Abstract:We investigate the rf performance of several single-cell superconducting radio-frequency cavities subjected to low temperature heat treatment in nitrogen environment. The cavities were treated at temperature 120–165 °C for an extended period of time (24–48 h) either in high vacuum or in a low partial pressure of ultrapure nitrogen. The improvement in Q0 with a Q rise was observed when nitrogen gas was injected at ∼300 °C during the cavity cooldown from 800 °C and held at 165 °C , without any degradation in accelerating gradient over the baseline performance. The treatment was applied to several elliptical cavities with frequency ranging from 0.75 to 3.0 GHz, showing an improved quality factor as a result of low temperature nitrogen treatments. The Q rise feature is similar to that achieved by nitrogen alloying Nb cavities at higher temperature, followed by material removal by electropolishing. The surface modification was confirmed by the change in electronic mean free path and tuned with the temperature and duration of heat treatment. The decrease of the temperature-dependent surface resistance with increasing rf field, resulting in a Q rise, becomes stronger with increasing frequency and decreasing temperature. The data suggest a crossover frequency of ∼0.95 GHz above that the Q rise phenomenon occurs at 2 K. Some of these results can be explained qualitatively with an existing model of intrinsic field-dependence of the surface resistance with both equilibrium and nonequilibrium quasiparticle distribution functions. The change in the Q slope below 0.95 GHz may result from masking contribution of trapped magnetic flux to the residual surface resistance. https://doi.org/10.1103/PhysRevAccelBeams.27.062001 Published by the American Physical Society under the terms of the Creative Commons Attribution 4.0 International license. Further distribution of this work must maintain attribution to the author(s) and the published article's title, journal citation, and DOI. Published by the American Physical Society

Superconducting Nb-film LC resonator

Magnetic Field Tolerant Superconducting Spiral Resonators for Circuit QED

Flux coupled tunable superconducting resonator

Magnetic field resilient high kinetic inductance superconducting niobium nitride coplanar waveguide resonators

Electromagnetic properties of superconductive low-beta 325 MHz half-wave resonators at low RF field

Superconducting Resonators with Parasitic Electromagnetic Environments

Investigation on the temperature coefficient of frequency performance of LiNbO3 on quartz and glass surface acoustic wave resonators

Temperature, RF Field, and Frequency Dependence Performance Evaluation of Superconducting Niobium Half-Wave Cavity

Field, frequency and temperature dependence of the surface resistance of nitrogen diffused niobium superconducting radio frequency cavities

Characterizing Niobium Nitride Superconducting Microwave Coplanar Waveguide Resonator Array for Circuit Quantum Electrodynamics in Extreme Conditions

Characterization of low-loss hydrogenated amorphous silicon films for superconducting resonators

ZrNb(CO) RF superconducting thin film with high critical temperature in the theoretical limit

Niobate-on-Niobate Resonators with Aluminum Electrodes

A Spurious-Free SAW Resonator with Near-Zero TCF Using LiNbO3/SiO2/quartz

Tuning microwave losses in superconducting resonators

The effect of niobium thin film structure on losses in superconducting circuits

Loss mechanisms in superconducting thin film microwave resonators

Frequency-tunable High-Q Superconducting Resonators Via Wireless Control of Nonlinear Kinetic Inductance

RF surface resistance tuning of superconducting niobium via thermal diffusion of native oxide

Field, frequency, and temperature dependencies of the surface resistance of nitrogen diffused niobium superconducting radio frequency cavities

Surface acoustic wave resonators on thin film piezoelectric substrates in the quantum regime