Abstract:Square wave alternating current (AC) tungsten inert gas (TIG) welding possesses great advantages in welding stability, quality, flexibility, and cost in manufacturing thin-walled propellant storage tanks with 2219-T6 aluminum alloy. To solve the welding engineering problem of 4 mm-thick plates made by square wave AC TIG welding, we conducted process optimization experiments and performed common microstructure analysis and mechanical property testing. Tensile strength and microhardness reaching 63.8 and 83.1% of the base material appear in the optimal weld. The dendrite morphology, grain size, and eutectic content of all welds were compared and analyzed with optical microscopic observation, image segmentation, and grayscale statistics. The obtained quantitative results interpret the macroscopic properties of the optimal weld from a microscopic perspective. Shallow and uniform equiaxed dimples, evident tearing ridges, and second-phase particles were detected in the tensile fractures. Reticular, granular, and lath eutectic ( α (Al) + CuAl 2 ) were found in the interior and boundaries of dendritic solid solution ( α (Al)). Unexpectedly, the epitaxial growth of the columnar grains was inconspicuous or absent in all welds. Uniform and fine equiaxed grains occupy almost all welds of different process parameters, while the G/R ratio of these welds reaches 15-23 °C·s/mm^2, under which the equiaxed crystals should not have formed. We attributed the grain refinement in these welds to the secondary phase particles in base metal. They are broken into fragments during the multi-pass rolling process of plates, remain semi-dissolved under a fast cooling rate, and provide adequate heterogeneous nuclei for melt solidification. A further SEM and EDS test to base metal and secondary phase particles confirmed our findings and speculations. These results suggest that in the molten pool with sufficient heterogeneous nucleation, the mechanical blocking effect of heterogeneous nucleation may interfere with the thermodynamic effect of welding heat input and speed on grain structure.

Impact Welding of Aluminum AA1060 and Copper T2 Sheets by Vaporizing Foil Actuator: Microstructure, Mechanical Properties, and Electrical Conductivity

Impact Welding of Aluminum to Copper and Stainless Steel by Vaporizing Foil Actuator: Effect of Heat Treatment Cycles on Mechanical Properties and Microstructure

Dissimilar metals welding processes realized by vaporizing metal foils

Interfacial energy conversion mechanism between 3003 aluminum alloy and 321 stainless steel in vaporizing foil actuator welding process

Formation mechanisms and mechanical properties in aluminum cables and copper terminals ultrasonic welded joint

Effect of Ultrasonic Power on Microstructural and Mechanical Properties of Al/Cu Plasma Arc Welding–Brazing Joints

Joining Performance and Microstructure of the 2024/7075 Aluminium Alloys Welded Joints by Vaporizing Foil Actuator Welding

Research on Microstructure and Mechanical Properties of Square Wave Alternating Current Tungsten Inert Gas Welded Joints in 2219-T6 Aluminum Alloy

Microstructure and texture distribution in the bonding interface of Cu/Al composite tube fabricated by explosive welding

Microstructure and Mechanical Performance of FSWed Joint of T2 Copper and AA 1061

Microstructure and Mechanical Properties of Ultrasonic Welded Joint of 1060 Aluminum Alloy and T2 Pure Copper

Effect of interlayer thickness and gap distance on vaporizing foil actuator welding of 5A06 aluminium alloy and 321 stainless steel

Microstructure and Mechanical Properties of Resistance Heat-Assisted High-Power Ultrasonic Dissimilar Welded Cu/Al Joint

Effect of Ultrasound on Microstructure and Properties of Aluminum–Copper Friction Stir Lap Welding

Evolution of Precipitates in a Mechanical Vibration-Assisted Metal Inert Gas Welded Joint of 6082-T6 Aluminum Alloy Made with an ER5356 Filler Wire

Dynamic Weld evolution during ultrasonic welding of Cu–Al joints

Microstructure evolution and mechanical properties of Cu–Al joints by ultrasonic welding

In-Depth Characterization of Laser-Welded Aluminum-and-Copper Dissimilar Joint for Electric Vehicle Battery Connections

Impact of microstructure evolution on the corrosion behaviour of the Ti–6Al–4V alloy welded joint using high-frequency pulse wave laser

Microstructural characterization and mechanical properties of micro friction stir welded dissimilar Al/Cu ultra-thin sheets

Standoff-free vaporizing foil actuator welding: Process principle, experimental validation, and mechanisms analysis