Abstract:In the present work, three kinds of precipitates with different morphologies, structures, sizes, and volume fractions were obtained via energetically-tuning the microstructures of the nano-precipitated CoCrFeNiTi0.2 high-entropy alloy (HEA). Subjected to the heavy cold rolling immediately after homogeneous precipitation, L12 structured spherical nano-particles with an average size of 16.5 nm rapidly grow into 200 nm-sized spherical ones due to Ostwald ripening. On the other hand, superfluous mechanical energy storage energetically facilitates the phase transformation from spherical L12 to rod-shaped D024 structures for initially formed nano-precipitates. Besides, some other newly formed nano-precipitates with an average size of 6.5 nm are available, originating from heavily plastically deformed-induced nucleated sites. Multi-scale precipitates interact with dislocations in different ways. The strengthening provided by dislocations cutting through smaller nano-particles and bypassing grown ones account for 57.7% and 42.3% of precipitation strengthening, respectively, while rod-shaped precipitates can act as equivalent interfaces to hinder dislocation movement. Their synergistic effect has achieved remarkable strengthening and toughening. Specially, dislocation slips dominate at 298 K, while stacking faults (SFs) assist plastic deformation at 77 K. Compared with 298 K, the yield strength (YS) and ultimate tensile strength (UTS) of the current HEAs at 77 K are increased by 38.9% and 38.2% to 1 GPa and 1.5 GPa, respectively, and the tensile strain is slightly increased to 35% instead of loss, realizing excellent strength and plasticity combination. Theoretically established strengthening models agree well room-temperature and cryogenic yield strengths experimentally. Moreover, the tensile elongation is effectively predicted by the Whitehouse-Clyne model. This strengthening strategy of energetically-tuning polymorphous precipitates provides the basic guidance to develop high-performance nano-precipitated alloys. The current strengthening and plasticity models can be employed to well predict the mechanical properties of such kinds of alloys at cryogenic temperatures.

Concurrent Recrystallization and Precipitation for Combination of Superior Precipitation and Grain Boundary Hardening in Co37Cr20Ni37Ti3Al3 High-Entropy Alloy

Ultrahigh Cryogenic Strength and Exceptional Ductility in Ultrafine-Grained CoCrFeMnNi High-Entropy Alloy with Fully Recrystallized Structure

Study on Precipitation in (cocrfemnni)90al6ti4 High Entropy Alloy

Effect of initial grain structure on the concurrent precipitation and recrystallization of Co37Cr20Ni37Ti3Al3 high-entropy alloy

A Novel High-Entropy Alloy with Exceptional Strength and Elongation Via Bimodal Grains and Lamellar Nano-Precipitates

Hierarchical Grain Size and Nanotwin Gradient Microstructure for Improved Mechanical Properties of a Non-Equiatomic CoCrFeMnNi High-Entropy Alloy

Achieving well-balanced strength and ductility via dual nanoscale precipitate structures in Co-free high-entropy alloys

Enhanced Mechanical Performance of Grain Boundary Precipitation-Hardened High-Entropy Alloys Via a Phase Transformation at Grain Boundaries

Precipitation-hardened High Entropy Alloys with Excellent Tensile Properties

Precipitation Hardening in CoCrFeNi-based High Entropy Alloys

Improving mechanical properties of an FCC high-entropy alloy by γ′ and B2 precipitates strengthening

Superior hydrogen embrittlement resistance of CoCrNi-based medium-entropy alloy via coherent precipitation and grain boundary strengthening

Excellent Strength-Ductility Synergy Assisted by Dislocation Dipole-Induced Plasticity in Co-free Precipitate-Strengthened Medium-Entropy Alloy

Carbide Precipitation Strengthening in Fine-Grained Carbon-Doped FeCoCrNiMn High Entropy Alloy

Hexagonal Closed-Packed Precipitation Enhancement in a NbTiHfZr Refractory High-Entropy Alloy

A micromechanical study on the effects of precipitation on the mechanical properties of CoCrFeMnNi high entropy alloys with various annealing temperatures

Achieving High Strength and Good Ductility in a Nb-Containing CoCrNi-Based High-Entropy Alloy by Grain Boundary and Precipitates Strengthening

Tailoring Mechanical and Electrochemical Properties of the Cr15Fe20Co35Ni20Mo10 High-Entropy Alloy via the Competition between Recrystallization and Precipitation Processes

Remarkable cryogenic strengthening and toughening in nano-coherent CoCrFeNiTi0.2 high-entropy alloys via energetically-tuning polymorphous precipitates

Microstructure evolution and mechanical behavior of a CoCrFeNiMn0.75Cu0.25 high-entropy alloy by thermo-mechanical treatment

Strength-ductility Synergy of Al0.3CoCrFeNiCu High-Entropy Alloy Via Cold Rolling and Subsequent Annealing