Potential assessment of biomass-based single-stage adsorption systems for refrigeration, cooling, and heat-pumping applications

P. R. Chauhan,S. Yagnamurthy,S. K. Tyagi

DOI: https://doi.org/10.1080/15435075.2024.2302048

IF: 3.206

2024-01-10

International Journal of Green Energy

Abstract:This article presents the performance estimation of a single-stage vapor adsorption system employing various carbon-based adsorbents with ethanol refrigerant, coupled with a small-scale biomass-based heating unit for space cooling, refrigeration, and heat-pumping applications. A detailed parametric investigation highlights the effects of operating temperatures, and heat exchanger to adsorbent mass ratio on specific cooling energy (SCE), coefficient of performance (COP), uptake efficiency (η u ), and mass of adsorbent to combustion fuel (m ad /m cf ) to identify the suitable adsorbent and sorption bed designs for each application. The numerical findings reveal that the flat-finned tube (FFT) adsorber outperforms traditional-finned tube (TFT) and tube & shell-type (T&S) adsorbers, achieving 19% and 30% higher COP, respectively, with biomass carbon-ethanol pair. The H 2 -treated Maxsorb-III shows the greatest optimal cooling COP (0.73), followed by the biomass-carbon (0.72) for refrigeration and space cooling. For heat pumping applications, biomass carbon-ethanol achieves the highest heat pumping COP (1.84) at a desorption temperature of 90°C, surpassing H 2 -treated Maxsorb-III. Further, the biomass-derived activated carbon requires the lowest amount of adsorbent per unit mass of combustion fuel in the biomass heating unit. The present thermodynamic analysis is a precursor for optimization of the potential heat-exchanger geometries and operating parameters, with the high-performance carbon adsorbents.

energy & fuels,thermodynamics,green & sustainable science & technology