Abstract:Adsorbent – heat exchanger (Ad-HEx) unit is a core of adsorptive heat transformation and storage (AHTS) systems as it largely determines their efficiency and power. Commercial gas-to-liquid HExs with finned flat-tube (FFT) geometry are often used in AHTS units, which are available on the market and tested in the labs. This communication addresses the problem of how to rationally select the optimal HEx among plenty of units offered on the market. The choice is often based on what is "at hand", on intuition or common sense rather than on the rational achievements of the thermal science. This communication addresses the first experimental validation of the applicability of the fin efficiency concept, earlier developed for gas-to-liquid FFT HExs, for adsorbent-to-liquid Ad-HExs used for AHTS, when fins transfer heat to the fixed adsorbent bed instead of the moving gas. The procedure is based on measuring the overall thermal conductance for three commercial FFT HExs with quite different geometric parameters. The measurements are performed under typical AHTS conditions by a Large Temperature Jump method. Composite LiCl/(silica gel) promising for adsorptive heat storage and air conditioning is used as a solid sorbent. The measured thermal conductance appears to be close to the conductance calculated according to the idealized procedure earlier developed for gas-to-liquid FFT HExs. Then, the geometrical and thermal parameters are analyzed for sixteen commercial FFT HExs, both described in the AHTS literature and selected among common automobile radiators. A linear relation between the HEx thermal conductance and the ratio ( S / m ad ) = (area of heat transfer surface)/(adsorbent mass) is found, which greatly simplifies the prediction of the HEx thermal behaviour. This approach can be recommended as an accurate and time-saving strategy for selecting commercial HExs and designing new HExs optimal for adsorption heat transformation and storage.

Recent advances in adsorption heat transformation focusing on the development of adsorbent materials

Recent advances of composite adsorbents for heat transformation applications

Adsorptive heat storage and amplification: New cycles and adsorbents

Progress in Zeolite–water Adsorption Technologies for Energy-Efficient Utilization

Adsorbent Coatings for Adsorption Heat Transformation: From Synthesis to Application

Recent updates on the adsorption capacities of adsorbent-adsorbate pairs for heat transformation applications

Permeability and Thermal Conductivity of Compact Adsorbent of Salts for Sorption Refrigeration

Performance Exploration of Temperature Swing Adsorption Technology for Carbon Dioxide Capture

Porous coordination polymers as novel sorption materials for heat transformation processes

Water Adsorption Dynamics on Metal–Organic Framework MOF-801: Comparative Study of Loose and Glued Grains, and Coatings

Adsorption Refrigeration- : an Efficient Way to Make Good Use of Waste Heat and Solar Energy

On the use of finned flat-tube heat exchangers for adsorptive heat storage and transformation

Zeolite Y Adsorbents with High Vapor Uptake Capacity and Robust Cycling Stability for Potential Applications in Advanced Adsorption Heat Pumps

Heat Transfer Design in Adsorption Refrigeration Systems for Efficient Use of Low-Grade Thermal Energy

Enhancement Of Heat And Mass Transfer In Solid Gas Sorption Systems

Analysis of different adsorption heat transformation applications and working pairs for climatic regions of Russia

Metal-organic Frameworks for Energy Conversion and Water Harvesting: A Bridge Between Thermal Engineering and Material Science

Synthesis and progress of thermosensitive adsorbents in heat and humidity treatment: A review

An optimal plate fin heat exchanger for adsorption chilling: Theoretical consideration

Adsorption Refrigeration: A Survey of Novel Technologies

A review on thermal performance enhancement of green cooling system using different adsorbent/refrigerant pairs