Abstract:In order to get a deep understanding of biomass pyrolysis and gasification with particle size ranging from several millimeters to centimeters, detailed modeling of thermochemical conversion of thermally thick particles is required. In this paper, a new pyrolysis model for a large biomass particle is established, and the porous particle is modeled with two systems. In the continuous system, a uniform multiphase CFD algorithm is implemented to resolve both internal and external flow fields, and the solid temperature is solved by considering heat conduction, heat convection, and radiation. In the discrete system, the large particle is regarded as a porous media and discretized into a cluster of small virtual particles which are used to model the devolatilization and particle shrinkage. The evolutions of porosity and internal specific surface area during pyrolysis are also taken into account. The proposed model is first validated with the experiments in the literature, and good agreements have been obtained. Moreover, the temperature contour, gas species distribution, and streamlines both inside and outside the particle, which cannot be provided by the experiment, are also presented and analyzed. In addition, the effects of particle size, initial porosity, pore structure parameter, inflow velocity, tar generation, devolatilization heat, and particle shape on pyrolysis behavior are also explored. It is found that, increasing initial porosity, specific surface area, inflow velocity, particle length -to -width ratio, and decreasing particle diameter will reduce the intraparticle temperature gradient, which is also greatly influenced by the Stefan flow effect. Tar generation influences the thermophysical properties of the released gas and the interphase convective heat transfer. All the simulation results demonstrate that the current model is capable of capturing the detailed evolution of a large biomass particle during pyrolysis and providing deeper insight into the interaction between the particle and the surrounding gas.

Modeling the pyrolysis of 3D-printed tannin-based composites – A first approach

New Pyrolysis Model for Biomass Particles in a Thermally Thick Regime

Finite element modeling of intraparticle heterogeneous tar conversion during pyrolysis of woody biomass particles

Modelling the Combustion of Thermally Thick Biomass Particles

Numerical Investigation of Biomass Pyrolysis Performance in a Fluidized-Bed Reactor by a TFM-DEM Hybrid Model

Modelling intra-particle phenomena of biomass pyrolysis

Efficient Pyrolysis Model for Large Biomass Particles with Arbitrary Shapes Based on a Composed-Sphere Concept and Voronoi Tessellation

Correlation of the permeability and porosity development of carbon/carbon composites during pyrolysis

Pyrolysis kinetics of tannin–phenol–formaldehyde resin by non-isothermal thermogravimetric analysis

Thermal response and pyrolysis behavior of carbon fiber/phthalonitrile composites under one-sided butane flame heating: Experimental and numerical analysis

Coupled heat transfer–crystallization analysis in continuous carbon fiber-reinforced thermoplastic composites 3D printing: simulation and experimental validation

Pyrolysis behavior of the nanoporous phenolic matrix and the resultant microstructure and property evolution in the composites

Impact of pyrolysis heating methods on biochars with enhanced CO 2 /N 2 separation and their incorporation in 3D-printed composites

Degradation in compressive strength of silica/phenolic composites subjected to thermal and mechanical loading

Pyrolysis Behavior, Pyrolysis Kinetics, Heat Transfer and Pyrolysis Simulation of Almandine/Boron Phenolic Resin Ceramizable Composites

Towards a mechanistic understanding of particle shrinkage during biomass pyrolysis via synchrotron X-ray microtomography and in-situ radiography

Pyrolysis Simulation of Thermally Thick Biomass Particles Based on a Multistep Kinetic Scheme

Development of a pyrolysis model for oriented strand board. Part I: Kinetics and thermodynamics of the thermal decomposition

Modelling and experimental verification of physical and chemical processes during pyrolysis of a large biomass particle

An extended multi-step kinetic model for thermal degradation of ceramizable polymer

Process-dependent Multiscale Modeling for 3D Printing of Continuous Fiber-reinforced Composites