Zhoutao Cen,Yuxin Wu,Jingyu Wang,Jie Liu,Minmin Zhou,Shukuan Chen,Dongqiang Zhao
Abstract:A deep understanding of the particle–wall collision (PWC) behaviors of non-spherical particles is important for managing gas–solid flows in industrial applications. It is important to identify the dominant parameters and to develop the common PWC prediction models for typical non-spherical particles. In this paper, different types of non-spherical particles were used to conduct the fundamental experiments. The effects of key parameters such as particle size, non-sphericity, wall roughness, and impact angle were analyzed. The results show that the trends of the collision coefficients with the impact angle for all non-spherical particles are similar. The dominant factors of particle–wall collisions are particle sphericity and wall roughness. A model with four parameters was fitted from the experimental data. The model can predict the collisions of non-spherical particles on rough steel walls with sizes ranging from 50 to 550 microns.
What problem does this paper attempt to address?
The problems that this paper attempts to solve are: **Deeply understand the behavior of non - spherical particle - wall collision (Particle - Wall Collision, PWC), identify the dominant parameters, and develop a general PWC prediction model for typical non - spherical particles**.
Specifically, the paper focuses on the following key issues:
1. **Collision behavior of non - spherical particles**:
- Non - spherical particles play an important role in gas - solid two - phase flows in industrial applications. Compared with spherical particles, the rebound behavior of non - spherical particles is more irregular, so more complex models are required to describe their collision characteristics.
2. **Identification of dominant parameters**:
- The paper analyzes the key parameters that affect the collision between non - spherical particles and the wall, including particle size, non - sphericity, wall roughness, and impact angle, etc. Through experimental research, it is determined which parameters play a dominant role in the collision behavior.
3. **Development of a collision model suitable for non - spherical particles**:
- Based on the experimental data, the paper fits an empirical model with four parameters. This model can predict the collision behavior of non - spherical particles on a rough steel wall and is applicable to particles with a particle size range of 50 to 550 micrometers.
4. **Filling the gaps in existing research**:
- Existing research mainly focuses on spherical particles or specific types of non - spherical particles, while there is less research on non - spherical particles such as coal and biomass, which are common in actual industrial applications. Through experimental research, the paper makes up for this deficiency.
### Formula summary
The formulas involved in the paper are mainly used to describe the dynamic behavior of particle collisions, such as the calculation of the restitution coefficient $e$ and the friction coefficient $f$. The following are examples of relevant formulas:
1. **Definition of the restitution coefficient $e$**:
$$
e=\frac{v_2}{v_1}
$$
where $v_1$ is the impact velocity and $v_2$ is the rebound velocity.
2. **Definition of the friction coefficient $f$**:
$$
f = \frac{F_f}{N}
$$
where $F_f$ is the frictional force and $N$ is the normal force.
3. **Stokes' law describes the velocity attenuation of particles relative to the fluid**:
$$
F_d=3\pi\mu d\cdot v
$$
where $F_d$ is the drag force, $\mu$ is the fluid viscosity, $d$ is the particle diameter, and $v$ is the particle velocity.
Through these formulas and experimental data, the paper proposes an empirical model for predicting the collision behavior of non - spherical particles.