Abstract:This paper presents the achievements gained in solid sorption refrigeration prototypes since the end of the l970s, when interest in sorption systems was renewed. The applications included are ice making and air conditioning. The latter includes not only cooling and heating, but also dehumidification by desiccant systems. The prototypes presented were designed to use waste heat or solar energy as the main heat source. The waste heat could be from diesel engines or from power plants, in combined cooling, heating and power systems (CCHP). The current technology of adsorption solar-powered icemakers allows a daily ice production of between 4 and 7kgm−2 of solar collector, with a solar coefficient of performance (COP) between 0.10 and 0.16. The silica gel–water chillers studied can be powered by hot water warmer than 55°C. The COP is usually around 0.2–0.6, and in some commercially produced machines, it can be up to 0.7. The utilization of such chillers in CCHP systems, hospitals, buildings and grain depots are discussed. Despite their advantages, solid sorption systems still present some drawbacks such as low specific cooling power (SCP) and COP. Thus, some techniques to overcome these problems are also contemplated, together with the perspectives for their broad commercialisation. Among these techniques, a special attention was devoted to innovative adsorbent materials, to advanced cycles and to heat pipes, which are suitable devices not only to improve the heat transfer but also can help to avoid corrosion in the adsorbers. Recent experiments performed by the research group of the authors with machines that employ composite adsorbent material and heat pipes showed that it is possible to achieve a SCP of 770Wkg−1 of salt and COP of 0.39 at evaporation temperatures of −20°C and generation temperature of 115°C.

Open Adsorption System for an Energy Efficient Dishwasher

Optimization and testing on an adsorption dishwasher

Progress in Zeolite–water Adsorption Technologies for Energy-Efficient Utilization

A household dishwasher heated by a heat pump system using an energy storage unit with water as the heat source

Enhancing Energy Efficiency of a Dishwasher via Simulation Modeling

Adsorption Refrigeration- : an Efficient Way to Make Good Use of Waste Heat and Solar Energy

Recovery of greywater thermal energy with a wire on a tube heat exchanger attached to a dishwasher

Dishwasher and washing machine heated by a hot water circulation loop

Recent advances in adsorption heat transformation focusing on the development of adsorbent materials

Utilization of Waste Heat from Commercial Kitchen Exhaust for Water Heating and Dish Drying

Development and Optimization of a Novel Combined Heat Pump-Water Heater Combined Cycle System

Performance Exploration on a Small Sorption Device Extracting Water from Air for Museum Display Cases

Experimental Testing System for Adsorption Space Heating

A Small-Scale Silica Gel-Water Adsorption System for Domestic Air Conditioning and Water Heating by the Recovery of Solar Energy

Comparative study of various adsorbents for adsorption-based thermal energy storage

Utilizing waste heat from data centers with adsorptive heat transformation – Heat exchanger design and choice of adsorbent

Implementation of Fluidized Bed Concept to Improve Heat Transfer in Ecological Adsorption Cooling and Desalination Systems

Characterisation and comparative analysis of zeotype water adsorbents for heat transformation applications

Experimental Investigation of Energy and Exergy Performance of Short Term Adsorption Heat Storage for Residential Application

Design And Study Of A Novel System For Solid Desiccant Dehumidification

Efficient adsorption refrigerators integrated with heat pipes