Abstract:2,4-Dinitrotoluene (2,4-DNT) is a broadly applied nitroaromatic compound with multiple applications, and its simple production has resulted in its extensive utilization in producing explosives, dyes, and rubber. This substance is hazardous and induces genetic mutations in humans, fish, and microorganisms. Thus, this research was done to assess the effectiveness of the three-dimensional electro-Fenton (3D/EF) process employing magnetic activated carbon particle electrodes (GAC/Fe 3 O 4 ) in eliminating 2,4-dinitrotoluene from water-based solutions. In this experimental investigation, Fe 3 O 4 nanoparticles were created using the chemical co-precipitation technique. The G/β-PbO 2 anode was fabricated by electrochemically depositing PbO 2 layers on graphite sheets. G/β-PbO 2 and stainless steel were utilized as the anode and cathode, respectively. The structure, particle size, and properties of the GAC/Fe 3 O 4 nanocomposite were analyzed using FESEM, XRD, and EDX. The morphology of the G/β-PbO 2 electrode was also examined using SEM. The Taguchi experimental design method was employed to identify the optimal conditions. The outcomes demonstrated that higher reaction time and current density, as well as lower pH and pollutant concentration, resulted in improved 3D/EF efficiency. Accordingly, the optimum values of parmeters were identified to be a concentration of 2,4-DNT = 50 mg/L, pH = 3, electrolysis time = 100 min, and current density = 8 mA/cm 2 . With these parameters, the degradation efficiency of 2,4-DNT through the examined system was 98.42 %, alongside removal efficiencies of 84.69 % for COD and 79.67 % for TOC. Additionally, the results indicated an increase in the average oxidation state (AOS) (from 1.27 to 1.95) and carbon oxidation state (COS) (from 1.27 to 2.75) in the 3D/EF process, along with a decrease in the COD/TOC ratio (from 1.81 to 1.36), indicating the effectiveness of the 3D/EF system in enhancing the biodegradability of 2,4-DNT. Overall, the combined 3D/EF process with a G/β-PbO 2 anode has relatively high efficiency in degrading solutions containing DNT and can be considered a viable treatment option for wastewater containing substances such as 2,4-DNT.

A novel NiFe-LDH/AC three-dimensional particle electrode system and its application for degradation of N-nitrosamines: Condition optimization and degradation mechanism

Efficient degradation of N-nitrosopyrrolidine using CoFe-LDH/AC particle electrode via heterogeneous Fenton-like reaction

Degradation Strategy and Mechanism of Nitrogenous Disinfection By-products in Three-dimensional Electrochemical System

Simple preparation of monolithic N-doped electrode for efficient EF remediation of petrochemical wastewater: Performance, degradation pathways, and mechanism of different N-doped positions

Enhanced degradation of nitrogen-containing disinfection by-products via radical attack in ZnAl particle electrode system: Mechanism and density functional theory calculations

A novel bifunctional particle electrode with abundant Fe/Fe 3 C and Fe-N-C sites to enhance the performance of electro- in degrading organic pollutant

Nitrogen-doped iron-manganese porous carbon particle electrodes for electrocatalytic degradation of tetracycline: Interfacial reaction mechanisms

Direct-writing of three-dimensional porous Fe3N/FeS electrode for efficient degradation of organic pollutants in water through Electro-Fenton process

Insight into the Fe-Ni/biochar composite supported three-dimensional electro-Fenton removal of electronic industry wastewater

Complete Removal of N -Nitrosamines Using In-situ Constructed Sequential Microreactors: Synergies of Catalysis-Adsorption between N -Nitrosamines and Their Degradation Products

A novel synergistic three-dimensional electrode system for emerging contaminants degradation: Significantly enhanced Mn(III) aq generation by organic pollutants and GAC

Efficient degradation and Ni recovery from Ni-EDTA wastewater by Ni/GAC electrodes

Ultraefficient Heterogeneous Electro–Fenton Process Integrated a Natural Dual-Interface Air-Diffusion Cathode for Water Decontamination

Nitrogen-Doped Graphene Iron-Based Particle Electrode Outperforms Activated Carbon in Three-Dimensional Electrochemical Water Treatment Systems

Electrochemical Degradation Of N-Nitrosodimethylamine (Ndma) By Ti-Based Nano-Electrode: Kinetics, Mechanism And Effect On Ndma Removal

p-NP mineralization, total nitrogen removal and toxicity reduction using an alternating-electroreduction-electrooxidation system

Efficient Removal of Organic and Inorganic Pollutants from Water Using Fe3O4@SiO2@CS@EDTA Nanocomposite: Optimization via Response Surface Methodology (RSM)

Enhanced degradation of quinoline in three-dimensional electro- Fenton system using catalytic Fe-Co-Ni-P/g-C3N4 particles

Design and Development of Novel Composites Containing Nickel Ferrites Supported on Activated Carbon Derived from Agricultural Wastes and Its Application in Water Remediation

Electrochemical Ni-EDTA degradation and Ni removal from electroless plating wastewaters using an innovative Ni-doped PbO2 anode: Optimization and mechanism

Degradation of 2,4-dinitrotoluene from aqueous solutions by three-dimensional electro-Fenton with magnetic activated carbon particle electrodes (GAC/Fe 3 O 4 )