Abstract:Recently, the solar-driven interfacial evaporation desalination has attracted more and more attentions due to the advantages of low cost, zero energy consumption, and high water purification rate, etc. One of the bottlenecks of this emerging technique lies in a lack of simple and low-cost ways to construct three-dimensional (3D) hierarchical microstructures for photothermal membranes. To this end, a two-step strategy is carried out by combining surface functionalization with substrate engineering. Firstly, a silane coupling agent 3-aminopropyltriethoxysilane (APTES) is grafted onto an ideal photothermal material of Ti 3 C 2 T x MXene, to improve the nanochannel sizes and hydrophilicity, which are attributed to enlarged interspaces of MXene and introduced hydrophilic group e.g., –NH 2 and –OH, respectively. Secondly, a low-cost and robust nonwoven fiber (NWF) substrate, which has a 3D micron-sized mesh structure with interlaced fiber stacks, is employed as the skeleton to load enough APTES-grafted MXene by a simple soaking method. Benefited from above design, the Ti 3 C 2 T x -APTES/NWF composite membrane with a 3D hierarchical structure shows enhanced light scattering and utilization, water transport and vapor escape. A remarkable evaporation rate of 1.457 kg m −2 h −1 and an evaporation efficiency of 91.48 % are attained for a large-area (5 × 5 cm 2 ) evaporator, and the evaporation rate is further increased to 1.672 kg m −2 h −1 for a small-area (2 × 2 cm 2 ) device. The rejection rates of salt ions and heavy metal ions are higher than 99 % and 99.99 %, respectively, and the removal rates of organic dye molecules are nearly to 100 %. Besides, the composite photothermal membrane exhibits great stabilities in harsh conditions such as high salinities, long cycling, large light intensities, strong acid/alkali environments, and mechanical bending. Most importantly, the photothermal membrane shows a considerable cost-effectiveness of 89.4 g h −1 /$. Hence, this study might promote the commercialization of solar-driven interfacial evaporation desalination by collaboratively considering surface modification and substrate engineering for MXene.

A MAX phase (Ti 3 AlC 2 ) as a performance enhancer for poly(lactic acid) electrospun membranes in steam generation and solar desalination

Low cytotoxicity, antibacterial property, and curcumin delivery performance of toughness-enhanced electrospun composite membranes based on poly(lactic acid) and MAX phase (Ti 3 AlC 2 )

Ti3C2/PVDF Membrane for Efficient Seawater Desalination Based on Interfacial Solar Heating

Ti2NTx quasi-MXene modified polyamide thin film composite reverse osmosis membrane with effective desalination and antifouling performance

Performance improvement of polyethersulfone membranes with Ti3AlCN MAX phase in the treatment of organic and inorganic pollutants

3-aminopropyltriethoxysilane modified MXene on three-dimensional nonwoven fiber substrates for low-cost, stable, and efficient solar-driven interfacial evaporation desalination

Janus MXene-based photothermal membrane for efficient and durable water evaporation

Encapsulation of MXene/polydopamine in nitrogen-doped 3D carbon networks with high photothermal conversion efficiency for seawater desalination

Mxene-Decorated Magnetic Phase-Change Microcapsules for Solar-Driven Continuous Seawater Desalination with Easy Salt Accumulation Elimination

Transforming Ti3C2Tx MXene’s intrinsic hydrophilicity into superhydrophobicity for efficient photothermal membrane desalination

Novel post-heat treatment green biodegradable PLA@SiO 2 nanocomposite membrane for water desalination

Melt Electrospun Reduced Tungsten Oxide /Polylactic Acid Fiber Membranes as a Photothermal Material for Light-Driven Interfacial Water Evaporation.

Ti 3 C 2 T x MXene Nanoflakes Embedded with Copper Indium Selenide Nanoparticles for Desalination and Water Purification through High-Efficiency Solar-Driven Membrane Evaporation

Ultra-robust Vertically Aligned Three-Dimensional (3D) Janus Hollow Fiber Membranes for Interfacial Solar-Driven Steam Generation with Salt-Resistant and Multi-Media Purification

Effective ion sieving with Ti3C2Tx MXene membranes for production of drinking water from seawater

Effective ion sieving with Ti 3 C 2 T x MXene membranes for production of drinking water from seawater

Preparation of Phase‐change Composite Aerogel Materials and Its Application in Solar Saline‐alkali Water Desalination

Self-Assembled Hydrophobic/Hydrophilic Porphyrin-Ti 3 C 2 T x MXene Janus Membrane for Dual-Functional Enabled Photothermal Desalination

Janus porous membranes with asymmetric wettability and self-floating properties for solar desalination

MXene-PVA-TiO2-based photothermal-catalytic membrane with high structural stability for efficient desalination and photodegradation

Hydrophilicity and surface charge modulation of Ti3C2T x MXene based membranes for water desalination