Abstract:Electrospinning as a cost-effective process to synthesize nanofiber with controlled morphology and structure has regained attention in the last decade as result of rapid advancements in nanoscale science and engineering and their applications. Although there are a few works demonstrated the ability to fabricate nano gas sensor using electrospun nanofibers as sensing materials, there are limited works to show the optimization of the sensing performance by understanding the electron transport properties and their sensing mechanism. The overall objective of this work is to electrospun conducting polymer/insulating polymer composite nanofibers (i.e., (+)- camphor-10-sulfonic acid (HCSA) doped polyanline PANI (conductive) blended with PEO (non-conductive)) with different compositions (i.e., 12 to 68 wt.%) and apply them as chemiresistive sensing material to detect ammonia at room temperature. The diameter, defects, and morphology of nanofibers were adjusted by controlling solution composition, processing parameters and their effect toward the sensing performance were also investigated. Viscosity of electrospinning solutions was found to have a pronounced impact on fiber diameter and morphology of PANI/PEO nanofibers. Diameters around 350nm of different compositions of PANI/PEO nanofibers were achieved, where decreasing solution viscosity by increasing the PANI content resulted in a morphology changing from individual fibers to junctions. Although all the compositions of PANI/PEO nanofibers show semiconducting behavior and fit a three dimensional variable hopping range model, the activation energy and hopping distance increased as the PANI content decreased. The PANI/PEO nanofibers exhibited excellent sensitivity towards NH3 with fast response and recovery times where a low detection limit of 0.5 ppm with the sensitivity of 5.6 %/ppm of NH3 was achieved from 26 wt.% PANI/PEO nanofibers. Additionally, the PANI/PEO nanofibers response toward water vapor changed from positive to negative indicating the humidity independent ammonia gas sensor can be fabricated by controlling the composition of PANI/PEO nanofibers.

Mn-doped ZnO/SnO2-based yarn sensor for ammonia detection

Wearable smart yarn sensor based on ZnO/SnO2 heterojunction for ammonia detecting

Wool powder assisted colorimetric sensing yarn with high sensitivity for NH3 monitoring

Highly Sensitive NH3 Gas Sensors Based on Novel Polypyrrole-Coated SnO2 Nanosheet Nanocomposites

High Performance Gas Sensors Based on In-Situ Fabricated ZnO/polyaniline Nanocomposite: the Effect of Morphology on the Sensing Properties

Gas sensing behavior of polyvinylpyrrolidone-modified ZnO nanoparticles for trimethylamine

In Situ Prepared Composite of Polypyrrole and Multi-Walled Carbon Nanotubes Grafted with Sodium Polystyrenesulfonate As Ammonia Gas Sensor with Wide Detection Range

Micropored Sn-SnO 2 /carbon heterostructure nanofibers and their highly sensitive and selective C 2 H 5 OH gas sensing performance

Improved Ammonia Gas Sensing Performance at Room Temperature of Polypyrrole by Polyoxometalate Decoration

Electrospun Polyaniline/Poly(ethylene oxide) Composite Nanofibers Based Gas Sensor

Chemiresistive Ammonia Sensor Based on Cotton Yarn

Room Temperature Flexible Ammonia Sensor Based on Sb‐Doped SnO2/Polypyrrole Nanohybrid

MXene/MoS2 Nanosheet/polypyrrole for High-Sensitivity Detection of Ammonia Gas at Room Temperature

Zinc(II)porphyrin-poly(lactic acid) nanoporous fiber membrane for ammonia gas detection

Room-temperature high-performance ammonia gas sensor based on layer-by-layer self-assembled molybdenum disulfide/zinc oxide nanocomposite film

Mxene Anchored Fabric for Room-Temperature Operated Ammonia Sensing

MXene/MoS 2 nanosheet/polypyrrole for high-sensitivity detection of ammonia gas at room temperature

The Gas Sensor Utilizing Polyaniline/ MoS2 Nanosheets/ SnO2 Nanotubes for the Room Temperature Detection of Ammonia

Twistable and Tailorable Cu-doped SnO2@PANI Textile for Wearable Ammonia Sensing

Synthesis of ZnO nanorod arrays on Zn substrates by a gas–solution–solid method and their application as an ammonia sensor

Enhanced NH3 Gas Sensing Performance Based on Electrospun Alkaline-Earth Metals Composited SnO2 Nanofibers