Abstract:Abstract. A sensor based on a piezoelectric single crystal enables operation even under harsh environmental conditions. In addition to the sensor element, the packaging technology is crucial for sensor performance. In this paper, a suitable assembly and interconnection technology concept of Ca3TaGa3Si2O14 (CTGS) resonators for high-temperature applications is presented as a platform for future sensor assemblies. The concept described here has already been functionally tested as a temperature sensor (Schulz et al., 2021). The concept includes a sapphire base plate, a housing lid, and a spacer made from aluminium oxide (Al2O3). The substrate is metallised with platinum manufactured into thin film and thick film technology. The ceramic components are fused with glass solder. The connection of the resonator to the conductive tracks is realised by thermosonic bonding with 25 μm platinum wire. Initially, the stability of the metallisation must be investigated before subsequent electrical testing under high temperature. Diffusion processes play a major role in this temperature range, and the stability of the layer is a necessary condition for subsequent investigations. A suitable set of bonding parameters and the strength of the platinum bonds prior to and after thermal load is analysed. Shear tests are used to evaluate the quality of the ceramic materials fused with glass solder after thermal ageing. The dielectrical properties of sapphire and glass solder such as the isolation resistance, the relative permittivity, and the loss factor at high temperatures are evaluated using interdigital structures. The loss factor is measured on both bare interdigital structures and the samples coated with glass solder to make an estimation about the conductive behaviour up to 1000 ∘C. A ceramic lid for the sensor housing is attached by a high-temperature stable glass solder. Since platinum conductors are fed through this glass solder connection, the electrical conductivity of the glass solder is characterised at high temperature. Furthermore, the hermeticity of the assemblies is verified by means of helium leakage tests. These investigations are the basis for the implementation of an assembly and interconnection technology that is suitable for reliable operation under extreme temperature conditions. The packaging technology also offers further possibilities for pressure or chemical sensors that can withstand high-temperature loads.

Design, manufacture and temperature characterization of screen-printed acoustic sensors for monitoring the release of fission gases in experimental fuel rods of the Jules Horowitz reactor

Characterization and performance of an acoustic sensor for fission gas release characterization devoted to JHR environment measurements

Real-time detection and discrimination of radioactive gas mixtures using nanoporous inorganic scintillators

Development of quantitative detection method for mass spectrometry coupled to an infrared laser spectroscope (Picarro) to monitor in nitrogen matrix a complex gas mixture of H2 , He, CO, N2 , Ne, O2 , Ar, CO2 , H2 S, CH4 , C2 H4 , C2 H6 , C3 H6 , C3 H8 , i-C4 H10 , n-C4 H10 , and C5 H12

Design of an Instrumented Fuel Rod for Intra-pin Neutron Flux Measurements in the CROCUS Experimental Reactor

Implementation of Ultrasonic Sensing for High Resolution Measurement of Binary Gas Mixture Fractions

Design, fabrication and validation of an electrical conductivity principle based two-phase detection sensor array for molten lead (Pb) based heavy metal coolants up to 600^∘C

Assembly and interconnection technology for high-temperature bulk acoustic wave resonators

MOX-Based Resistive Gas Sensors with Different Types of Sensitive Materials (Powders, Pellets, Films), Used in Environmental Chemistry

High temperature ultrasonic transducers for imaging and measurements in a liquid Pb/Bi eutectic alloy

Gamma and neutron detector performance in a MOX fuel fabrication plant environment

3-D thermal and radiation-matter interaction simulations of a SiC solid-state detector for neutron flux measurements in JSI TRIGA Mark II research reactor

Application of sculptured Mn conical (Spiral+helical) thin films for monitoring N 2 -CO and N 2 -CO 2 gas mixtures: Gas ionization and field emission sensors

Characterising the Radionuclide Fingerprint of an Advanced Gas-Cooled Nuclear Power Reactor

Non-contact measurement of partial gas pressure and distribution of elemental composition using energy-resolved neutron imaging

Proton-Conducting Nanocrystalline Ceramics for High-Temperature Hydrogen Sensing

Fabrication and Electromechanical Characterization of Silicon Nanomechanical Membrane Flexure MEMS Sensor for Gas Sensing Applications

Development of Fe$_2$O$_3$/YSZ ceramic plates for cryogenic operation of resistive-protected gaseous detectors

Dielectric Properties of Materials Used for Microwave-Based NOx Gas Dosimeters

Position Reconstruction of Bubble Formation in Liquid Nitrogen using Piezoelectric Sensors