Abstract:For several decades, urinary tract infections caused by catheter-associated devices have negatively impacted not only medical device utilization, but also patient health . As such, the creation of catheter materials with both superior biocompatibility and antibacterial properties has become necessary. This study aimed to produce electrospun membranes based on polylactic acid (PLA) with the incorporation of black phosphorus nanosheets (BPNS) and nano-zinc oxide (nZnO) particles, as well as a mixture of both, in order to design bifunctional membranes with enhanced bioactivity and antibacterial features. The optimum spinning process was determined through examination of various PLA mass concentrations, spinning solution propelling speeds, and receiving drum rotating speeds, with emphasis on the mechanical properties of PLA membranes. Additionally, the antibacterial properties and cytocompatibility of the ZnO-BP/PLA antibacterial membranes were explored. Results demonstrated that the ZnO-BP/PLA antibacterial membranes displayed a rich porous structure, with uniform distribution of nZnO particles and BPNS. With the increase of polylactic acid concentration and the decrease of spinning solution advancing and drum rotation speeds, the mechanical properties of the fiber membrane were significantly improved. Furthermore, the composite membranes exhibited remarkable photothermal therapy (PTT) capabilities when aided by the synergistic effect of BP nanosheets and ZnO. This was achieved through near-infrared (NIR) irradiation, which not only dissipated the biofilm but also enhanced the release capability of Zn 2+ . Consequently, the composite membrane demonstrated an improved inhibitory effect on both Escherichia coli and Staphylococcus aureus . The results of cytotoxicity and adhesion experiments also indicated good cytocompatibility, with cells growing normally on the surface of the ZnO-BP/PLA antibacterial membrane. Overall, these findings validate the utilization of both BPNS and n-ZnO fillers in the creation of novel bifunctional PLA-based membranes, which possess both biocompatibility and antibacterial properties for interventional catheter materials.

Low cytotoxicity, antibacterial property, and curcumin delivery performance of toughness-enhanced electrospun composite membranes based on poly(lactic acid) and MAX phase (Ti 3 AlC 2 )

Electrospun curcumin loaded poly(lactic acid) nanofiber mat on the flexible crosslinked PVA/PEG membrane film: Characterization and in vitro release kinetic study

Biofouling mitigation of Nb2AlC and Mo3AlC2 MXene-precursors doped polyether sulfone mixed matrix membranes for pathogen microorganisms

A MAX phase (Ti 3 AlC 2 ) as a performance enhancer for poly(lactic acid) electrospun membranes in steam generation and solar desalination

Preparation and properties of triethyl citrate plasticized chitosan‐based membranes for efficient release of curcumin

Thymol-loaded Polylactic Acid Electrospun Fibrous Membranes with Synergistic Biocidal and Anti-Bacterial Adhesion Properties Via Morphology Control

Dual-crosslinked Methacrylamide Chitosan/poly(ε-Caprolactone) Nanofibers Sequential Releasing of Tannic Acid and Curcumin Drugs for Accelerating Wound Healing.

Electrospun Microfiber Membranes Embedded with Drug-Loaded Clay Nanotubes for Sustained Antimicrobial Protection.

Preparation and performance characterization of electrospun tetracycline hydrochloride-loaded polyglycolic acid nanofibrous membrane

Cellulose nanocrystals/polyethylene glycol as bifunctional reinforcing/compatibilizing agents in poly(lactic acid) nanofibers for controlling long-term in vitro drug release

Combination of nano-hydroxyapatite and curcumin in a biopolymer blend matrix: Characteristics and drug release performance of fibrous composite material systems

Curcumin Functionalized Electrospun Fibers with Efficient pH Real- Time Monitoring and Antibacterial and Anti-inflammatory Properties

Synthesis of a novel multifunctional montmorillonite/L-malic-acid/curcumin/bacterial cellulose hybrid nanofilm with excellent heat insulation, antibacterial activity and cytocompatibility

Polyhydroxybutyrate/poly(ε‐caprolactone)‐based electrospun membranes loaded with amoxicillin‐potassium clavulanate halloysite nanotubes for biomedical applications

Solvent-free Cellulose Nanocrystal Fluids for Simultaneous Enhancement of Mechanical Properties, Thermal Conductivity, Moisture Permeability and Antibacterial Properties of Polylactic Acid Fibrous Membrane

Electrospun polylactic acid nanofiber membranes containing Capparis spinosa L . extracts for potential wound dressing applications

Poly (lactic acid) electrospun nanofiber membranes: Advanced characterization for biomedical applications with drug loading performance studies

Controlled Release of Curcumin and Hypocrellin A from Electrospun Poly(l-Lactic Acid)/Silk Fibroin Nanofibers for Enhanced Cancer Cell Inhibition

Bifunctional electrospun poly (L-lactic acid) membranes incorporating black phosphorus nanosheets and nano-zinc oxide for enhanced biocompatibility and antibacterial properties in catheter materials

Antibacterial and drug-release dual-function membranes of cross-linked hyperbranched cationic polymers

Curcumin‐Loaded Co‐Axial Electrospun Chitosan/Polyvinyl Alcohol/Calcium Chloride Nanofibrous Membranes for Wound Healing Enhancement