Abstract:Mixing performance for a consecutive competing reaction system has been investigated in a swirling vortex flow reactor (SVFR). The direct quadrature method of moments combined with the interaction by exchange with the mean (DQMOM-IEM) method was employed to model such reacting flows. This type of reactors is able to generate a strong swirling flow with a great shear gradient in the radial direction. Firstly, mixing at both macroscale and microscale was assessed by mean mixture fraction and its variance, respectively. It is found that macromixing can be rapidly achieved throughout the whole reactor chamber due to its swirling feature. However, micromixing estimated by Bachelor length scale is sensitive to turbulence. Moreover, the additional introduction of ultrasound irradiation can significantly improve the mixing uniformity, namely, free of any stagnant zone presented in the reactor chamber on a macroscale, and little variance deviating from the mean environment value can be observed on a microscale. Secondly, reaction progress variable and the reactant conversion serve as indicators for the occurrence of side reaction. It is found that strong turbulence and a relatively fast micromixing process compared to chemical reaction can greatly reduce the presence of by-product, which will then provide homogenous environment for particle precipitation. Moreover, due to the generation of cavitation bubbles and their subsequent collapse, ultrasound irradiation can further intensify turbulence, creating rather even environment for chemical reactions. Low conversion rate was observed and little by-products were generated consequently. Therefore, it is suggested that the SVFR especially intensified by ultrasound irradiation has the ability to provide efficient mixing performance for the fine-particle synthesis process.

A draft tube to improve mixing in swirling flow-based solid–liquid mixing reactors

Numerical Investigation on Hydrodynamics and Heat Transfer of Highly Viscous Fluid in Sulzer Mixer Reactor

Fractal Injectors to Intensify Liquid-Phase Processes by Controlling the Turbulent Flow Field

Experimental Investigation of Flow Development in Large-Scale Bubble Columns in the Churn-Turbulent Regime

Bubble Size “bimodal” Distribution Enhances Mixing and Mass Transfer in Slurry Bubbling Column Reactor

Intensification of liquid mixing and local turbulence using a fractal injector with staggered conformation

Shear Turbulence Controllable Synthesis of Aggregated Nano-Particles Using a Swirling Vortex Flow Reactor Assisted by Ultrasound Irradiation

Performance Evaluation and Scale-up of the Swirl-Venturi Microdroplet Generator

Configuration of a Premixer and Grooved Surface to Intensify the Micromixing Performance of a Spinning Disc Reactor

Hydrodynamic Intensification and Interfacial Regulation Strategy for the Mixing Process of Non-Newtonian Fluids

Reactive mixing performance for a nanoparticle precipitation in a swirling vortex flow reactor

Study on the Flow Field Characteristics of a Liquid–Solid–Solid Three-Phase System and the Influence of a Draft Tube in a Stirred Reactor

Experimental and Numerical Study on Flow Resistance and Bubble Transport in a Helical Static Mixer

Numerical Simulation for Effects of Venturi Tube on Swirling Flow Field

Study on Thermal Mixing of Liquid–metal Free-Surface Flow by Obstacles Installed at the Bottom of a Channel

Exploration of Multishafts Stirred Reactors: An Investigation on Experiments and Large Eddy Simulations for Turbulent Chaos and Mixing Characteristics

Liquid Backmixing and Particle Distribution in A Novel Multistage Internal-Loop Airlift Slurry Reactor

Enhancing Miscible Fluid Mixing by Introducing Pseudo Turbulent Flow in Golden Ratio Spiral Microchannel

The Numerical Simulation of a New Double Swirl Static Mixer for Gas Reactants Mixing

Improved mixing of solid suspensions in stirred tanks with interface baffles: CFD simulation and experimental validation

Flow characteristics and mixing properties in a high velocity liquid—solid loop reactor