Abstract:The reactor coolant pump is a key equipment in a nuclear power plant. If the leakage exceeds a certain threshold, it may cause reactor overheating and shutdown. The reactor coolant pump leakage fault usually has two problems: corrosion and scaling. Accurately and efficiently diagnosing the leakage fault mode as early as possible and predicting its remaining useful life (RUL) are important for taking timely maintenance measures. In this paper, an integrated method is proposed. First, the cross-sectional area of the first seal is extracted as a fault indicator. The motivation is that corrosion may enlarge the cross-sectional area, and scaling may reduce the cross-sectional area. Based on the fluid mechanics theory, an integrated model with several uncertain parameters is established among the cross-sectional area, temperature, and leakage at the inlet and outlet of the first seal. In the diagnosing process, a modified change-detection method is proposed to detect the starting point of degradation. Then, the unknown parameters in the previous relation are estimated, and the degrading data before the starting point of degradation are used to diagnose the leakage fault mode. Second, a time-series model of the autoregressive integrated moving average (ARIMA) is established to predict the remaining useful life based on the degrading data after the starting point of degradation. Finally, the leakage degrading data from six reactor coolant pumps of a nuclear power plant is used to perform the leakage fault mode diagnosis and life prediction with degradation point detection error rates not exceeding 4%, fault mode diagnosis correction rates 100% and practical RUL predicting results, which proves that the proposed integrated method is accurate and efficient. The proposed integrated method combines the advantages of both the physical model diagnosis and the data-driven model diagnosis and innovatively make use of the quantity of flow from the output side of the primary pump as the monitoring indicator and the cross-sectional area as the characteristic index together to diagnose the leakage fault mode happened to the seal and predict its RUL, which can meet the needs of actual operation and maintenance to ensure a healthy and stable operation of the pump and prevent unexpected shutdowns of nuclear power plants and serious accidents.

Nonhomogeneous Poisson Process Model for Estimating Mean Time Between Failures of the JE01-AP03 Primary Pump Implemented on the RSG-GAS Reactor

Prognostics and Health Management for Maintenance-Dependent Processes

Imperfect Maintenance Scheduling for High Pressure Feedwater Heater System in Nuclear Power Plant

Reliability analysis for the reactor protection system of HTR-PM

Modeling interconnections of safety and financial performance of nuclear power plants, part 3: Spatiotemporal probabilistic physics-of-failure analysis and its connection to safety and financial performance

Software reliability modelling of Reactor Protection System based on change point and severity analysis

Petri nets based reliability modeling of reactor protection system considering periodic surveillance test

Optimized Online Remaining Useful Life Prediction for Nuclear Circulating Water Pump Considering Time-Varying Degradation Mechanism

Probabilistic fracture mechanics analyses of a reactor pressure vessel using the irradiation embrittlement evaluation based on the Bayesian nonparametric method

An integrated method for the leakage fault mode diagnosis and life prediction of the reactor coolant pump

Relationship Between Fuel Reliability and I-131/I-133 in the Primary Coolant of CPR1000 PWRs

A Cumulative Damage Model for Tubes in Nuclear Power Plants Subject to Continuous Degradation and Multi-Effect Shocks under Dynamic Environments

A multi-state Semi-Markov model for Nuclear Power Plants piping systems subject to fatigue damage and random shocks under dynamic environments

A Case Study of GAMM (Graphical Analysis for Maintenance Management) Applied to Water Pumps in a Sewage Treatment Plant, Chile

Estimating Residual Life Distributions of Complex Operational Systems Using a Remaining Maintenance Free Operating Period (RMFOP)-Based Methodology

Equipment PHM using non-stationary segmental hidden semi-Markov model

Study of Reliability Prediction Method and Uncertainty Analysis of the Pump and Valve of a Floating Nuclear Power Plant

Safety integrity level evaluation of nuclear centrifugal pump based on performance degradation data

Predicting the Accumulated Number of Plugged Tubes in a Steam Generator Using Statistical Methodologies

Calculating Physical Failure Probability of Htr-10'S Residual Heat Removal System by Response Surface Method

Forecasting the Remaining Useful Life of Filters in Nuclear Power Plants