Abstract:This research has demonstrated that SiO 2 impregnation under high vacuum pressure of − 90 kPa can significantly reduce porosity by almost 10%, and improve the mechanical and viscoelastic properties of spruce wood under dry and saturated states. Characterization methods, such as impact test, DMA, SEM, EDS, porosity and SAXS tests were conducted on non-treated and − 90 kPa treated spruce wood samples under dry, saturated and submerged states to analyze the synergistic effect of high vacuum SiO 2 impregnation pressure on wood properties. The results showed that high vacuum impregnation pressure had a significant positive reinforcing effect on wood's properties. It increased the impact resistance of wood under dry and saturated conditions. Additionally, the high vacuum impregnation technique was able to overcome the water-induced softening effect and caused a significant increase in the storage modulus through uniform dispersion of the SiO 2 particles in the wood's vascular structure. Consequently, the impregnation reinforced the wood and ameliorated its capacity to absorb energy. High vacuum impregnation was also able to counteract the plasticizing effect of the water molecules and significantly increased the loss modulus by increasing the internal friction and cohesion of the wood components with the addition of the nanoparticles to the vascular system, which increased the wood's capacity to transform and dissipate energy. Quantitatively and qualitatively, impregnation under a vacuum pressure of − 90 kPa exhibited an effective obstruction of the vascular structure of spruce wood. In all conditions, high vacuum-impregnated samples showed significant enhancements over non-treated samples. This research demonstrated that high vacuum SiO 2 impregnation is an effective wood processing technique. Multiple materials and applications could benefit from this research wherein high strain-rate deformations are expected to occur or when simultaneous elastic behaviour of wood and its damping energy is needed. This study could also pave the way for research on the synergistic effect of SiO 2 impregnation and water absorption on the viscoelastic behaviour of wood.

Dewatering characteristics of Juglans mandshurica wood using supercritical carbon dioxide: A comparison with conventional drying

Dewatering of Juglans mandshurica Wood Using Supercritical Carbon Dioxide

Mechanical and Water Soaking Properties of Medium Density Fiberboard with Wood Fiber and Soybean Protein Adhesive.

High-Pressure Treatment of Chinese Fir Wood: Effect on Density, Mechanical Properties, Humidity-Related Moisture Migration, and Dimensional Stability

The study of physico-mechanical properties of SiO2-impregnated wood under dry and saturated conditions

A cyclic (intermittent) drying schedule for Macassar ebony—the prevention of collapse deformation and the utilization of mechano-sorptive creep gradient

Effect of supercritical CO2 treatment and kiln drying on collapse in Eucalyptus nitens wood

Scalable and Sustainable Approach Toward Highly Compressible, Anisotropic, Lamellar Carbon Sponge

Analysis on the diffusion and mechanical properties of eucalyptus dried via supercritical carbon dioxide

The Characteristics of Moisture and Shrinkage of Eucalyptus urophylla × E. Grandis Wood during Conventional Drying

Effect of Compression Combined with Steam Treatment on the Porosity, Chemical Compositon and Cellulose Crystalline Structure of Wood Cell Walls

Effect of superheated steam pressure on the physical and mechanical properties of sandwich-densified wood

LIQUID PERMEABILITY OF EUCALYPTUS UROPHYLLA WOOD TREATED WITH DIFFERENT DRYING METHODS

Comprehensive evaluation of sewage sludge dewatering performance with supercritical CO2: Parameters optimization, mechanism, feasibility assessment

Effects of pre-steaming treatment on high-temperature and low-humidity drying characteristics of super-heavy timber with boxed-heart of Korean red pine and Douglas-fir

A novel two-step strategy to construct multifunctional superhydrophobic wood by liquid-vapor phase deposition of methyltrimethoxysilane for improving moisture resistance, anti-corrosion and mechanical strength

Moisture changes and surface checking development during drying of Masson pine wood

Superheated steam drying of single wood particles: A characteristic drying curve model deduced from continuum model simulations and assessed by experiments

Development of super dimensional stable poplar structure with fire and mildew resistance by delignification/densification of wood with highly aligned cellulose molecules

Effects of supercritical carbon dioxide under different conditions on mechanical properties and energy evolution of coal

Thin-layer drying characteristics and modeling of lignite under supercritical carbon dioxide extraction and the evolution of pore structure and reactivity