Abstract:The poor rate performance and low discharge capacity of LiCoO2 limit its applications. Therefore, in this work, we synthesized Li1-xMxCoO2 (M = Na, Zr, Nb) via solid-phase synthesis to improve its properties. X-ray diffraction (XRD) results suggest that the doping elements were successfully doped into LiCoO2. The electrochemical properties showed that the samples doped with the high-valence elements Zr and Nb had a higher capacity, better cycle stability, and better rate performance than those doped with the low-valence element Na. In particular, the capacity retention of LiCoO2, Li0.97Na0.03CoO2, Li0.99Zr0.01CoO2, and Li0.99Nb0.01CoO2 was 68, 42, 85, and 87%, respectively, after 80cycles at a rate of 10 C at 55 degrees C. However, doping of Zr and Nb into the Li+ site of LiCoO2 will reduce the content of Li+. And, less Li+ extracted in the cathode material resulting in low discharge capacity under low current density. The larger radius of Na+ is incorporated into the Li slab and enlarged the interlayer spacing of the (003) plane. The larger (003) interplanar spacing can significantly facilitate the lithium diffusion and is also favorable to the rate capability. The differential scanning calorimetry (DSC) and thermogravimetric (TG) analysis results demonstrated that the Zr-doped and Nb-doped LiCoO2 had a higher thermal stability in the charged state than the Na-doped LiCoO2. Additionally, the resistances of the Zr-doped and Nb-doped electrodes were much lower than that of the undoped electrode. Our research results indicate that doping with high-valence elements is a very effective strategy for optimizing the electrochemical performance of LiCoO2 and that this method can also be extended to other cathode materials.

Improvement of the cycle life of LiCoO2 powder by Sr doping

Preparation and Electrochemical Properties of Li[Ni1/3Co1/3Mn1−x/3Zrx/3]O2 Cathode Materials for Li-ion Batteries

Improving the Cycling Performance, Rate Capacity, and Thermal Stability of LiCoO2 by Doping High-Valence Ions into the Li+ Site

Heightening the long cycling stability and reducing oxygen loss of Li-rich cathode materials by Mo–F Co-doping for half/full lithium-ion batteries

Effects of SrO/Li_2O/La_2O_3/Ta_2O_5/TiO_2-coating on Electrochemical Performance of LiCoO_2

Improving electrochemical performances of Lithium-rich oxide by cooperatively doping Cr and coating Li3PO4 as cathode material for Lithium-ion batteries

Improving diffusion kinetics and phase stability of LiCoO2 via surface modification at elevated voltage

Improving electrochemical performances of Lithium-rich oxide by cooperatively doping Cr and coating Li<sub>3</sub>PO<sub>4</sub> as cathode material for Lithium-ion batteries

The Synergetic Effects of Ru and Al Co‐Doping for Improved Cyclability of LiCoO2 at High Voltages

Surface Modification Improves Spinel LiCoO2 Li-Ion Battery Cathode Materials Grown by Low Temperature Solvothermal Flow Reaction

Effects of Al and Co doping on the structural stability and high temperature cycling performance of LiNi0.5Mn1.5O4 spinel cathode materials

A strontium-doped Li 2 FeSiO 4 /C cathode with enhanced performance for the lithium-ion battery

Nanoscale Control and Tri-Element Co-Doping of 4.6 V LiCoO2 with Excellent Rate Capability and Long-Cycling Stability for Lithium-Ion Batteries.

Effects of Abundant Co Doping on the Structure and Electrochemical Characteristics of LiMn1.5Ni0.5−xCoxO4

Improving the cycling stability of LiCoO 2 at 4.5V through co-modification by Mg doping and zirconium oxyfluoride coating

Simultaneous Near‐Surface Trace Doping and Surface Modifications by Gas–Solid Reactions during One‐Pot Synthesis Enable Stable High‐Voltage Performance of LiCoO2

From Metal to Cathode Material: in situ Formation of LiCoO2 with Enhanced Cycling Performance and Suppressed Phase Transition

Insight into Cobalt-Doping in Li2FeSiO4 Cathode Material for Lithium-Ion Battery

Synthesis And Characterization Of Li(Li0.2mn0.4fe0.2m0.2)O-2 (M=Co, Ni, Cr, Al) Cathode Materials For Li-Ion Batteries

Effect of Co 3+ Doping on Crystal Structure and Electrochemical Properties of Spinel LiMn 2 O 4 Cathode Material

Enhanced electrochemical performance of La-doped Li-rich layered cathode material