Small-Signal Electrical Model of PEM Fuel Cell

E. S. Denisov

DOI: https://doi.org/10.1134/s0040579524600980

2024-11-01

Theoretical Foundations of Chemical Engineering

Abstract:Proton exchange membrane fuel cells, PEMFCs, are one of the most promising means of obtaining electrical energy in the rapidly developing hydrogen energy industry. Maintaining the high specific energy characteristics of PEMFCs requires effective control and diagnostic systems with the ability to detect malfunctions and suboptimal operating modes at the early stages of development. Methods that allow in-process diagnostics, such as impedance, relaxation, and fluctuation-noise characteristic analysis, are best suited for this purpose. The application of such methods implies the use of small-signal electrical models, of which the Ershler–Randles equivalent circuit is the most widely used. The most challenging aspect of modeling and identification based on the experimental data of this circuit is diffusion impedance. The present work addresses the issue of approximating Warburg impedance using Cauer circuits and minimizing their parametric description, thereby facilitating the effective determination of the diffusion impedance parameters during identification based on experimental data. The work demonstrates that it is feasible to delineate short-circuited Warburg impedance in a wide range of the frequency spectrum through the utilization of Cauer networks of the second to fifth order, characterized by only two intrinsic parameters: the time constant and resistance. In this case, the RMS approximation errors do not exceed 0.5%. It is proposed that the second- and third-order models be employed, as the first-order model lacks the requisite accuracy, and the use of models of higher orders results in an increase in the complexity of the computational procedures. Furthermore, the error is predominantly attributable to the high-frequency range. In practical applications, its impact will diminish, as the total impedance of the PEMFC within this range is dependent upon the other elements of the equivalent circuit. The proposed approaches to the description of small-signal electrical models will facilitate the enhancement of signal-processing procedures for diagnostics and modeling of the operational modes of PEMFC and other electrochemical sources of electric energy, thereby increasing their efficiency.

engineering, chemical