate of decomposition. When restarted shortly after a shutdown, the pressure rises rapidly due to the high temperature of the catalyst bed and the high rate of decomposition. The HAN-based monopropellant can penetrate a few millimeters downstream of the injector, and there is a significant tail when the engine is shut down, which is caused by the continued decomposition of the remaining propellant after the shutdown.</p>

Numerical simulation of the transient process of monopropellant rocket engines

Decomposition and ignition of HAN-based monopropellants by electrolysis

Effect of catalytic bed porosity and mass flow rate on decomposition and combustion processes of a HAN-Based monopropellant thruster

Modeling of Spray Combustion and Heat Transfer of MMH/N2O4 in a Small Rocket Engine Using Different Mechanisms

Numerical simulation of reacting flow and fuel regression rate in N 2O/htpb hybrid rocket motor

Numerical Investigation of an Aerospace Thruster with ADN-based Liquid Propellant

Numerical Simulation of Wall Liquid Film in Small Bipropellant Rocket Engine

Experimental and Numerical Studies of Ammonium Dinitramide Based Liquid Propellant Combustion in Space Thruster

Numerical simulation of the unsteady combustion of solid rocket propellants at a harmonic pressure change

Numerical Investigation on New Engine Combustion Charactristic of Helicopter

Long-Duration Dynamic Numerical Simulation of Combustion and Flow in Hybrid Rocket Motors Considering Nozzle Erosion

Thermal and Electrolytic Decomposition and Ignition of HAN–Water Solutions

Computational Realization of Popping Impinging Sprays of Hypergolic Bipropellants by a Eulerian-Lagrangian Approach

Combustion performance and scale effect from N 2 O/HTPB hybrid rocket motor simulations

Numerical Analysis of Self-Excited Combustion Instabilities in a Small MMH/NTO Liquid Rocket Engine

A Droplet/wall Impact Model and Simulation of a Bipropellant Rocket Engine

Experimental Studies on Parametric Effects and Reaction Mechanisms in Electrolytic Decomposition and Ignition of HAN Solutions.

Characterization of an Ignition System for Nitromethane-Based Monopropellants

Numerical analysis on combustion instabilities in end-burning-grain solid rocket motors utilizing pressure-coupled response functions

Chemical Mechanism of MMH/NTO and Simulation in a Small Liquid Rocket Engine

Prediction of the fuel regression-rate in a HDPE single port hybrid rocket fed by liquid nitrous oxide