Study of temperature variation of walnut shell and solid heat carrier and their effect on primary pyrolysis and volatiles reaction

Shumiao Quan,Lei Shi,Bin Zhou,Zhenyu Liu,Qingya Liu
DOI: https://doi.org/10.1016/j.fuel.2021.120290
IF: 7.4
2021-05-01
Fuel
Abstract:<p>Biomass pyrolysis by solid heat carrier is regarded to be efficient in heat transfer, high in tar yield and easier for reactor scale-up. However the transient behaviors in heat and mass transfer and complicate reactions, especially the volatiles reaction in the solid heat carrier phase, make it difficult to understand the relations between operating conditions and the conditions of actual reactions, and consequently the yield and composition of the products. This work studies these relations using a 4 mm layer of walnut shell as the biomass and some amounts of quartz sand as the solid heat carrier in a specially designed small reactor to simulate a finite element in a moving bed large reactor. The mean temperature of the walnut shell layer (<span class="math"><math>T-</math></span><sub>WS</sub>) and the highest temperature of the quartz sand layer (<span class="math"><math>T-</math></span><sub>QS-o</sub>) under various quartz sand preheating temperatures (<em>PT</em>, 600–900 °C) and various solid heat carrier-to-biomass mass ratios (<em>R</em><sub>s-b</sub>, 5:1–9:1) are determined and correlated with the walnut shell pyrolysis and volatiles reaction. The results show that <span class="math"><math>T-</math></span><sub>QS-o</sub> and <span class="math"><math>T-</math></span><sub>WS</sub> depend linearly on <em>PT</em> and <em>R</em><sub>s-b</sub>, but their difference varies from 39 to 108 °C. A reaction matrix is proposed and the oil yield is modeled by first order kinetics which decouples the roles of <span class="math"><math>T-</math></span><sub>WS</sub> in WS pyrolysis and <span class="math"><math>T-</math></span><sub>QS-o</sub> in oil reaction. It is found that the walnut shell pyrolysis is strongly influenced by heat transfer from quartz sand to walnut shell with activation energy of only 46.4 or 19.2 kJ/mol for varying <em>PT</em> or <em>R</em><sub>s-b</sub>, respectively. The oil reaction in the quartz sand layer reduces the oil yield and is dominated by the reaction of radical fragments that is weakly dependent on temperature, so the activation energy is also low, 4.8 or 2.9 kJ/mol for varying <em>PT</em> or <em>R</em><sub>s-b</sub>, respectively. The oil reaction in the quartz sand is extensive and more than 50% of it is converted to non-oil volatiles at <span class="math"><math>T-</math></span><sub>WS</sub> of 350 °C.</p>
energy & fuels,engineering, chemical
What problem does this paper attempt to address?