Abstract:Local temperature non-uniformity is a critical limit to power in large-area semiconductor lasers, playing a larger role than the conversion efficiency and temperature sensitivity in the most efficient modern devices. For the specific case of kilowatt-level edge-emitting diode laser bars, we demonstrate that laterally re-distributing current locally within each emitter using a customized micro-structuring of the electrical contact can flatten the thermal profile, based on the thermal design using COMSOL. The concept is demonstrated experimentally in adapted bars that contain eight broad-area emitters, each having wide (∼1100 μm) stripes and a 4 mm long resonator. Each emitter in the laser bar has an electrical contact layer that is electrically structured into parallel sub-contacts using implantation, essential to prevent lateral lasing, implemented here with a period of 29 μm. The width of the individual sub-contacts is narrowed in the device center and then monotonically increased toward the emitter edges to collect a higher proportion of heat at the edges, for a fivefold reduction in the thermal lens, despite a significant (20%) overall increase in electrical and thermal resistance. Two performance benefits are observed. First, the slope varies more slowly with average temperature, recovering (here) around half of the efficiency penalty from in-stripe temperature non-uniformity, and hence increasing the power conversion efficiency at 800 W optical output power by around 5%. Second, the lateral far field (95% power content) is narrowed by around 2° at 800 W optical output power, corresponding to a reduction of around half of the thermal contribution.

Enhancement of brightness in microchip laser with angular filtering mirrors

Machining and functional testing of adaptive micro-mirror array

Toward On-Chip Unidirectional and Single-Mode Polymer Microlaser

Laser Diode Side-Pumped Nd: Yvo4 Microchip Laser with Film-Etched Microcavity Mirrors

Tunable Laser Based On Composite Microchip Using Nd:Plzt As Both Tuning And Gain Medium

Microchip Laser Feedback Interferometer with an Optical Path Multiplier

Emission engineering in microdisk lasers via direct integration of meta-micromirrors

Micro-structured lateral thermal lens for increased output power and narrowed beam divergence in kilowatt-class 9xx nm diode laser bars

High-angle deflection of metagrating-integrated laser emission for high-contrast microscopy

Photonic crystal spatial filtering in broad aperture diode laser

Enhanced forward emission by backside mirror design in micron-sized LEDs

Exceptional-Surface-Tailored Robust Microlaser

Suppressing the Amplified Spontaneous Emission in the High-Power 1018-Nm Monolithic Fiber Laser by Decreasing the Feedback from the Inner Reflections

Beam Shaping of Edge-Emitting Diode Lasers Using a Single Double-Axial Hyperboloidal Micro-Lens.

Elimination of Spatial Hole Burning in Microlasers for Stability and Efficiency Enhancement

Enhanced beam quality of high-energy lasers utilizing fused silica as an all-solid-state SBS-PCM

Design of an Electromagnetic Micro Mirror Driving System for LiDAR

Elimination of Spatial Hole Burning in Microlasers

Airy beams from a microchip laser

Low voltage driving coupled-cavity electro-optically Q-switched microchip lasers

Ultra-low threshold lasing through phase front engineering via a metallic circular aperture