Abstract:Sn60Pb40 alloy powders were fabricated using the planar flow casting (PFC) atomization process. By using OM, SEM and EPMA, the characteristics of the morphologies and microstructures of the powders have been investigated. It is observed that the environment of ambient gas in the atomization box has great effects on the morphology of the alloy powders. The microstructures of Sn60Pb40 alloy powders produced by the PFC atomization process are completely composed of eutectic, which is made up of both oversaturated α solid solution and β solid solution. The microstructures of small size powders are extraordinarily undeveloped dendritic eutectic, in which the large majority of the α phase appears nearly spherical, evidently since the cooling rate is higher and the under-cooling is larger. As for the large size powders, since the cooling rate and undercooling are relatively low, lamellar α phase apparently increases in the eutectic microstructures of these powders, and there is even typical lamellar eutectic structure clearly observed in some micro-areas. After remelting tests by DTA, the microstructures of small size powders are transformed, which become composed of large crumby α phase and eutectic (α+β), while those of large size powders change into classical tin-lead structures of primary α phase plus lamellar eutectic (α+β). By studying the microstructures of tin-lead alloy powders, a model has been proposed to predict the microstructure formation of Sn60Pb40 alloy powders.

Analysis of the Particle Size and Morphology of Tin Powder Synthesized by the Electrolytic Method

Synthesis of Tin Oxide Nanoparticles by Precipitation Process: Effects of pH and Temperature on the Particle Size and Morphology

Synthesis of Sn Nanoparticles and Their Size Effect on the Melting Point

Microstructural Evolution of Tin Nanoparticles During in Situ Sodium Insertion and Extraction

Influences of Tin Oxide Surface Modification on the Morphology and Performance of Sintered Ag/SnO2 Composite Powders

Effect of surfactants on the chemical preparation of tin-silver-copper nanoparticles

Effect of Tin Particle Size on Sps Sintering Process

Synthesis and Low-Temperature Sintering of Tin-Doped Silver Nanoparticles

Morphology and Microstructure of Rapidly Solidified Tin-Lead Alloy Powders

Influences of Antimony Concentration on Nanometer-sized Tin Dioxide Powders

Electrochemistry of Tin Deposition from Methanesulfonic Acid

Synthesis of Nanocrystalline SnO2 Powders with Oxidation of Granulated Tin-hydrothermal Method

The Process for Preparation of Electroplnted Tin Coating

Size-Controllable Synthesis of Monodispersed Sno2 Nanoparticles and Application in Electrocatalysts

Synthesis of Sn-3.5ag Nanoparticles of Tiny Sizes

Tin Pest in Lead-Free Solders? Fundamental Studies on the Effect of Impurities on Phase Transformation Kinetics

Synthesis and Dsc Study on Sn3.5ag Alloy Nanoparticles Used for Lower Melting Temperature Solder

Preparation of textural lamellar tin deposits via electrodeposition

Tin recovery from tin slag using electrolysis method

Effect of Process Conditions on the Preparation of Copper Powders by Electro-Deposition

Effect Of Agitation On Tin-Lead Alloy Deposition In A Methane Sulfonate System