Abstract:In this paper, we introduce a neural learning-based approach to blind source separation for detection of material flaws in pulsed thermography (PT) images. This approach can be used to detect internal defects (pores) in metallic Additively Manufactured (AM) materials. Such defects occur in high-strength alloys produced with direct laser sintering AM method for nuclear energy applications. Pulsed thermal imaging system utilizes a high intensity flash lamp to rapidly heat surface of sample, a high sensitivity infrared camera to capture data of surface temperature variations. The data cube obtained with PT (stack of surface temperature images at different times) can be analyzed with image processing algorithms to detect material defects. Compared with conventional nondestructive evaluation (NDE) methods, such as digital radiography and ultrasonic testing, the PT pulsed infrared thermal detection technique has advantages of one-sided noncontact measurements, fast processing of large sample areas captured in one image. Detection of small material defects requires finding features in thermal images, which have signal contrast levels approaching sensitivity limit of IR camera. In this study, an optimized Neural Learning based Blind Source Separation (NLBSS) algorithm, including Principal Component Analysis (PCA), and Independent Component Analysis (ICA) is demonstrated to automatically extract principal temporal and spatial features of thermography frames to enhance flaw detection. By using the NLBSS algorithm, material internal defects can be automatically detected. Furthermore, this processing approach compensates for experimental thermal imaging artifacts, such as noise and uneven heating. By merging artificial intelligence with the photothermic, the NDE system detects internal calibrated defects of various sizes and depths in AM nuclear-grade metallic alloys.

Spatial and temporal deep learning for defect detection with lock-in thermography

Spatio-Temporal 3-D Residual Networks for Simultaneous Detection and Depth Estimation of CFRP Subsurface Defects in Lock-In Thermography

Two-stream Convolutional Neural Network for Non-Destructive Subsurface Defect Detection Via Similarity Comparison of Lock-in Thermography Signals

Temporal and Spatial Deep Learning Network for Infrared Thermal Defect Detection

Research on the Quantitative Analysis of Subsurface Defects for Non-Destructive Testing by Lock-In Thermography

Lock-in Thermography for Evaluation of Destruction Area and Determination of Depth

Two-stage Convolutional Neural Network for Joint Removal of Sensor Noise and Background Interference in Lock-in Thermography

Processing thermal image sequences for defect detection based on ultrasound lock-in thermography

Research on Lock-in Thermography for Aerospace Materials of Nondestructive Test Based on Image Sequence Processing

Quantitative Detection of Defect Using Ultrasound Infrared Lock-In Thermography

Multiview Learning for Subsurface Defect Detection in Composite Products: A Challenge on Thermographic Data Analysis

Asynchronous Lock In Thermography of 3D Printed PLA and ABS samples

Advanced 3D Localization in Lock-in Thermography Based on the Analysis of the TRTR (Time-Resolved Thermal Response) Received Upon Arbitrary Waveform Stimulation

Three-Dimensional Visualization of Subsurface Defect Using Lock-In Thermography

Hierarchical Low-Rank and Sparse Tensor Micro Defects Decomposition by Electromagnetic Thermography Imaging System

Automatic Detection of CFRP Subsurface Defects via Thermal Signals in Long Pulse and Lock-In Thermography

The fusion of lock-in phase images for the damage investigation in composites materials

Spatial and Temporal Deep Learning in Air-Coupled Ultrasonic Testing for Enabling NDE 4.0

Neural Learning Based Blind Source Separation for Detection of Material Defects in Pulsed Thermography Images

Synthetic data generation using finite element method to pre-train an image segmentation model for defect detection using infrared thermography

Research on CFRP Materials Nondestructive Testing by IR Lock-in Thermography