Abstract:Recently, it has been widely reported that CO2 was utilized to produce valuable chemical feedstock with copper/zinc and metal oxide based catalysts, yet harsh conditions (high pressure and high temperature, etc.) are still essential for the activity and selectivity. Compared with the harsh conditions required in the direct conversion of CO2 to achieve high selectivity and activity, mild conditions in the indirect conversion of CO2 through the carbonate intermediate provides an alternative. Since CO2 can be easily transferred to carbonate under mild and even atmospheric pressure of CO2 in many reports, hydrogenation of carbonates to methanol at ambient condition presents an attractive strategy for the indirect conversion of CO2 with higher catalytic activity. In our previous work, we have reported that Cu/SiO2 catalyst achieved satisfying performance for the hydrogenation of diethyl carbonate with poor stability at long term running due to the agglomeration of active metal. Herein, we present that the catalytic activity and stability of the catalysts in the hydrogenation of carbonates could be efficiently improved by the addition of Cr. In this research, various Cr-promoted Cr-x-Cu/SiO2 catalysts were synthesized through an ammonia evaporation method. The effect of added Cr on the catalytic performance was investigated by the hydrogenation of diethyl carbonate (DEC) as a probe reaction system. The results showed that the Cr-x-Cu/SiO2 catalyst with 3 wt% Cr performed the preferable activity. Under the reaction conditions of temperature of 503 K, hydrogen pressure of 2.5 MPa and liquid hourly space velocity (LHSV) of 1.0 h(-1), the conversion of DEC could be 99%, while the selectivity of product methanol (86.2%) and space-time yields (STY) of methanol (5.6 mmol(MeOH.gcat)(-1). h(-1)) were enhanced significantly. The physicochemical properties of Crx-Cu/SiO2 catalysts were characterized by X-ray diffraction (XRD), N2 physical adsorption and desorption, transmission electron microscopy (TEM), H-2 temperature-programmed reduction (H-2-TPR) and in-situ diffuse reflection infrared Fourier transform spectroscopy (In-situ DRIFTS). The results revealed that the dispersion of active copper species was significantly improved. The copper chromite species formed by the interaction of copper and chromium could optimize the distribution of Cu(0) and Cu(I) and regulate adsorption construction of reactant, efficiently improving the catalytic performance and stability for the hydrogenation of diethyl carbonate to methanol.

Cr and Co-modified Cu/Al 2 O 3 as an efficient catalyst for the continuous synthesis of bis(2-dimethylaminoethyl)ether

A MOF-supported Chromium Catalyst for Ethylene Polymerization Through Post-Synthetic Modification

Highly Dispersed CrOx Nanoparticle-Modified NaZSM-5 for Dehydration of Methanol to Dimethyl Ether

Catalytic amination of diethylene glycol with tert‐butylamine to tertiarybutylaminoethoxyethanol over NiCu/Al 2 O 3 catalysts: Facilitation of NiCu alloy

Preparation, Structure And Performance Of [Cuo-Zno-Al2o3]/[Hzsm-5] Core-Shell Bifunctional Catalysts For One-Step Synthesis Of Dimethyl Ether From Co2+H-2

Catalytic amination of diethylene glycol with tert‐butylamine to tertiarybutylaminoethoxyethanol over NiCu/Al2O3 catalysts: Facilitation of NiCu alloy

Direct Synthesis of Dimethyl Ether on Supported Cu-Mn Catalysts

Promotional Effect of Cr on Cu/SiO2 Catalyst for the Production of Methanol from Carbonate Hydrogenation

Structural Requirements for Chemoselective Ammonolysis of Ethylene Glycol to Ethanolamine over Supported Cobalt Catalysts

Role of the Cu dopant in the textural and catalytic features of the Co/ZnO catalyst for dimethyl oxalate selective hydrogenation

Zn-Zr-Al Oxides Derived from Hydrotalcite Precursors for Ethanol Conversion to Diethyl Carbonate

Single-step dimethyl ether synthesis on a Cu/ZnO/Al_2O_3/ZrO_2+γ-Al_2O_3 bifunctional catalyst in slurry reactor

Design and Synthesis of Spherical-Platelike Ternary Copper-Cobalt-manganese Catalysts for Direct Conversion of Syngas to Ethanol and Higher Alcohols

Complete liquid-phase preparation and characterization of Cu-Zn-Al-Zr slurry catalysts for synthesis of dimethyl ether

Ethanol and Higher Alcohols Synthesis from Syngas over CuCoM (m=fe, Cr, Ga and Al) Nanoplates Derived from Hydrotalcite‐Like Precursors

Optimizing CO 2 Hydrogenation to DME through Tailored Interfacial Interactions: Weakening Synergy in CuZnZr and Al-Modified SBA-15 Catalysts

Synthesis of Dimethyl Ether on Supported Cu-Mn Catalysts

S/CuMgAl-41 as an efficient Hybrid catalyst for asymmetric addition reaction in isopropyl alcohol solvent

Catalytic amination of 1,6-hexanediol for synthesis of N, N, N', N'-tetramethyl-1,6-hexanediamine over Cu/Ni/Zn catalysts

A New Low-Cost and Effective Method for Enhancing the Catalytic Performance of Cu–SiO2 Catalysts for the Synthesis of Ethylene Glycol Via the Vapor-Phase Hydrogenation of Dimethyl Oxalate by Coating the Catalysts with Dextrin

Efficient CO Oxidative Coupling to Dimethyl Oxalate over the Pd/Al2O3 Nanocatalyst with the Assistance of Co Doping