Implementation of Fluidized Bed Concept to Improve Heat Transfer in Ecological Adsorption Cooling and Desalination Systems

Karolina Grabowska,Jaroslaw Krzywanski,Anna Zylka,Anna Kulakowska,Dorian Skrobek,Marcin Sosnowski,Radomir Ščurek,Wojciech Nowak,Tomasz Czakiert
DOI: https://doi.org/10.3390/en17020379
IF: 3.2
2024-01-12
Energies
Abstract:Sustainable development policy focuses on reducing the carbon footprint generated by the global industry and energy sector. Replacing conventional energy sources with environmentally friendly ones requires advanced research to increase energy efficiency and reduce the instability and intermittence of renewable sources. Moreover, adsorption chillers are an opportunity to introduce net-zero emission technologies to the refrigeration, air-conditioning, and desalination industries. Adsorption devices could be popularized if a method of effective heat transfer in the volume of the adsorption bed is developed. The innovative concept of introducing fluidized beds into the adsorption system can achieve the most promising results in improving energy efficiency. To confirm the adopted assumption, heat transfer coefficient calculations for the packed and fluidized bed were carried out in this paper based on experimental tests and literature data. The empirical research aims to extend the fundamental knowledge in the implementation of fluidization under low-pressure conditions, characteristic of the adsorption systems' working cycle. Experiments were conducted on a unique test stand equipped with the Intensified Heat Transfer Adsorption Bed (IHTAB) reactor prototype. Five adsorption bed samples were analyzed. The reference sample consisted only of silica gel, and the subsequent ones contained aluminum or carbon nanotubes with 5 and 10% additions. In the case of samples with admixtures, the fluidized state increased the heat transfer coefficient on average from approx. 36.9 W/m2 K to approx. 245.4 W/m2 K.
energy & fuels
What problem does this paper attempt to address?
This paper attempts to solve the following problems: 1. **Can fluidized - bed technology be effectively implemented under the operating conditions of adsorption refrigeration and desalination systems?** - The paper explores whether fluidized - bed technology can be successfully applied to adsorption refrigeration and desalination systems under low - pressure conditions to improve their performance. 2. **Can fluidized - bed technology improve the heat - transfer conditions in the adsorption bed?** - Through experimental research and calculations, the paper verifies the influence of fluidized - bed technology on the heat - transfer efficiency of the adsorption bed. Specifically, the paper analyzes the change in heat - transfer coefficients of different composition samples in the fluidized state. 3. **How does the composition of adsorption - bed samples affect heat - transfer parameters under fluidized conditions?** - The paper studies the influence of different adsorption - bed materials (such as silica gel, aluminum nanotubes, carbon nanotubes, etc.) and their doping ratios on heat - transfer performance. By comparing the heat - transfer coefficients of different samples, the effect of material composition on heat - transfer efficiency is evaluated. ### Background and Objectives The core objective of the paper is to improve the heat - transfer efficiency in adsorption refrigeration and desalination systems by introducing the concept of fluidized beds. Traditional adsorption beds (fixed beds) have the problem of low heat - transfer efficiency, which limits the energy - utilization efficiency of the system. Fluidized - bed technology can significantly increase the heat - transfer coefficient by enhancing the mixing and heat transfer between particles, thus providing support for the development of efficient and sustainable adsorption refrigeration and desalination technologies. ### Key Scientific Problems - **Improvement of Heat - Transfer Coefficient**: Through experimental measurement and theoretical calculation, the paper compares the heat - transfer coefficients of fixed beds and fluidized beds and proves the effectiveness of fluidized - bed technology. - **Realization of Fluidization under Low - Pressure Conditions**: Since the operating pressure of the adsorption system is low, the paper studies how to achieve a stable fluidized state under such conditions. - **Material Optimization**: The paper analyzes the influence of different adsorption - bed materials (such as silica gel, aluminum nanotubes, carbon nanotubes, etc.) and their doping ratios on heat - transfer performance, looking for the best material combination. ### Experimental Methods The paper uses an innovative laboratory test platform (Intensified Heat Transfer Adsorption Bed, IHTAB) to simulate the operating conditions of adsorption refrigeration and desalination systems. Through experimental measurement and formula calculation, the heat - transfer performance of different adsorption - bed samples in the fluidized state is evaluated. #### Formula Explanation The formula for calculating the heat - transfer coefficient used in the paper is as follows: $$ k=\frac{Q}{A\cdot\Delta T}\quad\text{(Unit: W/m²·K)} $$ where: - $k$: Convective heat - transfer coefficient; - $Q$: Power of the heat - transfer probe (W); - $A$: Heating surface area of the heat - transfer probe (m²); - $\Delta T$: Temperature difference between the surface of the heat - transfer probe and the thermocouple inside the adsorption bed (K). In addition, the paper also calculates the measurement error by the total differential method: $$ \Delta k = \left|\frac{\partial k}{\partial Q}\cdot\Delta Q\right|+\left|\frac{\partial k}{\partial A}\cdot\Delta A\right|+\left|\frac{\partial k}{\partial T}\cdot\Delta T\right| $$ Through these formulas and experimental data, the paper draws out the potential advantages of fluidized - bed technology in adsorption systems and provides directions for future research.