Abstract:There is a need for numerical models capable of predicting local accumulation of hydrogen near stress concentrators and crack tips to prevent and mitigate hydrogen assisted fracture in steels. The experimental characterisation of trapping parameters in metals, which is required for an accurate simulation of hydrogen transport, is usually performed through the electropermeation test. In order to study grain size influence and grain boundary trapping during permeation, two modelling approaches are explored; a 1D Finite Element model including trap density and binding energy as input parameters and a polycrystalline model based on the assignment of a lower diffusivity and solubility to the grain boundaries. Samples of pure iron after two different heat treatments - 950C for 40 minutes and 1100C for 5 minutes - are tested applying three consecutive rising permeation steps and three decaying steps. Experimental results show that the finer grain microstructure promotes a diffusion delay due to grain boundary trapping. The usual methodology for the determination of trap densities and binding energies is revisited in which the limiting diluted and saturated cases are considered. To this purpose, apparent diffusivities are fitted including also the influence of boundary conditions and comparing results provided by the constant concentration with the constant flux assumption. Grain boundaries are characterised for pure iron with a binding energy between 37.8 and 39.9 kJ/mol and a low trap density but it is numerically demonstrated that saturated or diluted assumptions are not always verified, and a univocal determination of trapping parameters requires a broader range of charging conditions for permeation. The relationship between surface parameters, i.e. charging current, recombination current and surface concentrations, is also studied.

Investigating the origins of the 'double rise' shape in hydrogen permeation transients on pure iron

Simulation of hydrogen permeation through pure iron for trapping and surface phenomena characterisation

Enhanced Hydrogen Entry in Iron at Low Anodic and Low Cathodic Polarizations in Neutral and Alkaline Solutions

Analysis of hydrogen diffusion in the three stage electro-permeation test

Analysis of hydrogen permeation tests considering two different modelling approaches for grain boundary trapping in iron

Hydrogen Permeation Behavior at Different Positions in the Normal Direction of X42 and X52 Pipeline Steels

Hydrogen Economy vs. Hydrogen Embrittlement: Indirect Electrochemical Determination of Hydrogen Diffusion in Steel

Modelling of hydrogen diffusion in a steel containing micro-porosity. Application to the permeation experiment

Role of microstructure on electrochemical hydrogen permeation properties in advanced high strength steels

Effect of Cold Deformation on the Hydrogen Permeation in a Dual-Phase Advanced High-Strength Steel

Effect of Hydrostatic Pressure on Hydrogen behavior on the surface of X70 pipeline steel

Effect of Cold Deformation on the Hydrogen Permeation Behavior of X65 Pipeline Steel

Control of electrochemical parameters for hydrogen permeation of CLF-1 steel

Hydrogen isotope plasma-driven permeation through RAFM steel: isotope exchange and helium irradiation effect

On the relative efficacy of electropermeation and isothermal desorption approaches for measuring hydrogen diffusivity

Towards Quantitative Analysis of Deuterium Absorption in Ferrite and Austenite during Electrochemical Charging by Comparing Cyclic Voltammetry and Cryogenic Transfer Atom Probe Tomography

Formation of Plasma-Nitrided Barrier Layers Against Hydrogen Absorption and Diffusion in Pure Iron

Hydrogen diffusion and trapping in nickel-based alloy 625: An electrochemical permeation study

Hydrogen Permeation in X65 Steel under Cyclic Loading

A new perspective on hydrogen diffusion and hydrogen embrittlement in low-alloy high strength steel