Abstract:Utilising cooling stimulation as a thermal excitation means has demonstrated profound capabilities of detecting sub-surface metal loss using thermography. Previously, a prototype mechanism was introduced which accommodates a thermal camera and cooling source and operates in a reciprocating motion scanning the test piece while cold stimulation is in operation. Immediately after that, the camera registers the thermal evolution. However, thermal reflections, non-uniform stimulation and lateral heat diffusions will remain as undesirable phenomena preventing the effective observation of sub-surface defects. This becomes more challenging when there is no prior knowledge of the non-defective area in order to effectively distinguish between defective and non-defective areas. In this work, the previously automated acquisition and processing pipeline is re-designed and optimised for two purposes: 1-Through the previous work, the mentioned pipeline was used to analyse a specific area of the test piece surface in order to reconstruct the reference area and identify defects. In order to expand the application of this device over the entire test area, regardless of its extension, the pipeline is improved in which the final surface image is reconstructed by taking into account multiple segments of the test surface. The previously introduced pre-processing method of Dynamic Reference Reconstruction (DRR) is enhanced by using a more rigorous thresholding procedure. Principal Component Analysis (PCA) is then used in order for feature (DRR images) reduction. 2-The results of PCA on multiple segment images of the test surface revealed different ranges of intensities across each segment image. This potentially could cause mistaken interpretation of the defective and non-defective areas. An automated segmentation method based on Gaussian Mixture Model (GMM) is used to assist the expert user in more effective detection of the defective areas when the non-defective areas are uniformly characterised as background. The final results of GMM have shown not only the capability of accurately detecting subsurface metal loss as low as 37.5% but also the successful detection of defects that were either unidentifiable or invisible in either the original thermal images or their PCA transformed results.

Continuous laser-line scanning thermography with data-processing algorithm for rapid and accurate defect inspection

Detection of Defects in Optics Based on Scanning

Line Scanning Thermography Reconstruction Algorithm for Defects Inspection with Novel Velocity Estimation and Image Registration

Quantitative Detection of Surface Defect Using Laser-Generated Rayleigh Wave with Broadband Local Wavenumber Estimation

A Novel 3D Evaluation Method for Surface Defects Using Broadband Laser-Generated Rayleigh Waves with Wavenumber Analysis.

A high-resolution detecting system based on machine vision for defects on large aperture and super-smooth surface

Detecting features of defect metal based on laser ultrasonic technique

Use of line laser scanning thermography for the defect detection and evaluation of composite material

Defect Detection Method for CFRP Based on Line Laser Thermography

Spatio-Temporal 3-D Residual Networks for Simultaneous Detection and Depth Estimation of CFRP Subsurface Defects in Lock-In Thermography

Thermography Sequence Processing and Defect Edge Identification of TBC Structure Debonding Defects Detection Using Long-Pulsed Infrared Wave Non-Destructive Testing Technology

Width and Depth Gauging of Rectangular Subsurface Defects Based on All-Optical Laser-Ultrasonic Technology

Multiphysics Structured Eddy Current and Thermography Defects Diagnostics System in Moving Mode.

Automatic Extraction of Material Defect Size by Infrared Image Sequence

An Automated Pipeline for Dynamic Detection of Sub-Surface Metal Loss Defects across Cold Thermography Images

Characterization and depth detection of internal delamination defects in CFRP based on line laser scanning infrared thermography

Nondestructive Surface Crack Detection of Laser-Repaired Components by Laser Scanning Thermography

Gapped Smoothing Algorithm Applied to Defect Identification Using Pulsed Thermography

Real Aperture Continuous Terahertz Imaging System and Spectral Refinement Method

Depth extraction of 3D defects on curved surfaces with multi-line lasers

Linear laser fast scanning thermography NDT for artificial disbond defects in thermal barrier coatings.