Abstract:Ammonia has been proposed as a replacement for fossil fuels. Like hydrogen, emissions from the combustion of ammonia are carbon-free. Unlike hydrogen, ammonia is more energy dense, less explosive, and there exists extensive experience in its distribution. However, ammonia has a low flame speed and combustion emits nitrogen oxides. Ammonia is produced via the Haber-Bosch process which consumes large amounts of fossil fuels and requires high temperatures and pressures. A life cycle assessment to determine potential environmental advantages and disadvantages of using ammonia is necessary. In this work, emissions data from experiments with generating heat from tangential swirl burners using ammonia cofired with methane employing currently available technologies were utilized to estimate the environmental impacts that may be expected. Seven ammonia sources were combined with two methane sources to create 14 scenarios. The impacts from these 14 scenarios were compared to those expected from using pure methane. The results show that using ammonia from present-day commercial production methods will result in worse global warming potentials than using methane to generate the same amount of heat. Only two scenarios, methane from biogas combined with ammonia from hydrogen from electricity and nuclear power via electrolysis and subsequent ammonia synthesis using nitrogen from the air, showed reductions in global warming potential. Subsequent analysis of other environmental impacts for these two scenarios showed potentially lower impacts for respiratory organics, terrestrial acidification-nutrification and aquatic acidification depending on how the burner is operated. The other eight environmental impacts were worse than the methane scenario because of activities intrinsic to the generation of electricity via wind power and nuclear fission. The results show that generating heat from a tangential swirl burner using ammonia currently available technologies will not necessarily result in improved environmental benefits in all categories. Improvements in renewable energy technologies could change these results positively. Other means of producing ammonia and improved means of converting ammonia to energy must continue to be explored.

Chemical Reactor Network modeling of ammonia–hydrogen combustion in a gas turbine: stochastic sensitivity analysis

A Comparative Environmental Life Cycle Assessment of the Combustion of Ammonia/Methane Fuels in a Tangential Swirl Burner

Multi-Objective Optimization and Chemical Reactor Network Modelling to Estimate the Minimum NOx and Ammonia Slip in an Aviation Combustor

Enhancement of the Ammonia Kinetic Mechanism for Nitrogen-Based Pollutant Chemistry

Modelling Ammonia-Hydrogen-Air Combustion and Emission Characteristics of a Generic Swirl Burner

International Conference on Applied Energy – ICAE 2015 Ammonia , Methane and Hydrogen for Gas Turbines

Chemical reactor network modeling in the context of solid fuel combustion under oxy-fuel atmospheres

Kinetics Modeling of NOx Emissions Characteristics of a NH3/H2 Fueled Gas Turbine Combustor

Prediction of NOx emission from two-stage combustion of NH 3 –H 2 mixtures under various conditions using artificial neural networks

Kinetics Modeling of NOx Emission of Oxygen-Enriched and Rich-Lean-staged Ammonia Combustion under Gas Turbine Conditions

Kinetics modeling of NO x emission of oxygen-enriched and rich-lean-staged ammonia combustion under gas turbine conditions

Dynamic Simulation Analysis and Optimization of Green Ammonia Production Process under Transition State

Techno-economic analysis of ammonia cracking for large scale power generation

RANS simulations on combustion and emission characteristics of a premixed NH3/H-2 swirling flame with reduced chemical kinetic model

Optimizing heat transfer predictions in HCNG engines: A novel model validation and comparative study via quasi-dimensional combustion modeling and artificial neural networks

Numerical simulation of ammonia/methane/air combustion using reduced chemical kinetics models

Modelling of gas network transient flows with multiple hydrogen injections and gas composition tracking

Enhanced Modeling of Back-Mixing in Chemical Reactor Networks

RANS simulations on combustion and emission characteristics of a premixed NH3/H2 swirling flame with reduced chemical kinetic model

CFD analysis of municipal solid waste combustion using detailed chemical kinetic modelling

A novel data-driven reduced order modelling methodology for simulation of humid blowout in wet combustion applications