Abstract:Basalt fiber-reinforced polymer (BFRP) reinforced concrete is a new alternative to conventional steel-reinforced concrete due to its high tensile strength and corrosion resistance characteristics. However, as BFRP is a brittle material, unexpected failure of concrete structures reinforced with BFRP may occur. In this study, the damage initiation and progression of BFRP-reinforced concrete slabs were monitored using the acoustic emission (AE) method as a structural health monitoring (SHM) solution. Two simply supported slabs were instrumented with an array of AE sensors in addition to a high-resolution camera, strain, and displacement sensors and then loaded until failure. The dominant damage mechanism was concrete cracking due to the over-reinforced design and adequate BFRP bar-concrete bonding. The AE method was evaluated in terms of identifying the damage initiation, progression from tensile to shear cracks, and the evolution of crack width. Unsupervised machine learning was applied to the AE data obtained from the first slab testing to develop the clusters of the damage mechanisms. The cluster results were validated using the k-means supervised learning model applied to the data obtained from the second slab. The accuracy of the K-NN model trained on the first slab was 99.2% in predicting three clusters (tensile crack, shear crack, and noise). Due to the limitation of a single indicator to characterize complex damage properties, a Statistical SHapley Additive exPlanation (SHAP) analysis was conducted to quantify the contribution of each AE feature to crack width. Based on the SHAP analysis, the AE duration had the highest correlation with the crack width. The cumulative duration of the AE sensor near the crack had close to 100% accuracy to track the crack width. It was concluded that the AE sensors positioned at the mid-span of slabs can be used as an effective SHM solution to monitor the initiation of tensile cracks, sudden changes in structural response due to major damage, damage evolution from tensile to shear cracks, and the progression of crack width.

Monitoring depth and width of cracks in underwater concrete structures using embedded smart aggregates

Towards an Automated Crack Monitoring using Distributed Fiber Optic Sensors

Crack monitoring on concrete structures with distributed fiber optic sensors—Toward automated data evaluation and assessment

Monitoring of crack repair in concrete using spherical smart aggregates based on electromechanical impedance (EMI) technique

Time Reverse Modeling of Damage Detection in Underwater Concrete Beams Using Piezoelectric Intelligent Modules

Crack Detection of FRP-Reinforced Concrete Beam Using Embedded Piezoceramic Smart Aggregates

Feasibility of Water Seepage Monitoring in Concrete with Embedded Smart Aggregates by P-Wave Travel Time Measurement

Experimental Research on Monitoring Concrete Expansion and Cracking Induced by Corrosion based on Distributed Optical Fiber Sensor

Investigating the Self-Healing Performance of Cracked Undersea Constructions

A Monitoring Method Based On Fbg For Concrete Corrosion Cracking

Multi-sensing investigation of crack problems for concrete dams based on detection and monitoring data: A case study

Exploratory Study on Sulfate Attack Monitoring of Concrete Structures Using Piezoceramic Based Smart Aggregates

Development and Application of a Structural Health Monitoring System Based on Wireless Smart Aggregates

Experimental Research on Corrosion-Induced Cracking Monitoring Based on Optical Fiber Sensor

Exploratory Study on Water Seepage Monitoring of Concrete Structures Using Piezoceramic Based Smart Aggregates

Experimental Study on Monitoring Damage Progression of Basalt-FRP Reinforced Concrete Slabs Using Acoustic Emission and Machine Learning

Damage Detection of L-Shaped Concrete Filled Steel Tube (L-CFST) Columns under Cyclic Loading Using Embedded Piezoceramic Transducers

Damage location, quantification and characterization of steel-concrete composite beams using acoustic emission

Multiple Crack Detection of Concrete Structures Using Impedance-based Structural Health Monitoring Techniques

Experimental Research on Concrete Crack Recognizing and Monitoring Based on Distributed Fiber Sensor

A Cross-Scanning Crack Damage Quantitative Monitoring and Imaging Method