Abstract:Highlights•The stability of noncovalent PDMS-PDMS binding is dependent on the binding energy instead of the binding strength.•The noncovalent binding of a special formulation of PDMS is sufficient for reversible assembly of leak-free microfluidic devices.•The noncovalent binding method enables loading multiple types of cells into PDMS parts before assembling into the final device.•The PDMS device can be easily dissembled due to the reversible nature of the noncovalent binding for retrieving cells.The conventional approach for fabricating polydimethylsiloxane (PDMS) microfluidic devices is a lengthy and inconvenient procedure and may require a clean-room microfabrication facility often not readily available. Furthermore, living cells can't survive the oxygen-plasma and high-temperature-baking treatments required for covalent bonding to assemble multiple PDMS parts into a leak-free device, and it is difficult to disassemble the devices because of the irreversible covalent bonding. As a result, seeding/loading cells into and retrieving cells from the devices are challenging. Here, we discovered that decreasing the curing agent for crosslinking the PDMS prepolymer increases the noncovalent binding energy of the resultant PDMS surfaces without plasma or any other treatment. This enables convenient fabrication of leak-free microfluidic devices by noncovalent binding for various biomedical applications that require high pressure/flow rates and/or long-term cell culture, by simply hand-pressing the PDMS parts without plasma or any other treatment to bind/assemble. With this method, multiple types of cells can be conveniently loaded into specific areas of the PDMS parts before assembly and due to the reversible nature of the noncovalent bonding, the assembled device can be easily disassembled by hand peeling for retrieving cells. Combining with 3D printers that are widely available for making masters to eliminate the need of photolithography, this facile yet rigorous fabrication approach is much faster and more convenient for making PDMS microfluidic devices than the conventional oxygen plasma-baking-based irreversible covalent bonding method.Graphical abstractA special formulation of PDMS with high noncovalent binding energy is discovered allowing for reversible assembly of PDMS microfluidic devices. Combining with 3D printing, this enables handy fabrication of leak-free microfluidic devices without clean-room facility and oxygen plasma. Cells can be conveniently loaded/seeded into the PDMS parts before their assembly into a final device and the device can be easily peeled open by hand to retrieve cells. This method my greatly facilitate the widespread utilization of PDMS microfluidic devices as a useful tool for various biomedical applications.Download : Download high-res image (218KB)Download : Download full-size image

Noncovalent reversible binding-enabled facile fabrication of leak-free PDMS microfluidic devices without plasma treatment for convenient cell loading and retrieval

An Approach for Irreversible Bonding of PDMS-PS Hybrid Microfluidic Chips at Room Temperature

Easy-disassembly Bonding of PDMS Used for Leak-Tight Encapsulation of Microfluidic Devices

Inexpensive and rapid fabrication of PDMS microfluidic devices for biological testing applications using low cost commercially available 3D printers

Enhancement of the surface free energy of PDMS for reversible and leakage-free bonding of PDMS–PS microfluidic cell-culture systems

Reversibly-bonded microfluidic devices for stable cell culture and rapid, gentle cell extraction

A simple and low-cost approach for irreversible bonding of polymethylmethacrylate and polydimethylsiloxane at room temperature for high-pressure hybrid microfluidics

Fabrication of Micro Pneumatic Valves with Double-Layer Elastic Poly(dimethylsiloxane) Membranes in Rigid Poly(methyl Methacrylate) Microfluidic Chips

Facile Patterning of Thermoplastic Elastomers and Robust Bonding to Glass and Thermoplastics for Microfluidic Cell Culture and Organ-on-Chip

Fabrication of PDMS microfluidic devices using nanoclay-reinforced Pluronic F-127 as a sacrificial ink

Tunable and Reversible Gelatin‐Based Bonding for Microfluidic Cell Culture

Polymeric Microfluidic Devices Fabricated Using Epoxy Resin for Chemically Demanding and Day-Long Experiments

Making Healthcare Accessible: A Rapid Clean-Room-Free Fabrication Strategy for Microfluidics-Driven Biosensors Based on Coupling Stereolithography and Hot Embossing

Fabrication of Microfluidic Manifold by Precision Extrusion Deposition and Replica Molding for Cell-Laden Device

Composite Elastomer-Enabled Rapid Photofabrication of Microfluidic Devices

Less Is More: Oligomer Extraction and Hydrothermal Annealing Increase PDMS Adhesion Forces for Materials Studies and for Biology-Focused Microfluidic Applications

Fabrication of 3D-printed molds for polydimethylsiloxane-based microfluidic devices using a liquid crystal display-based vat photopolymerization process: printing quality, drug response and 3D invasion cell culture assays

Reagent‐Free Covalent Immobilization of Biomolecules in a Microfluidic Organ‐On‐A‐Chip

Reversible bonding in thermoplastic elastomer microfluidic platforms for harvestable 3D microvessel networks

Rapid Prototyping of Thermoplastic Microfluidic 3D Cell Culture Devices by Creating Regional Hydrophilicity Discrepancy

Thermoplastic Elastomer (TPE)-Poly(Methyl Methacrylate) (PMMA) Hybrid Devices for Active Pumping PDMS-Free Organ-on-a-Chip Systems