3-aminopropyltriethoxysilane modified MXene on three-dimensional nonwoven fiber substrates for low-cost, stable, and efficient solar-driven interfacial evaporation desalination
Ye Cao,Yijin Wang,Junli Nie,Chengjie Gao,Wei Cao,Weiwei Wang,He Xi,Wenhao Chen,Peng Zhong,Xiaohua Ma
DOI: https://doi.org/10.1016/j.jcis.2024.05.183
IF: 9.9
2024-05-28
Journal of Colloid and Interface Science
Abstract:Recently, the solar-driven interfacial evaporation desalination has attracted more and more attentions due to the advantages of low cost, zero energy consumption, and high water purification rate, etc. One of the bottlenecks of this emerging technique lies in a lack of simple and low-cost ways to construct three-dimensional (3D) hierarchical microstructures for photothermal membranes. To this end, a two-step strategy is carried out by combining surface functionalization with substrate engineering. Firstly, a silane coupling agent 3-aminopropyltriethoxysilane (APTES) is grafted onto an ideal photothermal material of Ti 3 C 2 T x MXene, to improve the nanochannel sizes and hydrophilicity, which are attributed to enlarged interspaces of MXene and introduced hydrophilic group e.g., –NH 2 and –OH, respectively. Secondly, a low-cost and robust nonwoven fiber (NWF) substrate, which has a 3D micron-sized mesh structure with interlaced fiber stacks, is employed as the skeleton to load enough APTES-grafted MXene by a simple soaking method. Benefited from above design, the Ti 3 C 2 T x -APTES/NWF composite membrane with a 3D hierarchical structure shows enhanced light scattering and utilization, water transport and vapor escape. A remarkable evaporation rate of 1.457 kg m −2 h −1 and an evaporation efficiency of 91.48 % are attained for a large-area (5 × 5 cm 2 ) evaporator, and the evaporation rate is further increased to 1.672 kg m −2 h −1 for a small-area (2 × 2 cm 2 ) device. The rejection rates of salt ions and heavy metal ions are higher than 99 % and 99.99 %, respectively, and the removal rates of organic dye molecules are nearly to 100 %. Besides, the composite photothermal membrane exhibits great stabilities in harsh conditions such as high salinities, long cycling, large light intensities, strong acid/alkali environments, and mechanical bending. Most importantly, the photothermal membrane shows a considerable cost-effectiveness of 89.4 g h −1 /$. Hence, this study might promote the commercialization of solar-driven interfacial evaporation desalination by collaboratively considering surface modification and substrate engineering for MXene.
chemistry, physical