Abstract:An improved ghost-cell immersed boundary method coupled with a high-order finite difference scheme is currently proposed to numerically simulate the reflected shock/boundary layer interaction in a wavy-wall tube. The main improvement of current algorithm involves the particular treatment of the solid boundary reconstruction procedure by using both ghost points in solid domain and forcing points in fluid domain together. Owing to this kind of improvement operation, the amount of points used to recover the solid boundary increases greatly and will inevitably promote the accuracy of solid boundary reconstruction, which will play a significant role in the current high-order accurate numerical simulation. A typical validation case of 2-dimensional shock/circular cylinder interaction is conducted and demonstrate that the current improved numerical method can be used to capture the flow details such as shock bifurcation and small vortex very well and improve the numerical precision greatly. The improved method is then applied to numerically investigate the effects of boundary layer on the propagation of the shock in a wavy-wall tube. It is observed that, at low Mach number, the existence of boundary layer has little effect on the shock propagation. As the Mach number increases to 1.9, some certain complicated flow features will occur due to the enhanced boundary layer effects. In the early stage, the flow structures are nearly the same as those without the boundary layers. In the transition stage, a high-speed shear band behind the leading shock is observed and finally evolves into a worm-like structure, whose instability is illustrated by qualitative assessment on its flow features. In the developing stage, a remarkable shock bifurcation phenomenon is present and the worm-like structures will start shedding regularly, which will induce a series of scattering-like waves and asymmetrical flow fields. These characteristics demonstrate that the bifurcated shock waves located in upper and lower walls of the wavy-wall shock tube act as a primary trigger to gradually destabilize the shocked flow.

Investigation on the three-dimensional shock wave/turbulence boundary layer control induced by the secondary recirculation jets

Optimization study on adaptive control performance of shock wave/boundary layer interactions with different secondary recirculation configurations

Influences of microjet pressure and number of microjets on the control of shock wave/boundary layer interaction

Validation and Analyses of QCR Correction Turbulence Model in Sub-/Super-sonic Inner Flows

Numerical Study of Active Shock Control for Transonic Aerodynamics

Effects of Micro Blowing/suction Flow Control Devices on a NACA0015 Airfoil

Study of the streamwise location of a micro vortex generator for a separation-control mechanism in supersonic flow

Control of shock wave/boundary layer interaction induced by the microjet configuration

Numerical Simulation on the Shock Wave/Boundary Layer Interaction with Heating/Cooling Effect

Numerical Simulations of Shock/obstacle Interactions Using an Improved Ghost-Cell Immersed Boundary Method

Experimental study on the hypersonic double incident shock wave/boundary layer interaction regulated by plasma actuation array

Shockwave-Boundary Layer Interaction Control by Plasma Aerodynamic Actuation: an Experimental Investigation

Comparative study on single-incident and dual-incident shock wave/turbulent boundary layer interactions with identical total deflection angle

Investigation of Practical Flow Control Methodologies with RANS/LES Hybrid Methods

On the shock wave boundary layer interaction in slightly rarefied gas

On the shock wave boundary layer interaction in slightly-rarefied gas

A Study of Arc Plasma Energy Deposition Flow Control on Blunt-Headed Protuberance Induced STBLI

Magnetohydrodynamic Control of a Hypersonic Shock–Turbulent Boundary Layer Interaction

Numerical study on the flow control mechanisms of an off-surface circular cylinder for wall-bounded flows with separation

Passage shock wave/boundary layer interaction control for transonic compressors using bumps

Control of Separated Flow Transition over a Highly Loaded Compressor Blade via Dynamic Surface Deformation