Abstract:The radiation-induced segregation (RIS) and microstructure evolution such as dislocation loops and cavities are major microstructural causes for the irradiation-assisted stress corrosion cracking (IASCC) of austenitic stainless steel (SS) core components. While a couple of studies have been reported on the irradiation induced damage in nuclear grade (NG) austenitic SS, the evolution of dislocation loop density and size and its correlation with the mechanical properties have still remained incompletely understood. In addition, the correlation between the segregation at the grain boundary and that at the dislocation loop has received limited attentions. In particular, there is still a lack of a systematic study of the irradiation damage in domestically fabricated NG austenitic SS. In this work, the proton-irradiation induced microstructural damage in domestically fabricated 304NG SS was characterized, in an effort to correlate the RIS and the dislocation loop density and size with the irradiation dose, as well as the dislocation loop density and size with the radiation-induced hardening. The results revealed that the radiationinduced microstructure damage was mainly dislocation loops with a few micro-voids. The loop density was in the order of 10(22) m(-3) with an average size of <10 nm. The square root of the product of loop density and size (Nd)(0.5), scaled linearly with the square root of irradiation dose with a factor of 6.8x10(3) dpa(-0.5) . mm(-1). The loops were believed to be mainly responsible for the hardening in 304NG SS, which also scaled linearly with (Nd)(0.5) with a factor of 1.16x10(-2) HV0.025 . mm. A comparative analysis about the segregation at the grain boundary and at the dislocation loop was conducted. While the depletion of Cr and enrichment of Ni at the dislocation loop and grain boundary showed no difference, the enrichment of Si at the dislocation loop could be of about 6 times of that at the grain boundary. In addition, the loop density and loop size, as well as RIS and radiation-induced hardening were all increased by a higher dose and tended to saturate by a dose of 3.0 similar to 5.0 dpa.

A comparison study of void swelling in additively manufactured and cold-worked 316L stainless steels under ion irradiation

Impact of sub-grain structure on radiation resistance in additively manufactured 316L stainless steels: An atomic insight into the mechanism

Damage behavior of additive manufacturing 316L stainless steel irradiated with Fe ions

Response of Solidification Cellular Structures in Additively Manufactured 316 Stainless Steel to Heavy Ion Irradiation: an in Situ Study

Study of Irradiation Damage in Domestically Fabricated Nuclear Grade Stainless Steel

Swelling in previously neutron-irradiated commercial Fe-Cr-Ni based alloys under electron irradiation

Heavy ion irradiation response of an additively manufactured 316LN stainless steel

An unified model for dislocations interacting with complex-shape voids in irradiated metals

Radiation Defects Formed in Ion-Irradiated 316l Stainless Steel Model Alloys with Different Si Additions

Microstructural characterization of cold-worked 316 stainless steel flux thimble tubes irradiated up to 100 dpa in a commercial Pressurized Water Reactor

A Model for Dose Dependence of the Void Swelling in Electron-Irradiated Alloys

Compositionally graded specimen made by laser additive manufacturing as a high-throughput method to study radiation damages and irradiation-assisted stress corrosion cracking

Experimental Characterization and Strengthening Mechanism of Process-Structure-property of Selective Laser Melted 316 L

Effects of ion irradiation on microstructure of 316L stainless steel strengthened by disperse nano TiC through selective laser melting

The Mechanisms of Inhibition Effects on Bubble Growth in He-Irradiated 316L Stainless Steel Fabricated by Selective Laser Melting

Effect of helium bubbles on irradiation hardening of additive manufacturing 316L stainless steel under high temperature He ions irradiation

Effects of pre-implanted helium on void formation in electron-irradiated stainless steels

Stress Corrosion Cracking Behavior of 316L Manufactured by Different Additive Manufacturing Techniques in Hydrofluoric Acid Vapor

Thermal stability and microstructural evolution of additively manufactured 316L stainless steel by laser powder bed fusion at 500–800 °C

Reveal the hot deformation behaviour and microstructure evolution in additively manufactured 316L stainless steel

On the Thermal Stability of Dislocation Cellular Structures in Additively Manufactured Austenitic Stainless Steels: Roles of Heavy Element Segregation and Stacking Fault Energy