Abstract:Mullite-Al2O3-SiC composites were in-situ synthesized through carbothermal reduction reaction of fly ash (FA) with a high alumina content and activated carbon (AC). The effects of sintering temperature, holding time, and amount of AC on the β-SiC yield, microstructure, dielectric properties, and electromagnetic (EM) absorption performance of the composites in the 2–18 GHz frequency range were studied. The results show that increasing the AC improves the porosities of the composites, with the highest porosity of 56.17% observed. The β-SiC yield varies considerably as the sintering parameters were altered, with a maximum yield of 23% achieved under conditions of 12 wt% AC, 1400 °C sintering temperature, and 3 h holding time. With a thickness of 3.5 mm, this composite has excellent EM absorption performance, exhibiting a minimum reflection loss (RLmin) of -51.55 dB at 7.60 GHz. Significantly, the maximum effective absorption bandwidth (EAB) reaches 3.39 GHz when the thickness is 3.0 mm. These results demonstrate that the composite prepared under ideal conditions can absorb 99.99% of the waves passing through it. Because of the interfacial polarization, conductive loss, and impedance matching of the heterostructure, the synthesized mullite-Al2O3-SiC composites with densities ranging from 1.43 g/cm3 to 1.62 g/cm3 demonstrate outstanding EM attenuation capabilities. Therefore, this study presents a remarkable way of utilizing fly ash to fabricate inexpensive, functional ceramic materials for EM absorption applications.

Modeling for the electromagnetic properties and EMI shielding of Cf/mullite composites in the gigahertz range

Dielectric response and electromagnetic wave absorption of novel macroporous short carbon fibers/mullite composites

Preparation and High-temperature Oxidation Properties of Cf/mullite Composites

Design on the Microwave Absorber with Lattice of 3D Composite Element for X-band Application

Microwave Absorbability of Unidirectional SiC Fiber Composites As a Function of the Constituents’ Properties

3D Ti3C2Tx MXene/C Hybrid Foam/epoxy Nanocomposites with Superior Electromagnetic Interference Shielding Performances and Robust Mechanical Properties

X-band electromagnetic absorption and mechanical properties of mullite/Ti3AlC2 composites

EMI shielding performance of nanocomposites with MWCNTs, nanosized Fe 3 O 4 and Fe

Electrically conductive and mechanically strong graphene/mullite ceramic composites for high-performance electromagnetic interference shielding.

High‐temperature electromagnetic wave absorption properties of C f /SiCNFs/Si 3 N 4 composites

Electromagnetic interference shielding and microwave absorption materials: A virtual special issue

The Electromagnetic Wave Absorption Performance and Mechanical Properties of Cement-Based Composite Material Mixed with Functional Aggregates with High Fe2O3 and SiC

High-Temperature, Lightweight Ceramics with Nano-Sized Ferrites for EMI Shielding: Synthesis, Characterisation, and Potential Applications

Fe Nanoparticles and CNTs Co-Decorated Porous Carbon/graphene Foam Composite for Excellent Electromagnetic Interference Shielding Performance

Thermally stable carbon-coated SiC/polydimethylsiloxane nanocomposites for EMI shielding in the terahertz range

Impedance matching optimization of SiCf/Si3N4–SiOC composites for excellent microwave absorption properties

Fabrication method, dielectric properties, and electromagnetic absorption performance of high alumina fly ash-based ceramic composites

1Cofe/c Nanosheets on Hollow Carbon Fibers As Composite Fabrics for Electromagnetic Interference Shielding

Simultaneously Enhancing Mechanical and Microwave Absorption Properties of Cf/SiC Composites Via SiC Nanowires Additions

Reprint of Graphene Foam/carbon Nanotube/poly(dimethyl Siloxane) Composites for Exceptional Microwave Shielding Part A Applied Science and Manufacturing

Electromagnetic interference shielding properties of polymer derived SiC-Si3N4 composite ceramics