Abstract:Electro-reduction of O2 to generate H2O2 is an attractive alternative to the current anthraquinone process and quietly necessary for the chemical industries and environmental remediation. It is general that sufficient porous structure contributes to expose more catalytic active sites and shorten diffusion paths for the heterogeneous catalysis of O2. In this work, initially, the Fe3O4 nanoparticles embedded graphite felt (Fe3O4@GF) is prepared through a mild hydrothermal following with thermal reduction method. This special combination not only provides iron source for the electro-Fenton reaction, but also supplies rich active sites from the Fe3O4 embedded structure with abundant cracks, which are beneficial to increase the reaction rate. Compared with raw graphite felt (RGF), the fresh Fe3O4@GF exhibits superior pollutant degradation kinetics with more than 400% increase and approximately 37.8% improvement to the removal of total organic carbon. 98% decolorization of rhodamine B (RhB) can be achieved in just 5 minutes, and quickly complete 100% removal of RhB in the next few seconds. As the electro-Fenton reaction progresses, Fe3O4 dissolves in the electrolyte, leaving porous structure on the surface of the GF to form a porous GF (PGF), and the rapid radical reaction activates GF surface. Both the chemical etching of Fe3O4 and the electro-Fenton process can further increase the specific surface area, defects and actives sites of the electrode. As expected, the active PGF exhibits favorable performance of H2O2 production among in pH=1 (320.0±36.5 mg L-1), 3 (301.9±13.2 mg L-1) and 7 (320.4±21.2 mg L-1) electrolyte. The degradation performance of PGF does not significantly decay even after 20 times repeated use, indicating the good structural stability and long-term durability. The superiority of the in-situ Fe source and fast reaction kinetics for electro-Fenton of Fe3O4@GF is confirmed, and this holey-engineered strategy also provides the possibility to achieve swift water purification and open up a new way for developing efficient carbon-based electrodes.

Direct-writing of three-dimensional porous Fe3N/FeS electrode for efficient degradation of organic pollutants in water through Electro-Fenton process

A novel bifunctional particle electrode with abundant Fe/Fe 3 C and Fe-N-C sites to enhance the performance of electro- in degrading organic pollutant

Efficient electro-Fenton processes on a novel self-supported single-atom Fe electrode: Mechanism and practical application

In situ generated iron oxide nanosheet on iron foam electrode for enhanced electro-Fenton performance toward pharmaceutical wastewater treatment

Fabrication of Fe<SUB>2</SUB>O<SUB>3</SUB>/TiO<SUB>2</SUB> Nanotube Electrode and Its Photoelectrocatalytic Performance in Dye Wastewater Degradation

3D-TNAs/N-TiO 2 photoanode assisted heterogeneous electro-Fenton with a novel Fe-MOFs@CF cathode for efficient synergetic oxidation of organic contaminants

Enhanced heterogeneous electro-Fenton process for degradation of rhodamine B: FeOCl/CF@AB composite cathode with superior efficiency and sustainability

Self-cycled Photocatalytic Fenton System and Rapid Degradation of Organic Pollutants over Magnetic 3D MnS Nanosheet/iron-Nickel Foam

Insight into the Fe-Ni/biochar composite supported three-dimensional electro-Fenton removal of electronic industry wastewater

Ultraefficient Heterogeneous Electro–Fenton Process Integrated a Natural Dual-Interface Air-Diffusion Cathode for Water Decontamination

Highly Efficient Heterogeneous Electro-Fenton Degradation of Organic Pollutants Using a FeNi-OH/NF Cathode

Simultaneously Providing Iron Source towards Electro-Fenton Process and Enhancing Hydrogen Peroxide Production via a Fe3O4 Nanoparticles Embedded Graphite Felt Electrode.

A novel NiFe-LDH/AC three-dimensional particle electrode system and its application for degradation of N-nitrosamines: Condition optimization and degradation mechanism

3D-printed MoS2/Ni electrodes with excellent electro-catalytic performance and long-term stability for dechlorination of florfenicol

Fabrication of novel FeS2 NWs/Ti3C2 cathode for Photo-Electro-Fenton degradation of sulfamethazine

Three-dimensional functional carbon nanotube architecture as a highly efficient and active indirect catalyst for degradation of 4-chlorophenol

Natural air diffusion electrode modified with metal-organic frameworks derived Fe doped porous carbon for sulfamethazine degradation by heterogeneous electro-Fenton

A highly energy-efficient flow-through electro-Fenton process for organic pollutants degradation

Fe3N-decorated porous carbon frameworks from wheat flour with dual enzyme-mimicking activities for organic pollutant degradation

Simple preparation of monolithic N-doped electrode for efficient EF remediation of petrochemical wastewater: Performance, degradation pathways, and mechanism of different N-doped positions

Effective Heterogeneous Fenton-Like Degradation of Antibiotics by Ferroferric Oxide Nanoparticle Coated Reduced Iron Powder with Accelerated Fe(II)/Fe(III) Redox Cycling