Urinary diversion to the augmented and valved rectum: preliminary results with a novel surgical procedure.

Nils G. Kock,Mohamed A. Ghoneim,K. Lycke,Mohamed R. Mahran

DOI: https://doi.org/10.1016/S0022-5347(17)42049-0

1988-12-01

Abstract:

What problem does this paper attempt to address?

Chemical Modification on Top of Nanotopography to Enhance Surface Properties of PDMS

Jueyu Li,Min Wang,Yanbin Shen

DOI: https://doi.org/10.1016/j.surfcoat.2011.09.052

2012-01-01

Abstract:In the present study we report the surface modification of polydimethylsiloxane (PDMS) via combining both physical and chemical modification routes. Well defined nanostructures were created on PDMS surface through anodized aluminum oxide (AAO) template method. On top of the nanostructures, polyvinyl alcohol (PVA) was coated after the nano patterned PDMS was exposed to air plasma. The influence of the combined modification on surface properties of PDMS was examined by ATR-FTIR and water contact angle measurement. The impact of plasma pretreatment time and storage time in ambient environment were investigated, and property of films with or without nanostructures was compared. Experimental results show that long-term stable hydrophilic surfaces of PDMS can be achieved by PVA coating and be further improved by the surface nanostructures. The modified PDMS was also used for cell culture. The results indicate that both nanostructuring and chemically modifying the PDMS surface improves cell growth. Additionally, combination of these surface modifications has an additive effect on cell proliferation.
RGD Peptide-Conjugated Poly(dimethylsiloxane) Promotes Adhesion, Proliferation, and Collagen Secretion of Human Fibroblasts.

Bin Li,Jianxin Chen,James H. -C. Wang

DOI: https://doi.org/10.1002/jbm.a.30847

2006-01-01

Journal of Biomedical Materials Research Part A

Abstract:A novel technique for conjugating Arg-Gly-Asp (RGD) peptides to poly(dimethylsiloxane) (PDMS) surfaces as well as its application to cell culture is presented in this paper. This technique performs RGD conjugation to PDMS through photochemical immobilization of functional NHS groups to PDMS surface followed with linking RGD peptide to the surface via coupling reaction with NHS. A bifunctional photolinker, N-sulfosuccinimidyl-6-(4'-azido-2'-nitrophenylamino)hexanoate (sulfo-SANPAH), was used to conjugate RGD peptide to the surface. Compared to existing methods for peptide conjugation to PDMS, this technique is convenient, efficient, and free of organic contamination to PDMS surfaces. It can also be used to conjugate other peptides or proteins to most polymeric materials. In addition, cell culture studies showed that the RGD-conjugated PDMS surfaces promoted the adhesion, proliferation, and collagen production of human skin fibroblasts (HSFs). Finally, the RGD-conjugated PDMS surfaces are resistant to autoclaving and UV irradiation, which enables them to be repeatedly used in cell culture studies.
Surface Modification of PDMS-Based Microfluidic Devices with Collagen Using Polydopamine as a Spacer to Enhance Primary Human Bronchial Epithelial Cell Adhesion

Mohammadhossein Dabaghi,Shadi Shahriari,Neda Saraei,Kevin Da,Abiram Chandiramohan,Ponnambalam Ravi Selvaganapathy,Jeremy A. Hirota

DOI: https://doi.org/10.3390/mi12020132

IF: 3.4

2021-01-26

Micromachines

Abstract:Polydimethylsiloxane (PDMS) is a silicone-based synthetic material used in various biomedical applications due to its properties, including transparency, flexibility, permeability to gases, and ease of use. Though PDMS facilitates and assists the fabrication of complicated geometries at micro- and nano-scales, it does not optimally interact with cells for adherence and proliferation. Various strategies have been proposed to render PDMS to enhance cell attachment. The majority of these surface modification techniques have been offered for a static cell culture system. However, dynamic cell culture systems such as organ-on-a-chip devices are demanding platforms that recapitulate a living tissue microenvironment’s complexity. In organ-on-a-chip platforms, PDMS surfaces are usually coated by extracellular matrix (ECM) proteins, which occur as a result of a physical and weak bonding between PDMS and ECM proteins, and this binding can be degraded when it is exposed to shear stresses. This work reports static and dynamic coating methods to covalently bind collagen within a PDMS-based microfluidic device using polydopamine (PDA). These coating methods were evaluated using water contact angle measurement and atomic force microscopy (AFM) to optimize coating conditions. The biocompatibility of collagen-coated PDMS devices was assessed by culturing primary human bronchial epithelial cells (HBECs) in microfluidic devices. It was shown that both PDA coating methods could be used to bind collagen, thereby improving cell adhesion (approximately three times higher) without showing any discernible difference in cell attachment between these two methods. These results suggested that such a surface modification can help coat extracellular matrix protein onto PDMS-based microfluidic devices.

chemistry, analytical,nanoscience & nanotechnology,instruments & instrumentation,physics, applied
Polydopamine-collagen complex to enhance the biocompatibility of polydimethylsiloxane substrates for sustaining long-term culture of L929 fibroblasts and tendon stem cells

Qian Li,Lihong Sun,Lei Zhang,Zhigang Xu,Yuejun Kang,Peng Xue

DOI: https://doi.org/10.1002/jbm.a.36254

Abstract:Polydimethylsiloxane (PDMS) is a commercialized polymer extensively used in the fabrication of versatile microfluidic microdevices for studies in cell biology and tissue engineering. However, the inherent surface hydrophobicity of PDMS is not optimal for cell culture and thus restrains its applications for investigation of long-term behaviors of fibroblasts and stem cells. To improve the surface biocompatibility of PDMS, a facile technique was developed by modifying the PDMS surface with polydopamine-collagen (COL/PDA) complex. The successful synthesis of COL/PDA was verified through proton nuclear magnetic resonance spectroscopy. Compared to surface coating solely with COL or PDA, the surface wettability was significantly improved on COL/PDA-modified PDMS substrates based on water contact angle characterizations. The modified PDMS surface remarkably enhanced the initial adhesion and long-term proliferation of L929 fibroblasts and tendon stem cells (TSCs). Additionally, the effects of COL/PDA coating on cell viability and apoptosis were further investigated under prolonged incubation. We found that the COL/PDA coating on PDMS resulted in a substantial increase of cell viability compared to native PDMS, and the cell apoptosis was considerably impeded on the modified PDMS. This study demonstrated that COL/PDA coating can effectively enhance the surface biocompatibility of PDMS as verified by the enhanced adhesion and long-term proliferation of L929 fibroblasts and TSCs. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 408-418, 2018.
Motor city blues.

R. Haugh

2003-09-01

Abstract:With its safety net hospital in peril, Detroit had a choice: fundamentally reform its public health system or watch it collapse. Cities nationwide face a similar dilemma.
Mechanism of Adhesion of Natural Polymer Coatings to Chemically Modified Siloxane Polymer

Emmanuel Joseph,Shatruhan Singh Rajput,Shivprasad Patil,Anuya Nisal

DOI: https://doi.org/10.1021/acs.langmuir.1c00047

IF: 3.9

2021-03-09

Langmuir

Abstract:Surface coatings play an important role in improving the performance of biomedical implants. Polydimethylsiloxane (PDMS) is a commonly used material for biomedical implants, and surface-coated PDMS implants frequently face problems such as delamination or cracking of the coating. In this work, we have measured the performance of nano-coatings of the biocompatible protein polymer silk fibroin (SF) on pristine as well as modified PDMS surfaces. The PDMS surfaces have been modified using oxygen plasma treatment and 3-amino-propyl-triethoxy-silane (APTES) treatment. Although these techniques of PDMS modification have been known, their effects on adhesion of SF nano-coatings have not been studied. Interestingly, testing of the coated samples using a bulk technique such as tensile and bending deformation showed that the SF nano-coating exhibits improved crack resistance when the PDMS surface has been modified using APTES treatment as compared to an oxygen plasma treatment. These results were validated at the microscopic and mesoscopic length scales through nano-scratch and nano-indentation measurements. Further, we developed a unique method using modified atomic force microscopy to measure the adhesive energy between treated PDMS surfaces and SF molecules. These measurements indicated that the adhesive strength of PDMS-APTES-SF is 10 times more compared to PDMS-O2-SF due to the higher number of molecular linkages formed in this nanoscale contact. This lower number of molecular linkages in the PDMS-O2 indicates that only fewer numbers of surface hydroxyl groups interact with the SF protein through secondary interactions such as hydrogen bonding. On the other hand, a larger number of amine groups present on PDMS-APTES surface hydrogen bond with the polar amino acids present on the silk fibroin protein chain, resulting in better adhesion. Thus, APTES modification to the PDMS substrate results in improved adhesion of nano-coating to the substrate and enhances the delamination and crack resistance of the nano-coatings.
Significantly improved cell affinity of polydimethylsiloxane enabled by a surface-modified strategy with chemical coupling

Li Rao,Yuqin Liu,Haihan Zhou

DOI: https://doi.org/10.1007/s10856-022-06690-3

2022-09-24

Abstract:Polydimethylsiloxane (PDMS) is a commonly used insulation/packaging material for implantable neural electrodes. Nevertheless, the PDMS-initiated tissue response would lead to the deterioration of the electrode performances post-implantation, owing to its intrinsic hydrophobic and cell-repellent surface. The conventional physical coatings by hydrophilic hydrogels or bioactive molecules are unable to maintain during the long-term implantation due to their low stability by physical adhesion. In this work, we first anchor both hydrophilic polyethylene glycol (PEG) and bioactive molecule poly-L-lysine (PLL) on the PDMS surface by chemical coupling to change the PDMS surface from hydrophobic and cell-repellent to hydrophilic and cell-adhesive. XPS tests indicate the chemically coupled modification layers are stable on the PDMS surface after experiencing a harsh rinse process. Contact angle measurements show that the use of PEG 600 with the moderate molecular weight results in the highest hydrophilicity for the resulting PDMS-PEG-PLL. PC12 cell evaluation results exhibit that the PDMS-PEG-PLL with PEG 600 leads to significantly larger cell adhesion area, more neurite number, and longer neurite length than the PDMS. The PDMS-PEG-PLL with PEG 600 featuring stable modification layers, high hydrophilicity, and superior cell affinity has great potential in stabilizing the neural electrode-tissue interface for the long-term implantation.

engineering, biomedical,materials science, biomaterials
A durable and biocompatible ascorbic acid-based covalent coating method of polydimethylsiloxane for dynamic cell culture

Joni Leivo,Sanni Virjula,Sari Vanhatupa,Kimmo Kartasalo,Joose Kreutzer,Susanna Miettinen,Pasi Kallio

DOI: https://doi.org/10.1098/rsif.2017.0318

IF: 4.293

2017-07-01

Journal of The Royal Society Interface

Abstract:Polydimethylsiloxane (PDMS) is widely used in dynamic biological microfluidic applications. As a highly hydrophobic material, native PDMS does not support cell attachment and culture, especially in dynamic conditions. Previous covalent coating methods use glutaraldehyde (GA) which, however, is cytotoxic. This paper introduces a novel and simple method for binding collagen type I covalently on PDMS using ascorbic acid (AA) as a cross-linker instead of GA. We compare the novel method against physisorption and GA cross-linker-based methods. The coatings are characterized by immunostaining, contact angle measurement, atomic force microscopy and infrared spectroscopy, and evaluated in static and stretched human adipose stem cell (hASC) cultures up to 13 days. We found that AA can replace GA as a cross-linker in the covalent coating method and that the coating is durable after sonication and after 6 days of stretching. Furthermore, we show that hASCs attach and proliferate better on AA cross-linked samples compared with physisorbed or GA-based methods. Thus, in this paper, we provide a new PDMS coating method for studying cells, such as hASCs, in static and dynamic conditions. The proposed method is an important step in the development of PDMS-based devices in cell and tissue engineering applications.

multidisciplinary sciences
Covalently Attached Slippery Surface Coatings to Reduce Protein Adsorptions on Poly(dimethylsiloxane) Planar Surfaces and 3D Microfluidic Channels

Yue Cao,Xingchi Chen,Avi Matarasso,Zizheng Wang,Yang Song,Guangfu Wu,Xincheng Zhang,He Sun,Xueju Wang,Yan Li,Yi Zhang,Michael R Bruchas

DOI: https://doi.org/10.1021/acsami.2c20834

IF: 9.5

2023-02-11

ACS Applied Materials & Interfaces

Abstract:Silicone elastomers, such as poly(dimethylsiloxane) (PDMS), have a broad range of applications in basic biomedical research and clinical medicine, ranging from the preparation of microfluidic devices for organs-on-chips and ventriculoperitoneal shunts for the treatment of hydrocephalus to implantable neural probes for neuropharmacology. Despite the importance, the protein adsorptions on silicone elastomers in these application environments represent a significant challenge. Surface coatings with...

materials science, multidisciplinary,nanoscience & nanotechnology
Tailoring Cell Attachment onto Melt Electrowritten Scaffolds via a Phase Separated Hydrogel Coating with Peptide Functionalization

Kelly L. O'Neill,Amanda Kurtz,Ievgenii Liashenko,Guilherme Rocha,Naomi C. Paxton,Paul D. Dalton

DOI: https://doi.org/10.1002/admi.202400692

IF: 5.4

2024-11-13

Advanced Materials Interfaces

Abstract:A fast and flexible hydrogel coating process is demonstrated that applies to high resolution 3D printed materials. Using a phase‐separated system, drops of monomer/polymer are entrapped onto PCL fibers and functionalized with cell‐adhesive peptides. The modified material shows improved cell attachment, demonstrating the viability of a simple coating approach of scaffolds for biomedical and related applications. Highly porous scaffolds with a high surface area can be designed and fabricated via melt electrowriting (MEW). Here, the study introduces morphological features onto the MEW microfibers via a hydrogel coating of phase‐separated poly(2‐hydroxyethyl methacrylate) (pHEMA). This coating is achieved by capturing phase‐separated droplets of pHEMA onto poly(ε‐caprolactone) (PCL) microfibers via dip‐coating, resulting in a hydrogel coating with webbed structures across pores of the MEW scaffold. Excess pHEMA droplets are removed and phase separation is quenched by washing in water, and then functionalized by dipping the pHEMA coated scaffold into a buffered peptide solution. It is demonstrated that a cysteine‐terminated peptide sequence (Cys‐Gly‐Arg‐Gly‐Asp‐Ser‐Gly (CG‐RGD‐SG)) promotes fibroblast adhesion on the hydrogel‐coated MEW scaffolds compared to unmodified pHEMA and compared to scrambled peptide sequence. Due to the protein‐resistant nature of pHEMA, the hydrogel‐coated scaffolds show less cell attachment than non‐coated PCL scaffolds, while RGD‐functionalized pHEMA scaffolds achieve 2.8‐fold increase in cell attachment (p = 0.02) when compared to non‐functionalized pHEMA. The study therefore presents a platform that combines PCL scaffolds of microscale fibers with a phase‐separated pHEMA hydrogel coating that maintains the high porosity of MEW scaffolds yet increases surface area and, importantly, introduces the capability for tailoring cell attachment via peptide functionalization.

materials science, multidisciplinary,chemistry
In Situ Immobilization of Proteins and Rgd Peptide on Polyurethane Surfaces Via Poly(Ethylene Oxide) Coupling Polymers for Human Endothelial Cell Growth

DA Wang,J Ji,YH Sun,JC Shen,LX Feng,JH Elisseeff

DOI: https://doi.org/10.1021/bm0255950

2002-01-01

Biomacromolecules

Abstract:A "CBABC"-type pentablock coupling polymer, mesylMPEO, was designed and synthesized to promote human endothelial cell growth on the surfaces of polyurethane biomaterials. The polymer was composed of a central 4,4'-methylenediphenyl diisocyanate (MDI) coupling unit and poly(ethylene oxide) (PEO) spacer arms with methanesulfonyl (mesyl) end groups pendent on both ends. As the presurface modifying additive (pre-SMA), the mesylMPEO was noncovalently introduced onto the poly(ether urethane) (PEU) surfaces by dip coating, upon which the protein/peptide factors (gelatin, albumin, and arginine-glycine-aspartic acid tripeptide [RGD]) were covalently immobilized in situ by cleavage of the original mesyl end groups. The pre-SMA synthesis and PEU surface modification were characterized using nuclear magnetic resonance spectroscopy (H-1 NMR), attenuated total reflection infrared spectroscopy (ATR-FTIR), and X-ray photoelectron spectroscopy (XPS). Human umbilical vein endothelial cells (HUVEC) were harvested manually by collagenase digestion and seeded on the modified PEU surfaces. Cell adhesion ratios (CAR) and cell proliferation ratios (CPR) were measured using flow cytometry, and the individual cell viability (ICV) was determined by MTT assay. The cell morphologies were investigated by optical inverted microscopy (OIM) and scanning electrical microscopy (SEM). The gelatin- and RGD-modified surfaces were HUVEC-compatible and promoted HUVEC growth. The albumin-modified surfaces were compatible but inhibited cell adhesion. The results also indicated that, for HUVEC in vitro cultivation, the cell adhesion stage was of particular importance and had a significant impact on the cell responses to the modified surfaces.
PDMS nanoparticles-decorated PDMS substrate promotes adhesion, proliferation and differentiation of skin cells

Auhin Kumar Maparu,Prerana Singh,Beena Rai,Ashutosh Sharma,Sri Sivakumar

DOI: https://doi.org/10.1016/j.jcis.2023.12.155

IF: 9.9

2024-01-11

Journal of Colloid and Interface Science

Abstract:Polydimethylsiloxane (PDMS) is known to be a common substrate for various cell culture-based applications. However, native PDMS is not very conducive for cell culture and hence, surface modification via cell adhesion moieties is generally needed to make it suitable especially for long-term cell culture. To address this issue, we propose to coat PDMS nanoparticles (NPs) on the surface of PDMS film to improve adhesion, proliferation and differentiation of skin cells. The proposed modification strategy introduces necessary nanotopography without altering the surface chemical properties of PDMS. Due to resemblance in the mechanical properties of PDMS with skin, PDMS NPs can recreate the native extracellular nanoenvironment of skin on the PDMS surface and provide anchoring sites for skin cells to adhere and grow. Human keratinocytes, representing 95% of the epidermal skin cells maintained their characteristic well-spread morphology with the formation of interconnected cell-sheets on this coated PDMS surface. Moreover, our in vitro immunofluorescence studies confirmed expression of distinctive epidermal protein markers on the coated surface indicating close resemblance with the native skin epidermis. Conclusively, our findings suggest that introducing nanotopography via PDMS NPs can be an effective strategy for emulating the native cellular functions of keratinocytes on PDMS based cell culture devices.

chemistry, physical
Surface Coating with Hyaluronic Acid-Gelatin-Crosslinked Hydrogel on Gelatin-Conjugated Poly(dimethylsiloxane) for Implantable Medical Device-Induced Fibrosis

Haejin Joo,Jonghyun Park,Chanutchamon Sutthiwanjampa,Hankoo Kim,Taehui Bae,Wooseob Kim,Jinhwa Choi,Mikyung Kim,Shinhyuk Kang,Hansoo Park

DOI: https://doi.org/10.3390/pharmaceutics13020269

IF: 6.525

2021-02-17

Pharmaceutics

Abstract:Polydimethylsiloxane (PDMS) is a biocompatible polymer that has been applied in many fields. However, the surface hydrophobicity of PDMS can limit successful implementation, and this must be reduced by surface modification to improve biocompatibility. In this study, we modified the PDMS surface with a hydrogel and investigated the effect of this on hydrophilicity, bacterial adhesion, cell viability, immune response, and biocompatibility of PDMS. Hydrogels were created from hyaluronic acid and gelatin using a Schiff-base reaction. The PDMS surface and hydrogel were characterized using nuclear magnetic resonance, X-ray photoelectron spectroscopy, attenuated total reflection Fourier-transform infrared spectroscopy, and scanning electron microscopy. The hydrophilicity of the surface was confirmed via a decrease in the water contact angle. Bacterial anti-adhesion was demonstrated for Pseudomonas aeruginosa, Ralstonia pickettii, and Staphylococcus epidermidis, and viability and improved distribution of human-derived adipose stem cells were also confirmed. Decreased capsular tissue responses were observed in vivo with looser collagen distribution and reduced cytokine expression on the hydrogel-coated surface. Hydrogel coating on treated PDMS is a promising method to improve the surface hydrophilicity and biocompatibility for surface modification of biomedical applications.

pharmacology & pharmacy
Improving Hydrophilicity and Adhesion of PDMS through Dopamine Modification Assisted by Carbon Dioxide Plasma

Mingyue Lu,Li Ding,Tianci Zhong,Zhendong Dai

DOI: https://doi.org/10.3390/coatings13010126

IF: 3.236

2023-01-11

Coatings

Abstract:In this paper, the carbon dioxide (CO2) plasma-assisted method was firstly developed for the preparation of dopamine coating polydimethylsiloxane (PDMS). The PDMS films were pre-treated by CO2 plasma at the power of 30–60 W for 5–10 min and then modified by dopamine for 18 h. The results showed that many polar groups such as C-O bonds, C=O bonds, and O-C=O bonds were introduced into the surface of PDMS films, which successfully promoted the formation of poly(dopamine) coating. Finally, the results of contact angle measurements showed that the surface of the plasma-assisted dopamine grafted samples changed from 118° to 64°. The shearing adhesion strength increased from 2.22 N/cm2 to 6.02 N/cm2, almost three times that of the original sample. This method provides a successful strategy for obtaining good poly(dopamine) coating layers on PDMS with strong hydrophilicity and shearing adhesion, which can be widely applied in the fields of medical and adhesive materials.

materials science, multidisciplinary,physics, applied, coatings & films
Enhanced In Vitro Biocompatibility of Chemically Modified Poly(dimethylsiloxane) Surfaces for Stable Adhesion and Long-term Investigation of Brain Cerebral Cortex Cells

Shreyas Kuddannaya,Jingnan Bao,Yilei Zhang

DOI: https://doi.org/10.1021/acsami.5b09032

2015-11-18

Abstract:Studies on the mammalian brain cerebral cortex have gained increasing importance due to the relevance of the region in controlling critical higher brain functions. Interactions between the cortical cells and surface extracellular matrix (ECM) proteins play a pivotal role in promoting stable cell adhesion, growth, and function. Poly(dimethylsiloxane) (PDMS) based platforms have been increasingly used for on-chip in vitro cellular system analysis. However, the inherent hydrophobicity of the PDMS surface has been unfavorable for any long-term cell system investigations due to transitory physical adsorption of ECM proteins on PDMS surfaces followed by eventual cell dislodgement due to poor anchorage and viability. To address this critical issue, we employed the (3-aminopropyl)triethoxysilane (APTES) based cross-linking strategy to stabilize ECM protein immobilization on PDMS. The efficiency of surface modification in supporting adhesion and long-term viability of neuronal and glial cells was analyzed. The chemically modified surfaces showed a relatively higher cell survival with an increased neurite length and neurite branching. These changes were understood in terms of an increase in surface hydrophilicity, protein stability, and cell-ECM protein interactions. The modification strategy could be successfully applied for stable cortical cell culture on the PDMS microchip for up to 3 weeks in vitro.
Solution-phase Surface Modification in Intact Poly(dimethylsiloxane) Microfluidic Channels.

Guodong Sui,Jinyi Wang,Chung-Cheng Lee,Weixing Lu,Stephanie P Lee,Jeffrey V Leyton,Anna M Wu,Hsian-Rong Tseng

DOI: https://doi.org/10.1021/ac060605z

IF: 7.4

2006-01-01

Analytical Chemistry

Abstract:An improved approach composed of an oxidation reaction in acidic H2O2 solution and a sequential silanization reaction using neat silane reagents for surface modification of poly(dimethylsiloxane) (PDMS) substrates was developed. This solution-phase approach is simple and convenient for some routine analytical applications in chemistry and biology laboratories and is designed for intact PDMS-based microfluidic devices, with no device postassembly required. Using this improved approach, two different functional groups, poly(ethylene glycol) (PEG) and amine (NH2), were introduced onto PDMS surfaces for passivation of nonspecific protein absorption and attachment of biomolecules, respectively. X-ray electron spectroscopy and temporal contact angle experiments were employed to monitor functional group transformation and dynamic characteristics of the PEG-grafted PDMS substrates; fluorescent protein solutions were introduced into the PEG-grafted PDMS microchannels to test their protein repelling characteristics. These analytical data indicate that the PEG-grafted PDMS surfaces exhibit improved short-term surface dynamics and robust long-term stability. The amino-grafted PDMS microchannels are also relatively stable and can be further activated for modifications with peptide, DNA, and protein on the surfaces of microfluidic channels. The resulting biomolecule-grafted PDMS microchannels can be utilized for cell immobilization and incubation, semiquantitative DNA hybridization, and immunoassay.
Designing mamdani type fuzzy rule using a collaborative FCM scheme

Chin-Teng Lin,M. Prasad,Jyh-Yeong Chang

DOI: https://doi.org/10.1109/IFUZZY.2013.6825450

2013-12-01

Abstract:This paper presents a new approach for generating fuzzy rules for fuzzy inference system by using collaborative fuzzy c-mean (CFCM). In order to do any mode of integration between datasets, there is a need to define the common feature between datasets by using some kind of collaborative process and also need to preserve the privacy and security at higher levels. This collaboration process gives a common structure between datasets which helps to define an appropriate number of rules for structural learning and also improve the accuracy of the system modeling. This all consideration bring the concept of collaborative fuzzy rule generation process with a quality measuring.
A low-fouling, self-assembled, graft co-polymer and covalent surface coating for controlled immobilization of biologically active moieties

Anne-Sophie Mertgen,Anne Géraldine Guex,Samuele Tosatti,Giuseppino Fortunato,René M. Rossi,Markus Rottmar,Katharina Maniura-Weber,Stefan Zürcher

DOI: https://doi.org/10.1016/j.apsusc.2022.152525

IF: 6.7

2022-05-01

Applied Surface Science

Abstract:Current biointerfaces aiming to steer specific biological responses frequently lack either stability due to purely electrostatic interactions, bioactivity due to unspecific conjugation chemistries, specificity due to uncontrolled biological interactions such as fouling, or cytocompatibility due to harsh and toxic coating procedures. Here, we report a versatile surface modification platform for covalent tethering of selected biomolecules. New in this approach is the particular combination of modular binding blocks as graft co-polymer. Grafted to the backbone of PAcrAmTM multiple functionalities are strategically combined: covalent (silane) and non-covalent (lysine) surface binding groups for stability and self-assembly in mild buffered solution, PEG-azide chains for low fouling properties, and specific, controlled, covalent, linking of biologically active molecules. This modular strategy overcomes the previously mentioned limitations, for instance regarding bioactivity of the biological moiety due to highly specific strain-promoted azide-alkyne cycloaddition. The successful grafting of the copolymer was confirmed by 1H NMR. The immobilization of RGD peptides was characterized by combining surface analytical techniques, such as ToF-SIMS and ellipsometry, allowing quantification of immobilized molecules over an extensive range of concentrations (0.008–1.95 pmol·cm−2). The bioactivity over this range of concentrations was confirmed by in vitro cell studies, presenting a differential endothelial cell attachment and spreading. The modified substrates enabled the formation of an interconnected monolayer of endothelial cells. Furthermore, the modular platform allowed the co-immobilization of two bioactive functional groups, RGD and biotin, on the same surface, which could be exploited for the further development of controlled multi-functional biointerfaces for diverse biological applications in the future.

chemistry, physical,physics, applied, condensed matter,materials science, coatings & films
Plasma activated PDMS microstructured pattern with collagen for improved myoblast cell guidance

Nikola Slepickova Kasalkovova,Veronika Juricova,Dominik Fajstavr,Bara Frydlova,Silvie Rimpelova,Vaclav Svorcik,Petr Slepicka

2024-02-26

Abstract:We focused on polydimethylsiloxane (PDMS) as a substrate for replication, micropatterning, and construction of biologically active surfaces. The novelty of this study is based on the combina-tion of argon plasma exposure of micropatterned PDMS scaffold, where the plasma served as a strong tool for subsequent grafting of collagen coating and their application as cell growth scaf-folds, where the standard has been significantly exceeded. As part of scaffold design, templates with a patterned microstructure of different dimensions (50 x 50, 50 x 20 and 30 x 30 microns were created by photolithography followed by pattern replication on a PDMS polymer substrate. Subsequently, the prepared microstructured PDMS replicas were coated with a type I collagen layer. The sample preparation was followed by the characterization of material surface properties through various analytical techniques, including scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and X-ray photoelectron spectroscopy (XPS). To evaluate the biocompatibility of the produced samples, we conducted studies on the interactions between selected polymer replicas with micro- and nanostructures and mammalian cells. Specif-ically, we utilized mouse myoblasts (C2C12) and our results demonstrate that we achieved excellent cell alignment in conjunction with the development of a cytocompatible surface. Consequently, the outcomes of this research contribute to an enhanced comprehension of surface properties and interactions between structured polymers and mammalian cells. The use of periodic microstructures holds the potential for advancing the creation of novel materials and scaffolds in tissue engineering. These materials exhibit exceptional biocompatibility and possess the capacity to promote cell adhesion and growth.

Medical Physics,Materials Science
[Myographic analysis after unilateral extirpation of the anterior cerebellar lobe (astrocytoma)].

J. Gerlach,H. Hufschmidt

Deutsche Zeitschrift für Nervenheilkunde

Abstract:

Urinary diversion to the augmented and valved rectum: preliminary results with a novel surgical procedure.

Chemical Modification on Top of Nanotopography to Enhance Surface Properties of PDMS

RGD Peptide-Conjugated Poly(dimethylsiloxane) Promotes Adhesion, Proliferation, and Collagen Secretion of Human Fibroblasts.

Surface Modification of PDMS-Based Microfluidic Devices with Collagen Using Polydopamine as a Spacer to Enhance Primary Human Bronchial Epithelial Cell Adhesion

Polydopamine-collagen complex to enhance the biocompatibility of polydimethylsiloxane substrates for sustaining long-term culture of L929 fibroblasts and tendon stem cells

Motor city blues.

Mechanism of Adhesion of Natural Polymer Coatings to Chemically Modified Siloxane Polymer

Significantly improved cell affinity of polydimethylsiloxane enabled by a surface-modified strategy with chemical coupling

A durable and biocompatible ascorbic acid-based covalent coating method of polydimethylsiloxane for dynamic cell culture

Covalently Attached Slippery Surface Coatings to Reduce Protein Adsorptions on Poly(dimethylsiloxane) Planar Surfaces and 3D Microfluidic Channels

Tailoring Cell Attachment onto Melt Electrowritten Scaffolds via a Phase Separated Hydrogel Coating with Peptide Functionalization

In Situ Immobilization of Proteins and Rgd Peptide on Polyurethane Surfaces Via Poly(Ethylene Oxide) Coupling Polymers for Human Endothelial Cell Growth

PDMS nanoparticles-decorated PDMS substrate promotes adhesion, proliferation and differentiation of skin cells

Surface Coating with Hyaluronic Acid-Gelatin-Crosslinked Hydrogel on Gelatin-Conjugated Poly(dimethylsiloxane) for Implantable Medical Device-Induced Fibrosis

Improving Hydrophilicity and Adhesion of PDMS through Dopamine Modification Assisted by Carbon Dioxide Plasma

Enhanced In Vitro Biocompatibility of Chemically Modified Poly(dimethylsiloxane) Surfaces for Stable Adhesion and Long-term Investigation of Brain Cerebral Cortex Cells

Solution-phase Surface Modification in Intact Poly(dimethylsiloxane) Microfluidic Channels.

Designing mamdani type fuzzy rule using a collaborative FCM scheme

A low-fouling, self-assembled, graft co-polymer and covalent surface coating for controlled immobilization of biologically active moieties

Plasma activated PDMS microstructured pattern with collagen for improved myoblast cell guidance

[Myographic analysis after unilateral extirpation of the anterior cerebellar lobe (astrocytoma)].