Abstract:Directed relation graph with error propagation (DRGEP) method combined with extensive validation for 0D, 1D and 2D CFD modeling supported by sensitivity and Rate-Of-Production (ROP) analyses are implemented for comparative study of detailed and reduced kinetic mechanisms for CH4+ H-2 combustion. To this end, two detailed kinetic mechanisms, namely AramcoMech 2.0 and recently updated Konnov mechanism, were validated using available measurements of ignition delay times and laminar burning velocities for hydrogen, methane and hydrogen+ methane fuel mixtures. For all experimental conditions visited, both detailed mechanisms demonstrated good and close to each other performance. Two-stage DRGEP method and reaction reduction based on computational singular perturbation (CSP) were then implemented to achieve two skeletal models: 25 species and 105 reactions for AramcoMech 2.0 and 27 species and 107 reactions for the Konnov model. The conditions for skeletal models generation cover.= 0.5-2.0, temperature 900-2000 K, and pressure 1-50 bar. Turbulent non-premixed flames of CH4+ H-2 in the Jet in Hot Co-flow (JHC) burner for two different oxygen concentrations in a co-flow were modeled using both skeletal models. 2-D RANS simulations with OpenFOAM code of the flame structure using the two skeletal kinetic mechanisms are similar except for the mass fraction of OH and CO. To elucidate the differences between two skeletal mechanisms generated using the same reduction method, extensive validation for 0D, 1D and 2D CFD modeling were supported by sensitivity analysis for detailed and skeletal reaction models. Good agreement between the skeletal and detailed mechanisms was found in top reactions as well as their sensitivity coefficients, which affect auto-ignition process and laminar flame propagation. Further chemical and sensitivity analysis of the structure of laminar flames demonstrate that three important reactions, i.e. CO+ OH= CO2+ H, H-2+ OH= H+ H2O, and CH4+ OH= CH3+ H2O have different rate constants in the Aramco and Konnov models that may contribute to the differences in the prediction of CO concentration profiles. The simulation predictions for CO concentrations are improved for laminar flames and JHC flame by using a 25-species modified version in which these rate constants were taken from the Konnov mechanism. It was noted that DRGEP method applied to different detailed kinetic schemes generate skeletal models with different, non-overlapping lists of retained species. The presence of CH2CHO in the Aramco 25-species skeletal mechanism and its absence in the Konnov 27-species mechanism, and the presence of CH, CH2, CH2CO in the latter and their absence in the former mechanism were analysed and explained using Rate-OfProduction analysis for conditions found in the CFD simulations.

Enhanced Modeling of Back-Mixing in Chemical Reactor Networks

Kinetic Modeling with Automatic Reaction Network Generator, an Application to Naphtha Steam Cracking

Chemical reactor network modeling in the context of solid fuel combustion under oxy-fuel atmospheres

Numerical Simulation of Hypersonic Reaction Flows with Nonlinear Coupled Constitutive Relations

Direct Coupling of Microkinetic and Reactor Models Using Neural Networks

Development of a multiphase chemical reactor network method as a tool for simulating biomass gasification in fluidized beds

Comparative Analysis of Detailed and Reduced Kinetic Models for CH4 + H2 Combustion

An Ingenious Characterization of Reaction Network Using Sub-Network Reconstruction.

Equivalent Reactor Network Model for the Modeling of Fluid Catalytic Cracking Riser Reactor

A new reduced geometric model for simulation and design of NETmix reactors: LoopNUB

Modeling and Simulation of Chemically Reacting Flows in Gas-Solid Catalytic and Non-Catalytic Processes

An Automatic Method for Generation of CFD-Based 3D Compartment Models: Towards Real-Time Mixing Simulations

Chemical reactor network application to emissions prediction for the annular turbine combustor

An Integrated Methodology for the Modeling of Fluid Catalytic Cracking (FCC) Riser Reactor

Numerical simulation of flow field and residence time of nanoparticles in a 1000-ton industrial multi-jet combustion reactor

Pore network modelling of slender packed bed reactors

Molecular Modelling for Reactor Design

Modelling and Optimisation of Distributed-Parameter Batch and Semi-Batch Reactor Systems

Modeling of Reactive Gas–solid Flows in Riser Reactors Using a Multi-Scale Chemical Reaction Model

Preliminary Combustor Design Using a Network Approach Based on Chemical Reactor Modeling

Chemical Reactor Network modeling of ammonia–hydrogen combustion in a gas turbine: stochastic sensitivity analysis