Abstract:Under antiplane deformation, the problem of the contact interaction of a thin infinite stringer of finite width with an elastic 3D wedge-shaped body of an arbitrary opening angle is considered. It is assumed that one face of the wedge is rigidly clamped while a stringer is attached to the other face, which does not extend to the top of the wedge. The deformation of a stringer is described by the well-known Melan model for antiplane deformation, and the stress–strain state of an elastic wedge is described by the equations of elasticity theory. Two formulations of the contact problem are discussed according to the two models of stringer deformation. In the first formulation, as usual, external tangential loads and concentrated forces acting on the stringer are specified, and it is required to determine the tangential contact stresses arising under the stringer and axial stresses in it. In the second formulation of the problem, the elastic displacements of the stringer points are predetermined; it is required to determine the force factors acting on the stringer that provide the specified mode of elastic displacements. Using the Mellin integral transform, solving the contact problem under consideration is reduced to solving a singular integral equation (SIE) with a kernel in the form of a sum of the Cauchy kernel and a regular kernel in the first formulation and to solving a Fredholm integral equation (IE) of the first kind with a symmetric logarithmic kernel in the second formulation. The solution of both integral equations is constructed by the method of mechanical quadratures, based on the use of well-known Gauss-type quadrature formulas for calculating singular integrals at Chebyshev nodes, as well as Gauss-type quadrature formulas for calculating integrals containing logarithmic and signum regular kernels. Ultimately, solving the equation is reduced to solving a finite system of linear algebraic equations (SLAE). A numerical analysis of the problem was carried out, and regularities in the change in the main mechanical quantities of the problem were revealed in a quite wide range of changes in the characteristic physical and geometric parameters.

On a contact problem of stringer–wedge interaction in antiplane deformation mode

Complex Variable Formulation for Non-Slipping Plane Strain Contact of Two Elastic Solids in the Presence of Interface Mismatch Eigenstrain

Transforming Calculated Schemes in Geometrically Non-linear Mechanics Problems of the Sandwich Plates with Contour Reinforcing Beams

Finite Deformation Mechanics In Buckled Thin Films On Compliant Supports

A new method of solving plane-strain boundary value problems for the double slip and rotation model

The Effects of Anisotropic Surface Elasticity on the Contact Problem in an Anisotropic Material

Aspects of modeling and numerical simulation of dry point contacts between viscoelastic solids

Axisymmetric Hertzian Contact Problem Accounting for Surface Tension and Strain Gradient Elasticity

Adhesive Contact of Flat-Ended Wedges: Theory and Computer Experiments

The Scale-Dependent Deformation Model of a Layered Rectangle

The Contact Problem in A Compressible Hyperelastic Material

A Consistent Finite-Strain Plate Model for Wrinkling of Stretched Anisotropic Hyperelastic Films

A Wrinkling Model for General Hyperelastic Materials based on Tension Field Theory

A frictional contact problem with wear diffusion

Incompatible Deformations in Hyperelastic Plates

A GENERALIZED MAUGIS MODEL FOR ADHESIVE CONTACT OF ARBITRARY AXISYMMETRIC ELASTIC OBJECTS

Debonding of an Elastic Inhomogeneity of Arbitrary Shape in Anti-Plane Shear

Theoretical analysis of growth or swelling wrinkles on constrained soft slabs

Semi-analytical Study of Microscopic Two-Dimensional Partial Slip Contact Problem Within the Framework of Couple Stress Elasticity: Cylindrical Indenter

Interface Mismatch Eigenstrain of Non-Slipping Contacts Between Dissimilar Elastic Solids

A Generalized Antiplane Singularity Within a Semi-Infinite Wedgeof Arbitrary Angle