Abstract:Proton exchange membrane fuel cells, PEMFCs, are one of the most promising means of obtaining electrical energy in the rapidly developing hydrogen energy industry. Maintaining the high specific energy characteristics of PEMFCs requires effective control and diagnostic systems with the ability to detect malfunctions and suboptimal operating modes at the early stages of development. Methods that allow in-process diagnostics, such as impedance, relaxation, and fluctuation-noise characteristic analysis, are best suited for this purpose. The application of such methods implies the use of small-signal electrical models, of which the Ershler–Randles equivalent circuit is the most widely used. The most challenging aspect of modeling and identification based on the experimental data of this circuit is diffusion impedance. The present work addresses the issue of approximating Warburg impedance using Cauer circuits and minimizing their parametric description, thereby facilitating the effective determination of the diffusion impedance parameters during identification based on experimental data. The work demonstrates that it is feasible to delineate short-circuited Warburg impedance in a wide range of the frequency spectrum through the utilization of Cauer networks of the second to fifth order, characterized by only two intrinsic parameters: the time constant and resistance. In this case, the RMS approximation errors do not exceed 0.5%. It is proposed that the second- and third-order models be employed, as the first-order model lacks the requisite accuracy, and the use of models of higher orders results in an increase in the complexity of the computational procedures. Furthermore, the error is predominantly attributable to the high-frequency range. In practical applications, its impact will diminish, as the total impedance of the PEMFC within this range is dependent upon the other elements of the equivalent circuit. The proposed approaches to the description of small-signal electrical models will facilitate the enhancement of signal-processing procedures for diagnostics and modeling of the operational modes of PEMFC and other electrochemical sources of electric energy, thereby increasing their efficiency.

Experimental validation of a purely analytical model dedicated to fuel cell diagnosis

A Two-Dimensional Analysis of Mass Transport in Proton Exchange Membrane Fuel Cells

Diagnostic and Performance Analysis of a Water Electrolyzer by Magnetic Field Measurements

A current density distribution reconstruction method in proton exchange membrane fuel cell from external magnetic field based on convolutional neural network

Fault Diagnosis for Proton Exchange Membrane Fuel Cell Systems Via Improved Equivalent Circuit Model and Multiple Support Vector Machines

Experimental and Modeling Analyses of the Correlation between Local 3D Heterogeneities and the Macroscopic Observers of a Proton Exchange Membrane Fuel Cell Stack

PEMFCs Model-Based Fault Diagnosis: A Proposal Based on Virtual and Real Sensors Data Fusion

A Method Based on Measured Boundary Conditions for Reconstructing the Magnetic Field Distribution of an Electromagnetic Mechatronic System

Research on Fault Diagnosis Method of FCV Power Battery Based on Physical Model

A methodology to develop multi-physics dynamic fuel cell system models validated with vehicle realistic drive cycle data

Model‐based diagnosis of proton‐exchange membrane fuel cell cathode catalyst layer microstructure degradation

Multidimensional Modelling Of Polymer Electrolyte Fuel Cells Under A Current Density Boundary Condition

Modeling and validation of fuel cell PEMFC

Experimental investigation of stable the proton exchange membrane fuel cell control using magnetic sensor probes

An Electrochemical-Based Fuel-Cell Model Suitable for Electrical Engineering Automation Approach

Model-Based Data Driven Approach for Fault Identification in Proton Exchange Membrane Fuel Cell

Performance evaluation on full-scale proton exchange membrane fuel cell: Mutual validation of one-dimensional, three-dimensional and experimental investigations

Data-driven Fault Diagnosis for PEM Fuel Cell System Using Sensor Pre-Selection Method and Artificial Neural Network Model

Three-dimensional multi-field digital twin technology for proton exchange membrane fuel cells

Small-Signal Electrical Model of PEM Fuel Cell

Model-Based Fault Tolerant Control for the Thermal Management of PEMFC Systems