Abstract:Distillation units require huge amounts of energy for the separation of the multicomponent mixtures involved in refineries and petrochemical industries. Keeping the same separation standards, energy savings can be achieved in multiple ways. The overall efficiency of the distillation column system is determined from the trade-offs of the Operating Expenditures (OPEX) and Capital investment cost (CAPEX), as there is a strong interaction between the distillation columns and the Heat Exchanger Network (HEN) of the interconnecting streams. Therefore, the highly complex optimization of this trade-off necessitates moving towards process integration solutions. Individually, both distillation columns and HEN are well-defined rigorous problems and numerous methodologies have been developed for finding optimal solutions. The integrative problem however is larger in scale, computational demanding and less robust. In this paper, a systematic optimization methodology for process integration of a multicomponent distillation column complex is presented. The highly nonlinear and time consuming rigorous models of the distillation column are being substituted with simple surrogate models that generate operating responses with adequate accuracy. Moreover, another surrogate model is included in the Mixed Integer Non-Linear Programming (MINLP) formulation to enhance the accuracy of the results by considering the phase changes of the process streams involved in the HEN. The methodology is applied on two case studies of the aromatics separation PARAMAX complex and the results illustrate significant reductions on the Total Annualized Cost. With a scope limited to the benzene and toluene columns, the gain reaches about 15%.

Modelling and Optimisation of Distributed-Parameter Batch and Semi-Batch Reactor Systems

Computational Fluid Dynamics Simulations and Experimental Validation of Macromixing and Flow Characteristics in Low-Density Polyethylene Autoclave Reactors

Numerical Simulations of a Bubbling Fluidized Bed Reactor with an Energy Minimization Multiscale Bubble Based Model: Effect of the Mesoscale

Systematic Optimization Methodology for Simultaneous Process Design and Heat Exchanger Network Synthesis with Surrogate Models – Application to Distillation Column Complex

Dynamic Optimization of Multivariable Endothermic Reaction in Cascade CSTR

Simulation And Optimization Of The Molecular Weight Distribution In A Non-Ideal Polymerization Reactor

Using CFD and Machine Learning to Explore Chaotic Mixing in Laminar Diameter-Transformed Stirred Tanks

Research on Rigorous Mechanism Modeling for Distillation Column Series under Wide Variation of Feed Condition

Operational Optimization of Polymerization Reactors with Computational Fluid Dynamics and Embedded Molecular Weight Distribution Using the Iterative Surrogate Model Method

Topological optimization for tailored designs of advection-diffusion-reaction porous reactors based on pore scale modeling and simulation

Development in modeling the macro-scale phenomena of fluidized bed reactor for polyolefin production

Characterization and modeling of micromixing performance in micropore dispersion reactors

Optimization of chemical reactor feed by simulations based on a kinetic approach

Multi-objective topology optimization and flow characteristics study of the microfluidic reactor

Three-distribution-parameter General Model for Reactor Network Synthesis

Numerical Simulation of Mixing in Complex Reaction System via Computational Fluid Dynamics

Modeling large-scale bioreactors with diffusion equations. Part I: Predicting axial dispersion coefficient and mixing times

Design-Model Of Gas-Liquid Semibatch Reactors Based On The Film Theory

Methodology for designing solution polymerization reactors based on multiscale model construction and simulation

Mathematical Models for Macro-Scale Mass Transfer in Airlift Loop Reactors

Two-Dimensional Modelling and Validation of the Mass Flow in a Mixing Stirred Reactor