Abstract:Safety is an extremely important factor when developing Li metal anodes for high-energy-density battery systems. Lithium dendrite formation is one of the major phenomena leading to serious safety issues and poor lifetimes of lithium batteries. In this study, we applied a combined surface modification strategy to obtain stable dendrite-free Li anodes for solid-state lithium batteries (SSLBs). We coated a polydopamine (PDA)-functionalized vapor-grown carbon nanofiber (VGCF)/lithiated-Nafion (LiNf) polymer composite (/LiNf) as a protective layer onto a patterned Li metal surface to provide selective lithiophilic sites for Li deposition. We also applied a sandwich-type hybrid solid polymer electrolyte (HSE) membrane (PVDF-HFP+LiTFSI+SN/+LiTFSI+SN/PVDF-HFP+LiTFSI+SN) to enhance ionic transport between the anode and cathode due to its high Li+ ionic conductivity (ca. 3.68 × 10–4 S cm–1). The resulting SSLB assembled using a high-voltage pristine LiNi0.8Co0.1Mn0.1O2 (NCM811) cathode and the surface-modified Li anode delivered a higher discharge capacity at 0.1C and excellent cyclability at a rate of 0.2C (capacity retention >80% for 100 cycles) when compared with the corresponding SSLB incorporating the unmodified Li anode. Furthermore, the SSLB featuring a Li2MoO4-modified NCM811 cathode exhibited outstanding cyclability, with retention greater than 83% after 200 cycles at a rate of 0.2C. This attractive electrochemical performance resulted from the prevention of structural variation and dendrite formation of the cathode and anode by the Li2MoO4 coating and the /LiNf protective layer, respectively. Hence, this strategy might be suitable for developing high-voltage battery systems with high safety and long-term stability in future SSLB applications.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c02097.Preparation and characterization of the sandwich-type HSE membranes; SEM images of VGCF and samples; XPS survey scan of VGCF and composite samples; symmetry cell comparison data of bare Li and pcLi; SEM images of bare Li and pcLi after symmetry cell performances; charge/discharge curves of NCM811 cathode-based full-cells; magnified view of the Coulombic efficiency of the full-cells; XPS analysis of /LiNf-coated Cu electrodes for before and after 20 plating/stripping cycles at 0.2 mA cm–2; TEM images of NCM811 and LMO-NCM811 samples; EDX spectrum of LMO-NCM811 samples; SEM images of the NCM811 and LMO-NCM811 cathode after cycling performances; charge–discharge curves of full-cell SSLBs based on LMO-NCM811|HSE|Li (PDF)This article has not yet been cited by other publications.

CNTs/LiV 3 O 8 /Y 2 O 3 Composites with Enhanced Electrochemical Performances as Cathode Materials for Rechargeable Solid-State Lithium Metal Batteries

Double-Layered Multifunctional Composite Electrolytes for High-Voltage Solid-State Lithium-Metal Batteries

LATP-coated LiNi 0.8 Co 0.1 Mn 0.1 O 2 Cathode with Compatible Interface with Ultrathin PVDF-reinforced PEO-LLZTO Electrolyte for Stable Solidstate Lithium Batteries

Versatile Inorganic/Polymer Composite Electrolyte Added with 2-Methylsuccinic Anhydride via a Solvent-Free Preparation Method for High-Performance All-Solid-State Li-Metal Batteries: High Voltage, Long Cycle Life, and Room-Temperature Operation

3D poly(vinylidene fluoride–hexafluoropropylen) nanofiber-reinforced PEO-based composite polymer electrolyte for high-voltage lithium metal batteries

LATP-coated LiNi0.8Co0.1Mn0.1O2 cathode with compatible interface with ultrathin PVDF-reinforced PEO-LLZTO electrolyte for stable solid-state lithium batteries

Composite Polymer Electrolytes Based on PVA/PAN for All-Solid-State Lithium Metal Batteries Operated at Room Temperature

Integration of Localized Electric-Field Redistribution and Interfacial Tin Nanocoating of Lithium Microparticles toward Long-Life Lithium Metal Batteries

In Situ Construction of Li3N-enriched Interface Enabling Ultra-Stable Solid-State LiNi0.8Co0.1Mn0.1O2/lithium Metal Batteries

Enabling High-Voltage Lithium Metal Batteries under Practical Conditions

High-Performance Solid-State Lithium Metal Batteries of Garnet/Polymer Composite Thin-Film Electrolyte with Domain-Limited Ion Transport Pathways.

3D core-shell nanofibers framework and functional ceramic nanoparticles synergistically reinforced composite polymer electrolytes for high-performance all-solid-state lithium metal battery

Patterning and a Composite Protective Layer Provide Modified Li Metal Anodes for Dendrite-Free High-Voltage Solid-State Lithium Batteries

A "Concentrated Ionogel‐in‐Ceramic" Silanization Composite Electrolyte with Superior Bulk Conductivity and Low Interfacial Resistance for Quasi‐Solid‐State Li Metal Batteries

A Solid‐State Battery Cathode with a Polymer Composite Electrolyte and Low Tortuosity Microstructure by Directional Freezing and Polymerization

Li0.35La0.55TiO3 Nanofibers Enhanced Poly(vinylidene Fluoride)-Based Composite Polymer Electrolytes for All-Solid-State Batteries.

Highly Conductive and Stable Composite Polymer Electrolyte with Boron Nitride Nanotubes for All-Solid-State Lithium Metal Batteries

Composite polymer electrolyte reinforced by graphitic carbon nitride nanosheets for room-temperature all-solid-state lithium batteries

Coaxially MXene-confined solid-state electrolyte for flexible high-rate Lithium metal battery

Integrated Structure of Cathode and Double-Layer Electrolyte for Highly Stable and Dendrite-Free All-Solid-State Li-Metal Batteries

Lithium-Rich Li1.2ni0.13co0.13mn0.54o2 Oxide Coated By Li3po4 And Carbon Nanocomposite Layers As High Performance Cathode Materials For Lithium Ion Batteries