Abstract:The heat pipe cooled reactor is an advanced reactor design which is nearly solid-state with an array of in-core heat pipes for passive heat transfer. The local heat pipe failure probability is certainly high over the reactor lifetime. Therefore, the reactor design must include consideration of heat pipe failure accidents which needs to be explored in-depth. The Monte Carlo neutron transport code RMC was used with the general finite element analysis software ANSYS Mechanical to analyze the thermal/mechanical characteristics of a megawatt heat pipe cooled reactor for both normal and heat pipe failure conditions. The simulations were verified against a previous study with the predicted temperature distributions being consistent with each other with an absolute error of less than 3 K. Further analyses show that a 2-D model simulation can also well represent the 3-D model for heat pipe failure accident analyses. Sterbentz et al. (2017) simplified the heat pipe model with a constant temperature boundary condition along the evaporator wall of 950.15 K regardless of the heat load or heat pipe operating temperature. Therefore, a heat pipe subroutine was added to the codes to predict the heat pipe temperatures during a heat pipe failure accident. The results show that the heat pipe failure will cause larger temperature rises and stress concentrations. The heat pipe wall temperatures in the core differ from each other with the differences between the heat pipe loads during normal heat pipe operation and with failures reflecting the local effect of the heat pipe failures. The operating conditions far from the failure area are little affected (<20 K temperature change) by a single heat pipe failure. The effects of the heat pipe failure on the reactor core reactivity and local power distribution were also analyzed with a reactivity change of less than 5 pcm and a local power change of less than 0.1%. Therefore, the heat pipe failure can be analyzed in steady-state simulations with unchanged power distributions. (C) 2020 Elsevier Ltd. All rights reserved.

Calculating Physical Failure Probability of Htr-10'S Residual Heat Removal System by Response Surface Method

Assessing physical process failure probability of passive system in an advanced reactor by using M.C. method

Safety Margins Confidence Estimation for a Passive Residual Heat Removal System.

Passive system accident scenario analysis by simulation

A Model for Passive System Reliability Analysis

Application of Reliability Assessment Method of Passive System in AP1000 Passive ERVC System

Reliability Assessment Of Reactor Ap1000 Passive Ervc System

Thermal Hydraulic Analysis of High-Temperature Gas-Cooled Reactor Pebble-Bed Module Using a Systematic Parameter Estimation Approach

Calculation Analysis on the Natural Circulation of a Passive Residual Heat Removal System for IPWR

Application of Sensitivity Analysis in Reliability Research of Passive System

Analysis of Passive Residual Heat Removal System of Modular High Temperature Gas-Cooled Reactor

Operating Characteristic Analysis of Passive Residual Heat Removal System of HTR-PM

Uncertainty analysis of toxic gas leakage accident in cogeneration high temperature gas-cooled reactor

Preliminary Investigation of THFR Passive Residual Heat Removal System

Multi-experts analytic hierarchy process for the sensitivity analysis of passive safety system

Stress and Seismic Calculation of HTR-10 Primary Loop Pressure Relief System (K417)

Heat pipe failure accident analysis in megawatt heat pipe cooled reactor

Reliability analysis for the reactor protection system of HTR-PM

Quick Evaluation Method for Defect Exceeding the Allowable Flaw Size in Pressure Vessel of Nuclear Reactor for Power Plant and Space Heating

Variance Decomposition Sensitivity Analysis of a Passive Residual Heat Removal System Model

Human reliability analysis of shared equipment in multi-unit site