Abstract:In recent years, there has been a rapid growth in new technologies within nuclear medicine and PET diagnostics, particularly in the field of radiopharmaceutical dose preparation. These advancements are driven by the integration of automatic algorithms into the process. This evolution has brought about significant improvements in the efficiency and accuracy of radiopharmaceutical dose preparation. These automatic algorithms utilize state-of-the-art technologies to streamline the process and ensure precise and tailored doses for patients. The integration of these advanced technologies has revolutionized the field, allowing for more effective and personalized treatment options in nuclear medicine and PET diagnostics. By employing automatic radiopharmaceutical dose dispensers (ARDDs), radiation exposure to technologists is minimized while also mitigating the risk of potential infections for patients. Ionization chambers are currently the most used detectors to measure the activity of radiopharmaceuticals in ARDDs. However, they present certain limitations, including size constraints. This study is part of an international endeavor to develop a new approach for evaluating radiopharmaceutical activity in an ARDD named KAR l 100 . A new approach was used to develop a scintillation detector by linking a PVT detector to a SiPMs array consisting of four elements, each having an active surface of 6 × 6 mm with a bias voltage of 30 V. The detection system's amplified output was then fed to a single-channel analyzer called Enviro, developed by Tema Sinergie S.p.A in Italy. The counts per second (CPS) detected by the detector were studied using WinTAM software allowing for the radionuclide's activity concentration to be read out at run-time. Three widely used medical radioisotopes, 18 F, 11 C and 68 Ga, were used to evaluate the performance of the detector in terms of linearity and repeatability of the measurements. Half-life and linear response were evaluated over a wide range of activities with different decay schemes. Data analysis was conducted, resulting in half-lives of the 18 F, 11 C and 68 Ga radioisotopes of 109.75 ± 0.35, 20.62 ± 0.34 and 67.82 ± 0.25 min, respectively, with calculated deviations of 0.0167%, 1.00% and 0.29% from expected values. The linear response of the detector over the entire range of desired activity concentrations was confirmed after data correction for the detector dead time. Calibration of the detector combined with the dispenser system was carried out in parallel investigations to provide the required device properties for reference applications in nuclear medicine. Furthermore, Monte Carlo simulations using FLUKA code were performed to investigate the contribution of beta particles in addition to gamma radiations to assess the influence of beta particles on the calibration factors. For better accuracy, a shielding was designed to prevent any beta particles from reaching the detector.

Real-time detection and discrimination of radioactive gas mixtures using nanoporous inorganic scintillators

Efficient radioactive gas detection by scintillating porous metal–organic frameworks

In-situ quantification of gamma-ray and beta-only emitting radionuclides

OmniscintiTM: simultaneous detection of alpha/beta/gamma/fast and thermal neutron with a triple-layered phoswich detector

Evaluation of Scintillator Detection Materials for Application within Airborne Environmental Radiation Monitoring

A novel method for accurate and real-time quantification of radiopharmaceutical activity in automated dose dispensers

New-designed Measurement Device for Radon and Thoron Activity Concentration Based on Gas Direct Detection.

Effect of natural gamma background radiation on portal monitor radioisotope unmixing

Characterization of a medium-sized CLLB scintillator: single neutron/gamma detector for radiation monitoring

Investigation of gamma-ray sensitivity of neutron detectors based on thin converter films

Design, manufacture and temperature characterization of screen-printed acoustic sensors for monitoring the release of fission gases in experimental fuel rods of the Jules Horowitz reactor

Advancements in Remote Alpha Radiation Detection: Alpha-Induced Radio-Luminescence Imaging with Enhanced Ambient Light Suppression

Compact Beta-Gamma Radioxenon Detection System with Improved Energy Resolution Using PIPS Detector

Optimized measurement of radium-226 concentration in liquid samples with radon-222 emanation

Organic scintillator-based alpha/beta detector for radiological decontamination

A plastic scintillator and HPGe β-γ coincidence detection system

Gas scintillation nuclear particle detectors

Organic–inorganic hybrid perovskite scintillators for mixed field radiation detection

New liquid scintillation counter development using Silicon Photomultipliers

Development of quantitative detection method for mass spectrometry coupled to an infrared laser spectroscope (Picarro) to monitor in nitrogen matrix a complex gas mixture of H2 , He, CO, N2 , Ne, O2 , Ar, CO2 , H2 S, CH4 , C2 H4 , C2 H6 , C3 H6 , C3 H8 , i-C4 H10 , n-C4 H10 , and C5 H12

A remote reactor monitoring with plastic scintillation detector