Abstract:Multi-level dual-active-bridge (DAB) DC-DC converters offer higher voltage-blocking capability and larger stepup ratios, as well as increased number of degrees of freedom (DoFs) compared to the traditional two-level DAB converter. Thus, it has potential to be used in medium-voltage DC (MVDC) systems. However, the control complexity of the multi-level DAB converters also increases along with the number of DoFs. When soft-switching is considered as an optimization objective together with other performance indices (e.g., peak or root-mean-square values of the inductor current), the analytical solutions will be difficult to derive due to the increased number of control variables and complicated soft-switching constraints. To address this issue and improve the efficiency of the DAB converter, this paper proposes a control strategy for a multi-level DAB converter to achieve both soft-switching and minimum current stress simultaneously. The analytical solutions are calculated by improved Karush-Kuhn-Tucker (KKT) conditions, where the numerical solutions are used to locate the operating modes and determine the zero-voltage-switching (ZVS) boundaries. This can simplify the Lagrangian function and inequality constraints, and then, the analytical solutions can be obtained by the simplified KKT conditions. In addition, a comprehensive comparison between the quasi-ZVS and strict-ZVS control is carried out, so that the converter efficiency, implementation complexity, and smooth transition between different power levels can be compromised for practical applications. Finally, the performances of the proposed control strategy in terms of current stress minimization and softswitching operation are validated by experimental tests.

Improved Active Disturbance Rejection Control for the DAB Converter with 4-DF Modulation

ZVS Operation of DAB Converter Based on Triple-Phase-shift Modulation Scheme with Optimized Inductor Current

Neural Network-Aided 4-DF Global Efficiency Optimal Control for the DAB Converter Based on the Comprehensive Loss Model

Analysis and Optimal Modulation for 2/3-Level DAB Converters to Minimize Current Stress with Five-Level Control

An Optimized Modulation Strategy for the Three-Level DAB Converter With Five Control Degrees of Freedom

A Fundamental Harmonic Analysis-Based Optimized Scheme for DAB Converters with Lower RMS Current and Wider ZVS Range

Adaptive Integral Sliding Mode Control Based Radial Basis Function Network for Bidirectional Isolated Dual Active Bridge Converter

Dynamic Control of Three-Phase Dual-Active-Bridge DC-DC Converters Based on Sliding-Mode-Learning Adaline

Multi-Objective Optimization Method Based on Double-Side Asymmetrical Modulation Scheme for DAB-Based DC-DC Converter

Adaptive Active Disturbance Rejection Control of DAB Based on PSO.

Unilateral Asymmetric Triple Phase Shift Modulation Strategy for DAB Converter Compromising RMS Current and Soft-Switching Range

Smooth Closed-loop Control Strategy Design for Dual-Active Bridge Converters Using Optimized TPS Modulation

Optimal Control of Multi-Level DAB Converters for Soft-Switching and Minimum Current Stress

Improved linear active disturbance rejection control for double active bridge series resonant converter with high voltage gain

A Conduction Losses Optimization Strategy For Dab Converters In Wide Voltage Range

A Four‐Degrees‐of‐Freedom Modulation Strategy for Series Resonant DAB DC‐AC Application

A Novel Asymmetric Duty Modulation Control of Dual-Active-Bridge for LVDC Applications

Novel asymmetric duty modulation for DAB converters to improve light load efficiency

Overview of Multi-Degree-of-Freedom Modulation Techniques for Dual Active Bridge Converter

A Multi-Degree-of-Freedom Modulation Strategy for Push-Pull DAB Converter

Improved dynamic response strategy with dual phase‐shift control for dual‐active‐bridge DC–DC converter