Abstract:Graphene has attracted extensive attention for the supply of electrically conductive, optically transparent, and mechanical robust electrodes for flexible optoelectrical devices, as an alternative to commercial indium tin oxide, due to its superior mechanical, electrical, and optical properties. However, conventional chemical vapor deposition is impeded by harsh conditions and complicated processes, and it is still a challenge to fabricate high-performance graphene transparent electrode in a facile and scalable solution-processable route. Herein, a wetting-induced scalable solution-processable approach to fabricate graphene hybrid with conductive ionogel and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS), i.e., graphene/:PSS (G/:PSS), for high-performance flexible transparent electrode (FTE) is reported, achieving a low sheet resistance of 30 Ω sq<sup>–1</sup> and a high transmittance of 88% at 550 nm. The as-fabricated trinary hybrid FTE as both transparent electrode and electrochromic layer is applied to a compact indium tin oxide (ITO)-free three-layered flexible electrochromic device, showing fast switching response, good electrochromic contrast, and reliable stability. Our work enables a scalable solution-processable approach for the generation of graphene-based FTE and functional devices.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c15734?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c15734</a>.Detailed experimental and computational methods, SEM and TEM images, XPS and Raman spectra, sheet resistance, transmittance and electrochromic performance, XRD, TGA, and DSC (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c15734/suppl_file/am0c15734_si_001.pdf">PDF</a>)Graphene film climbed up along a prewetted hydrophilic PET substrate (Movie S1) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c15734/suppl_file/am0c15734_si_002.mp4">MP4</a>)Graphene film cannot climb up along a hydrophobic PET substrate (Movie S2) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c15734/suppl_file/am0c15734_si_003.mp4">MP4</a>)This article has not yet been cited by other publications.

Optimization of TiO2/Cu/TiO2 multilayer as transparent composite electrode (TCE) deposited on flexible substrate at room temperature

Influence of Ag interlayer Thickness on the Optical, Electrical and Mechanical Properties of Ti-doped In2O3/Ag/Ti-doped In2O3 Multilayer Flexible Transparent Conductive Electrode

Scalable Fabrication of Scratch-Proof Transparent Al/F-SnO2 Hybrid Electrodes with Unusual Thermal and Environmental Stability

Study of Self-Cleaning and Low-Emission Properties of FTO/TiO2 Composite films

A 2D Titanium Carbide MXene Flexible Electrode for High-Efficiency Light-Emitting Diodes

Enhanced Electrochromic Properties of Donor–acceptor Polymers Via TiO2 Composite

Roll-to-Roll sputtered ITO/Cu/ITO multilayer electrode for flexible, transparent thin film heaters and electrochromic applications

Enhanced conductivity and stability of Cu-embedded zinc tin oxide flexible transparent conductive thin films

Achieving optimal balance: tuning electrical and optical characteristics of carbon electrodes for emerging photovoltaics

Flexible and high-performance electrochromic devices enabled by self-assembled 2D TiO2/MXene heterostructures

Tailoring the Opto-Electronic Properties of Oxide-Metal-Oxide Transparent Electrode Using Cu Seed Layer

Layer‐by‐Layer 2D Ultrathin Conductive Cu 3 (HHTP) 2 Film for High‐Performance Flexible Transparent Supercapacitors

Printable High‐Aspect Ratio and High‐Resolution Cu Grid Flexible Transparent Conductive Film with Figure of Merit over 80 000

Fabrication of flexible multilayer transparent electrode based on silver nanowire, graphene oxide, and poly(3,4-ethylenedioxythiophene): polystyrene sulfonate

Microscale Hybrid Additive Manufacturing of Ultra‐Fine, Embedded Cu/Ag(shell)–P4VP(core) Grid for Flexible Transparent Electrodes

Wetting-Induced Fabrication of Graphene Hybrid with Conducting Polymers for High-Performance Flexible Transparent Electrodes

Electrical and Optical Properties of Flexible Conductive Carbon Nanotube/ag/al-Doped Zinc Oxide Multilayer Coatings

Study of Optical and Electrical Properties of TiO2/Ag/TiO2 Multilayers

Studies on the Physical Properties of TiO2:Nb/Ag/TiO2:Nb and NiO/Ag/NiO Three-Layer Structures on Glass and Plastic Substrates as Transparent Conductive Electrodes for Solar Cells

Highly conductive transparent organic electrodes with multilayer structures for rigid and flexible optoelectronics

Oxide Heteroepitaxy for Flexible Optoelectronics.