A Unified Optimal Modulation Strategy for DAB Converters to Trade-off the Backflow Power Reduction and All ZVS in the Full Operating Range
Shanglong Li,Xibo Yuan,Zijian Wang,Kai Wang,Yonglei Zhang,Xiaojie Wu
DOI: https://doi.org/10.1109/jestpe.2023.3312298
IF: 5.462
2023-01-01
IEEE Journal of Emerging and Selected Topics in Power Electronics
Abstract:The backflow power in dual active bridge (DAB) converters can cause power circulation in the H-bridge instead of flowing to the load, which increases the power loss of switching devices and magnetic components and lowers the system efficiency. Hence, a unified optimal modulation strategy (UOMS) is proposed in this article to reduce the backflow power and consequently improve the system efficiency. However, there is a conflict between minimizing the backflow power and achieving the zero-voltage-switching (ZVS) conditions of all the switching devices. Hence, a regulatory factor ‘γ’ is introduced into the control variables to minimize the backflow power on the premise of all ZVS conditions and hence comprehensively improve the system efficiency. Moreover, the regulatory factor ‘γ’ simplifies the calculation form of the control variables, which is easier to be performed in the controller and can effectively shorten the computational time. According to the value ranges of the control variables (D0, D1, D2) in the proposed UOMS, twelve operating modes are classified and four effective modes are detailed. For the four effective modes, the optimal triple-phase-shift (TPS), optimal primary-dual-phase-shift (PDPS), optimal secondary-dual-phase-shift (SDPS) modulation strategies are derived and their switching relationships are revealed. With various transferred power, the proposed UOMS combines the optimal TPS, PDPS, SDPS and SPS modulation strategies, and can realize smooth and seamless transition switching processes among them in the full operating range. Therefore, the DAB converter can always operate in the optimal states for the full operating range of both the ‘Buck Mode’ (k>1) and ‘Boost Mode’ (k<1). Finally, experimental results verify the correctness of the theoretical analysis and the effectiveness of the proposed UOMS.
engineering, electrical & electronic