Abstract:Highlights•The stability of noncovalent PDMS-PDMS binding is dependent on the binding energy instead of the binding strength.•The noncovalent binding of a special formulation of PDMS is sufficient for reversible assembly of leak-free microfluidic devices.•The noncovalent binding method enables loading multiple types of cells into PDMS parts before assembling into the final device.•The PDMS device can be easily dissembled due to the reversible nature of the noncovalent binding for retrieving cells.The conventional approach for fabricating polydimethylsiloxane (PDMS) microfluidic devices is a lengthy and inconvenient procedure and may require a clean-room microfabrication facility often not readily available. Furthermore, living cells can't survive the oxygen-plasma and high-temperature-baking treatments required for covalent bonding to assemble multiple PDMS parts into a leak-free device, and it is difficult to disassemble the devices because of the irreversible covalent bonding. As a result, seeding/loading cells into and retrieving cells from the devices are challenging. Here, we discovered that decreasing the curing agent for crosslinking the PDMS prepolymer increases the noncovalent binding energy of the resultant PDMS surfaces without plasma or any other treatment. This enables convenient fabrication of leak-free microfluidic devices by noncovalent binding for various biomedical applications that require high pressure/flow rates and/or long-term cell culture, by simply hand-pressing the PDMS parts without plasma or any other treatment to bind/assemble. With this method, multiple types of cells can be conveniently loaded into specific areas of the PDMS parts before assembly and due to the reversible nature of the noncovalent bonding, the assembled device can be easily disassembled by hand peeling for retrieving cells. Combining with 3D printers that are widely available for making masters to eliminate the need of photolithography, this facile yet rigorous fabrication approach is much faster and more convenient for making PDMS microfluidic devices than the conventional oxygen plasma-baking-based irreversible covalent bonding method.Graphical abstractA special formulation of PDMS with high noncovalent binding energy is discovered allowing for reversible assembly of PDMS microfluidic devices. Combining with 3D printing, this enables handy fabrication of leak-free microfluidic devices without clean-room facility and oxygen plasma. Cells can be conveniently loaded/seeded into the PDMS parts before their assembly into a final device and the device can be easily peeled open by hand to retrieve cells. This method my greatly facilitate the widespread utilization of PDMS microfluidic devices as a useful tool for various biomedical applications.Download : Download high-res image (218KB)Download : Download full-size image

Reagent‐Free Covalent Immobilization of Biomolecules in a Microfluidic Organ‐On‐A‐Chip

Non-swelling hydrogel-based microfluidic chips.

An Approach for Irreversible Bonding of PDMS-PS Hybrid Microfluidic Chips at Room Temperature

Reversibly-bonded microfluidic devices for stable cell culture and rapid, gentle cell extraction

Air Plasma-Enhanced Covalent Functionalization of Poly(methyl methacrylate): High-Throughput Protein Immobilization for Miniaturized Bioassays

A technique of a "lab-on-a-chip" for developing a novel biosensor in viewpoint of health-care (PHC) applications and biological regulator sensors

Noncovalent reversible binding-enabled facile fabrication of leak-free PDMS microfluidic devices without plasma treatment for convenient cell loading and retrieval

A microfluidic platform for sequential ligand labeling and cell binding analysis

Luminal Surface Plasma Treatment of Closed Cylindrical Microchannels: A Tool toward the Creation of On-Chip Vascular Endothelium

Construction of a Biomimetic Surface on Microfluidic Chips for Biofouling Resistance

Atmospheric Pressure Plasma Functionalization of Sealed PDMS Microfluidics: Application to Capillary Pumping and Enhanced Cell Growth.

Patterning Microbeads Inside Poly(dimethylsiloxane) Microfluidic Channels and Its Application for Immobilized Microfluidic Enzyme Reactors

From Chips-in-Lab to Point-of-Care Live Cell Device: Development of a Microfluidic Device for On-Site Cell Culture and High-Throughput Drug Screening

On‐Demand Bioactivation of Inert Materials with Plasma‐Polymerized Nanoparticles

Aryl-diazonium salts offer a rapid and cost-efficient method to functionalize plastic microfluidic devices for increased immunoaffinity capture

A Novel Automation System For Microplasma Surface Patterning And Biologics Printing

Surface Modification and Bonding of Poly(dimethylsiloxane) by Oxygen Plasma Treatment under Medium Vacuum

Automated Reagent-Dispensing System for Microfluidic Cell Biology Assays.

A low-fouling, self-assembled, graft co-polymer and covalent surface coating for controlled immobilization of biologically active moieties

Hydrophilic Biopolymer Grafted on Poly(dimethylsiloxane) Surface for Microchip Electrophoresis.

Stable Microstructured Network for Protein Patterning on a Plastic Microfluidic Channel: Strategy and Characterization of On-Chip Enzyme Microreactors