Abstract:There is a need for numerical models capable of predicting local accumulation of hydrogen near stress concentrators and crack tips to prevent and mitigate hydrogen assisted fracture in steels. The experimental characterisation of trapping parameters in metals, which is required for an accurate simulation of hydrogen transport, is usually performed through the electropermeation test. In order to study grain size influence and grain boundary trapping during permeation, two modelling approaches are explored; a 1D Finite Element model including trap density and binding energy as input parameters and a polycrystalline model based on the assignment of a lower diffusivity and solubility to the grain boundaries. Samples of pure iron after two different heat treatments - 950C for 40 minutes and 1100C for 5 minutes - are tested applying three consecutive rising permeation steps and three decaying steps. Experimental results show that the finer grain microstructure promotes a diffusion delay due to grain boundary trapping. The usual methodology for the determination of trap densities and binding energies is revisited in which the limiting diluted and saturated cases are considered. To this purpose, apparent diffusivities are fitted including also the influence of boundary conditions and comparing results provided by the constant concentration with the constant flux assumption. Grain boundaries are characterised for pure iron with a binding energy between 37.8 and 39.9 kJ/mol and a low trap density but it is numerically demonstrated that saturated or diluted assumptions are not always verified, and a univocal determination of trapping parameters requires a broader range of charging conditions for permeation. The relationship between surface parameters, i.e. charging current, recombination current and surface concentrations, is also studied.

Comparison of hydrogen diffusivities measured by electrochemical permeation and temperature-programmed desorption in cold-rolled pure iron

On the relative efficacy of electropermeation and isothermal desorption approaches for measuring hydrogen diffusivity

DIFFUSIVITY OF HYDROGEN IN STEELS AT LOW TEMPERATURES

Simulation of hydrogen permeation through pure iron for trapping and surface phenomena characterisation

Effect of Cold Deformation on the Hydrogen Permeation in a Dual-Phase Advanced High-Strength Steel

Analysis of hydrogen permeation tests considering two different modelling approaches for grain boundary trapping in iron

Effect of Cold Deformation on the Hydrogen Permeation Behavior of X65 Pipeline Steel

Hydrogen Economy vs. Hydrogen Embrittlement: Indirect Electrochemical Determination of Hydrogen Diffusion in Steel

Investigating the origins of the 'double rise' shape in hydrogen permeation transients on pure iron

Atomic Insight into the Hydrogen Diffusion in Al-doped Iron Structures

Ab-initio molecular dynamics simulation of hydrogen diffusion in $α$-iron

Hydrogen diffusion in α-Fe2O3: Implication for an effective hydrogen diffusion barrier

Enhanced Hydrogen Entry in Iron at Low Anodic and Low Cathodic Polarizations in Neutral and Alkaline Solutions

Towards Quantitative Analysis of Deuterium Absorption in Ferrite and Austenite during Electrochemical Charging by Comparing Cyclic Voltammetry and Cryogenic Transfer Atom Probe Tomography

The effect of hydrogen on the mechanical properties of high purity iron I. Softening and hardening of high purity iron by hydrogen charging during tensile deformation

Effect of Plastic Deformation at Room Temperature on Hydrogen Diffusion of Hot-Rolled S30408

Experimental and numerical analysis of hydrogen diffusion behaviors in an ultra-fine bainitic steel

Control of electrochemical parameters for hydrogen permeation of CLF-1 steel

Modelling of hydrogen diffusion in a steel containing micro-porosity. Application to the permeation experiment

Analysis of hydrogen diffusion in the three stage electro-permeation test