Abstract:Allowable stresses for pipes with circumferential flaws are provided by the ASME Code Section XI. The stresses for the high toughness pipes are determined by fully plastic collapse stresses and safety factors. The plastic collapse stresses are estimated by limit load criteria, which are also provided by the ASME Code Section XI. When applied stresses of the pipes at the flaw locations are less than the allowable stresses, the flaws are acceptable for the end-of-evaluation period. The allowable stresses are categorized for various service-level conditions of the plant operation. When pipe walls are thin, part-through flaws can easily develop into through-wall flaws, and the likelihood of coolant leakage is high. The ASME Code Section XI provides final allowable flaw angles of through-wall flaws that are a limit on the length of part-through wall flaws for thin-walled pipes. The final allowable angles are currently applied to pipes in order to maintain structural tolerance if the part-through flaws become through-wall flaws. To ensure that this stability is not compromised, plastic collapse stresses for through-wall flaws are combined with the allowable stresses. However, the final allowable angles of through-wall flaws are not identified for thin-walled pipes. This paper compares plastic collapse stresses of through-wall flaws and allowable stresses of part-through flaws for pipes. The comparison of these stresses is used to derive the final allowable angles of through-wall flaws. The angles can be expressed either in the form of exact solutions or as conventional options that are appropriate for various service-level conditions.

Applicability investigation on failure assessment diagram of ASME code section XI - Appendix H for ferritic nuclear piping

FAD Method for Explosion Containment Vessels Based on API 579 - 1/ASME FFS - 1

Experimental Investigation on the Limit Load Estimation Method for Pipes Containing a Circumferential Surface Flaw with Complicated Shape

Failure Bending Moment of Pipes Containing Multiple Circumferential Flaws with Complex Shape

Fracture and Fatigue Assessment on Submarine Pipelines with Crack Damages

Unified Constraint-Based FAD Assessments for Ductile Fracture in Cracked Pipes

Prediction of Collapse Stress for Pipes with Arbitrary Multiple Circumferential Surface Flaws

Failure Bending Moment for Pipes with an Arbitrary-Shaped Circumferential Flaw

Experimental Verification on Limit Load Estimation Method for Pipes with an Arbitrary Shaped Circumferential Surface Flaw

Fracture Estimation Method for Pipe with Multiple Circumferential Surface Flaws

Stability of Allowable Flaw Angles for High Toughness Ductile Pipes Subjected to Bending Stress in the ASME Code Section XI

Safety assessment of steel structure component with crack defects using SINTAP-FAD method

Study on Failure Assessment Curves for Safe End of Nuclear Pressure Vessels

Limit Load Estimation Method for Pipe with an Arbitrary Shaped Circumferential Surface Flaw

Prediction of Failure Bending Moment for a Pipe with an Arbitrary-Shaped Circumferential Flaw

Effects of Initial Crack Location on Failure Assessment Curves in Dissimilar Metal Weld Joints in Nuclear Power Plants

Integrity Assessment of Defected Structure at High Temperature with a Material Database

TDFAD Approach to High Temperature Defect Assessment and Its Engineering Application

ICONE19-43138 Prediction of Failure Bending Moment for a Pipe Containing Multiple Circumferential Cracks with Complex Shapes

Developments of Strain-Based Failure Assessment Diagram Applications: Measuring Reference Strain by Displacement and a Modified Assessment Method

Analysis of Recent Fatigue Data Using the Structural Stress Procedure in ASME Div 2 Rewrite