Abstract:Surface defects are introduced on LLZTO (OV‐LLZTO) solid electrolyte to serve as anchoring points for oxygen atoms of poly(ethylene oxide) chains. The interfacial‐anchoring effect induces a firmly bonded polymer‐ceramic interface, forming a homogeneous composite electrolyte with high mechanical strength, improved Li+ conductivity and reduced interfacial resistance with electrodes. The favorable properties contribute to a high‐rate flexible solid–state batteries. High Li+ conductivity, good interfacial compatibility and high mechanical strength are desirable for practical utilization of all‐solid‐state electrolytes. In this study, by introducing Li6.4La3Zr1.4Ta0.6O12 (LLZTO) with surface defects into poly(ethylene oxide) (PEO), a composite solid electrolyte (OV‐LLZTO/PEO) is prepared. The surface defects serve as anchoring points for oxygen atoms of PEO chains, forming a firmly bonded polymer‐ceramic interface. This bonding effect effectively prevents the agglomeration of LLZTO particles and crystallization of PEO domains, forming a homogeneous electrolyte membrane exhibiting high mechanical strength, reduced interfacial resistance with electrodes as well as improved Li+ conductivity. Owing to these favorable properties, OV‐LLZTO/PEO can be operated under a high current density (0.7 mA cm−2) in a Li–Li symmetric cell without short circuit. Above all, solid‐state full‐cells employing OV‐LLZTO/PEO deliver state‐of‐the‐art rate capability (8 C), power density and capacity retention. As a final proof of concept study, flexible pouch cells are assembled and tested, exhibiting high cycle stability under 5 C and excellent safety feature under abusive working conditions. Through manipulating the interfacial interactions between polymer and inorganic electrolytes, this study points out a new direction to optimizing the performance of all‐solid‐state batteries.

Interfacial engineering facilitating robust Li 6.35 Ga 0.15 La 3 Zr 1.8 Nb 0.2 O 12 for all-solid-state lithium batteries

Interface Functionalization of Composite Electrolyte by Lix-CeO2 Layer on the Surface of Li6.4La3Zr1.4Ta0.6O12

Enhancing interfacial stability in solid-state lithium batteries with polymer/garnet solid electrolyte and composite cathode framework

Facile Interfacial Modification Via In-Situ Ultraviolet Solidified Gel Polymer Electrolyte for High-Performance Solid-State Lithium Ion Batteries

Strippable and flexible solid electrolyte membrane by coupling Li6.4La3Zr1.4Ta0.6O12 and insulating polyvinylidene fluoride for solid state lithium ion battery

Ameliorating the interfacial issues of all-solid-state lithium metal batteries by constructing polymer/inorganic composite electrolyte

High-Performance Solid-State Lithium Metal Batteries of Garnet/Polymer Composite Thin-Film Electrolyte with Domain-Limited Ion Transport Pathways.

Across Interfacial Li + Conduction Accelerated by a Single-Ion Conducting Polymer in Ceramic-Rich Composite Electrolytes for Solid-State Batteries

An agglomeration-free and high ion conductive ceramic-in-polymer composite solid electrolyte modified by fluorocarbon surfactant for enhancing performance of all-solid-state lithium batteries

Interfacial compatibility design of high-performance electrolytes for SiCO-based all-solid-state lithium battery

In situ polymerization of 1,3-dioxolane infiltrating 3D garnet framework with high ionic conductivity and excellent interfacial stability for integrated solid-state Li metal battery

Regulating Interfacial Li‐Ion Transport via an Integrated Corrugated 3D Skeleton in Solid Composite Electrolyte for All‐Solid‐State Lithium Metal Batteries

Surface Defects Reinforced Polymer‐Ceramic Interfacial Anchoring for High‐Rate Flexible Solid‐State Batteries

Synergistically enabling the interface stability of lithium metal batteries with soft ionic gel and garnet-type Li6.4La3Zr1.4Ta0.6O12 ceramic filler

Hybridizing poly(vinylidene fluoride-co-hexafluoropropylene) with Li6.5La3Zr1.5Ta0.5O12 as a lithium-ion electrolyte for solid state lithium metal batteries

Improving cathode/Li6.4La3Zr1.4Ta0.6O12 electrolyte interface with a hybrid PVDF-HFP-based buffer layer for solid lithium battery

Surface modification strategies for an improved interfacial compatibility between LLZO and a polymer substrate for applications in high-performance solid-state Li-metal batteries

Improving Bulk and Interfacial Lithium Transport in Garnet-Type Solid Electrolytes through Microstructure Optimization for High-Performance All-Solid-State Batteries

Synergistic Coupling Between Li6.75La3Zr1.75Ta0.25O12 and Poly(vinylidene Fluoride) Induces High Ionic Conductivity, Mechanical Strength, and Thermal Stability of Solid Composite Electrolytes

Enhancing Interfacial Contact in Solid‐State Batteries with a Gradient Composite Solid Electrolyte

Smart construction of multifunctional Li1.5Al0.5Ge1.5(PO4)3|Li intermediate interfaces for solid-state batteries